GATES - 1132 Annonces

Vendredi 16 juin 2023

Carbo, a professional bronze valve supplier, provides high-quality brass ball valve with drain port, which has the lowest flow resistance. Because it will not get stuck during work, it can be reliably used in corrosive media and low-boiling liquids. In a larger pressure and temperature range...

Vendredi 16 juin 2023

About Carbo Valves As a professional OEM brass valve supplier and bronze valve factory, we can produce high-quality bronze valves and superior brass valve for water for you. If you want to buy brass valve of great quality, our diverse product categories can meet your needs. Brass...

Mardi 06 juin 2023

RFID Gate ONTIME Gate integrates our high-performance high-power reader system, which can quickly identify UHF RFID electronic tags in any direction in the three-dimensional space of the device sensing area; the channel identification distance can be up to 300CM. This product can...

Mercredi 31 mai 2023

Prix : 8 000,00 €

Stratix 10 GX 10M With its latest Intel Stratix 10 FPGA technology, the S2C Prodigy Intel Stratix 10 GX 10M FPGA module is compatible with 90+ Prodigy daughter card libraries, with a maximum capacity of up to 318 M ASIC gates in one FPGA. S2C's Stratix 10M Prodigy Logic System enables...

Mercredi 31 mai 2023

Prix : 8 000,00 €

Arria 10 Board S2C's Arria 10 Prodigy Logic System, built on the Intel Arria 10 GX 1150, is an affordable solution for a variety of design sizes and applications. The Single A10 Prodigy Logic System is perfect for both prototyping small- to medium-sized SoCs and high-performance computing...

Mardi 30 mai 2023

Technology Specification: The design meets the requirement of API SPEC 6A Nominal bore: 2”-4″ Rated working pressure: 5000-15000PSI Rated working temp: K、L、P、R、S、T、U、V Material class: AA, BB, CC, DD, EE. FF Product specification level: PSL1-PSL3G Performance requirement level: PR1...

Mardi 30 mai 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Generally, the temperature-sensitive wire is composed of steel wire insulated with a heat-sensitive material, the temperature sensing wire is commonly known as the "thermocouple", and there are many types, but hot runner mould thermocouple has two types: standard type J and type K...

Mardi 30 mai 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Large drop of automotive mold top and bottom; The automotive mold technology is complicated; The injection system is many and complicated; The mold cost is ver high. AUTOMOTIVE MOLD TYPES Automotive AC Air Outlet The air outlets of automotive AC are generally assembled by multiple parts...

Mardi 30 mai 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Automotive Parts Mold Molded automotive parts features: 1. The part material is made by PP-TD20 normally, the part surface will make leather texture which is very high, and he product surface is not allowed to have thimble marks, gate marks, sink marks, welding marks and flash or...

Vendredi 26 mai 2023

RFID Wholesale Invengo's elaborate product offering, containing (handheld) readers, antennas, smart devices and consumables, are designed to enable end-users to reach and sustain high levels of performance in all global RAIN RFID or HF/NFC frequency regions. Excellent performance...

Jeudi 25 mai 2023

Prix : 100USD

2k injection molding is one type of injection mold. 2k molding is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years...

Mardi 23 mai 2023

The pneumatic 3 way ball valve from UTMOST pneumatic ball valve factory can be used under extremely harsh application conditions, such as high temperature, high pressure, high frequency, abrasion, corrosive medium, and crystalline medium. The stainless steel pneumatic ball valve has...

Mardi 23 mai 2023

UTMOST, as one of the most professional knife edge gate valve manufacturers in China, sticks to providing high performance automatic knife gate valve at a very attractive price. As one of pneumatic knife gate valve manufacturers, we offer pneumatic knife edge gate valve and pneumatic...

Mardi 23 mai 2023

UTMOST china gate valve manufacturer is one of the best China gate valve manufacturers and China gate valve suppliers. We provide gate valves of various materials, such as Inconel, Monel, and Hastelloy alloy on offer. Actuators are both on electric and pneumatic options; And the inside...

Mardi 16 mai 2023

Hangar Door for Sale The hangar door refers to the door specially set for the aircraft to enter and exit the hangar. Due to the large size of the door opening and PVC door body, the structure, material selection, driving mode and installation of the hangar doors are quite different...

Mardi 16 mai 2023

The electro-hydraulic swing door is opened by the motor and closed by the hydraulic door closer. Its structure and working principle are that the electric motor drives a heavy hydraulic door closer through an oil pump to realize the door opening process, and then the door closer closes the door...

Mercredi 10 mai 2023

Quantité : 100

Recréez l'incroyable architecture de San Francisco avec ce modèle de la Collection Skyline LEGO® Architecture 21043. Cet ensemble LEGO à collectionner comprend des attractions et des monuments emblématiques de San Francisco, notamment les célèbre bâtiments « painted ladies », 555...

Mercredi 10 mai 2023

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

From standard applications to high-end ones, Otalum offers a wide range of aluminum fencing and handrail products, and these aluminium fence panels and extruded aluminum rails have been widely used in residential areas. Otalum has a lot of experience in aluminum handrail extrusions...

Samedi 06 mai 2023

China cast steel gate valve produced by MstnLand, a China gate valves manufacturer, can be used in many situations. The opening and closing part of a rising stem gate valve is the gate, and the movement direction of the gate is perpendicular to the direction of the fluid. The china...

Samedi 06 mai 2023

RISING STEM VS NON RISING STEM GATE VALVE We all know that a gate valve needs to be installed to build a building, but the gate valve has two types of open rods and dark rods, and many users do not understand the situation. What is the difference between a rising stem gate valve and...

Samedi 06 mai 2023

MstnLand provides industrial valves selection and procurement solutions for our clients with one-stop consultation and supply. TYPES OF INDUSTRIAL VALVES As a professional industrial valve supplier, MstnLand provides various high performance valves. With our own wholesale valves production line...

Vendredi 28 avril 2023

As a container for nucleic acid detection, there is a huge amount of consumption every day in the world. How to produce with high efficiency and high quality is a difficult problem for medical products enterprises. Medical Test Tube Mold As a container for nucleic acid detection,...

Mardi 18 avril 2023

Valves Used in Oil and Gas Industry Pipelines and valves used in offshore oil and gas are subject to salt mist corrosion due to the marine atmospheric environment, seawater, seabed sediments, and transported fluids. Special alloy valves can bear better corrosion resistance and longer...

Mardi 18 avril 2023

For onshore oil and gas pipelines, we recommend the use of titanium, nickel aluminum bronze, duplex stainless steel, and other materials to make the required valves. These materials guarantee longer service life and replacement cycle, which means helping you save project cost and...

Mardi 18 avril 2023

CHENZHU e stop safety relay are suitable for the application of emergency Stop button and safety gate. Support 2 safety output contacts (N/O) and 2 auxiliary output contacts (N/C) or 3NO+1NC or 2NO+2NC or 2NO+1NC+3NO(t)+1NC(t). Emergency stop relay can be operated in single or double...

Mardi 18 avril 2023

2k plastic injection moulding is one type of injection mold. 2k two color molding is also named as two shot molding, double shot mold, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors...

Mardi 18 avril 2023

Prix : 1000-6000USD

We are an excellent manufacturer of all kinds of valves in China. The company's supporting mud gate valve has reliable design and heavy load performance under corrosive conditions, and is widely used in some oilfield applications, including: 1. riser manifold; 2. install the manifold...

Jeudi 13 avril 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

2K Molds The rotary mold is composed of two-cavity and core sides, the two core sides are the same, only the cavity sides is different which the second color cavity is bigger than the first color, at the beginning of injection molding, the barrel of the two-color injection molding...

Mardi 11 avril 2023

The ONTIME alarm deactivator is a device that provides an easy way to deactivate different types of security tags, including soft labels, adhesive labels, and disposables. With its flexible design, the rfid deactivator can work with both AM and RF systems, making it a versatile solution...

Samedi 08 avril 2023

Geko pneumatic actuators used compressed air to exert force on a cylinder piston and thus push or pull it in a specific direction. The motion of the piston is delivered to the parts to be moved via the piston rod or magnetic friction closure. A pneumatic cylinder is an actuator operated...