COMPOUND - 2005 Annonces

Mercredi 20 mars 2024

[Brief information] 1. An anionic surfactant with excellent wetting and dispersibility and biodegradation that has slight irritation to human skin. 2. Widely use in home chemicals, pigments, printing & dyeing, asbestos, pesticides, paper making, leather, etc. 3. Use for emulsifier...

Mercredi 20 mars 2024

[Brief information ] Sulfur dye fixing agent is a formaldehyde-free fixing agent, mainly used in post-treatment of vulcanized dye fabrics and obviously all fabrics' fastness. [Main composition] --Polycation polyamine compounds. [General properties ] -- Appearance: Colorless to pale...

Mercredi 20 mars 2024

[Brief information] In high temperature and high pressure conditions, stripping agent HD is to prompt the fabric dyes from high concentration to low concentration or solution to transfer, suitable for polyester dyeing repair color, leveling and stripping. [Main composition] Mixtures...

Mercredi 20 mars 2024

[Main composition] High-molecular polymer [General properties] Appearance: colorless and transparent liquid Ionicity: nonionic Solubility: soluble in water Compatibility: can use with cationic and non-ionic additives in one bath [Product features] The meaning of stiffening agents...

Mercredi 20 mars 2024

RTV Silicone Rubber Silicone rubber is a straight chain of high molecular weight polysiloxane, molecular weight is generally more than 150,000, its structure is similar to silicone oil. RTV-2 adhesive has heat, cold, weather, arc resistance, and electrical insulation properties. It...

Mercredi 20 mars 2024

Name: Polydimethylsiloxane (Methyl Silicone Oil) Melt Point (℃): -59 Spontaneous combustion point (℃): 450 Saturated vapor pressure (KPa): No Data Explosive: No Data Solubility: Soluble in benzene, toluene, ethylene, ethyl ether, partially soluble in ethanol, butanol, acetone, insoluble...

Mercredi 20 mars 2024

Product Name: Hexamethylcyclotrisiloxane Molecular Formula: [(CH3 ) 2 SiO]3 Molecular Weight: 222.47 CAS No.: 541-05-9 UN No.: 1325 Physical and Chemical Properties: Melting Point: 64℃ Boiling Point: 134℃ Relative Density (water=1): 1.12 Appearance: White crystalline lens. Technical...

Mercredi 20 mars 2024

Chlorosilanes are a class of liquids that range in color from clear colorless to light yellow colored. A clear to light yellow liquid. Slightly more dense than water. Contact may burn skin, eyes and mucous membranes. May be toxic by ingestion, inhalation, and skin absorption. Used...

Mardi 19 mars 2024

Anti block Masterbatch is used to enhance the surface properties of plastic film. They increase friction and resistance without affecting heat sealing and printing performance. Additionally, "0 VOC" Antiblock Masterbatches are available, which have zero volatile organic compounds...

Samedi 16 mars 2024

Prix : 1-100

BMC SMC thermosetting plastic products are produced by SMC and BMC molding process. PRODUCTS Types of BMC/SMC Molded Products BMC/SMC Motor SMC/BMC plastic edging motor change the traditional material of iron and aluminum to reduces the process but seals more. Servo Motor Plastic-Envelop...

Samedi 16 mars 2024

Prix : 1-100

SMC Antenna Reflector Mould The satellite earth antenna is the important earth satellite equipment to collect the weak signal from satellite and reduce noise to the lowest level within its ability. The traditional materials for satellite antenna are iron or aluminium. But the better...

Samedi 16 mars 2024

Prix : 1-100

Flange Molding Flanged joint is the main connection method in pipeline construction. Compared to thermoplastic, thermoset composite can be reprocessed. With high insulating properties, Insulated flange is widely applied in petroleum and chemical and other industries. Flange molding...

Samedi 16 mars 2024

Prix : 1-100

BMC/SMC Electric Motors Description BMC plastic edging motor replaces traditional iron and aluminum, reduces the process, seals more, and has higher safety factor. It mainly refers to white goods and public motors. High insulation, chemical resistance, high fire resistance, good water resistance...

Samedi 16 mars 2024

Prix : 1-100

BMC Car Parts Mould Automobiles are different in size and shape. That means automobile suppliers always need flexible auto parts molds, once there occurs a new model of automobile. Over 90% of auto parts production depend on mold. BMC and SMC auto parts molds enable massive production...

Samedi 16 mars 2024

Prix : 1-100

SMC Auto Parts Description Auto parts made from sheet molding compound (SMC) are typically 25-35% lighter than steel parts and aluminum products of the same strength. The stroke is increased and the fuel consumption is greatly reduced. SMC Auto Parts Car Bumper Battery Box Enclosure...

Samedi 16 mars 2024

Prix : ￥30~200 RMB

18mm Sensor Mounting Bracket For AG-49/AG-59 series only, PCF Bracket is a 18mm sensor mounting bracket that is fixed to the tie rod cylinder below φ250～φ320. Ensure accurate and stable sensor installation with ALIF Sensor's 18mm sensor mounting bracket. Durable materials and precise...

Samedi 16 mars 2024

Prix : 1-10usd

Good's buffer has the following characteristics: 1. High water solubility; 2. Low cell membrane permeability; 3. stable acid-base dissociation constant; 4. Low metal chelating capacity; 5. High chemical stability; 6. Low absorption spectra in ultraviolet and visible region;7. Low salt effect; 8...

Vendredi 15 mars 2024

Based on the principle of "early detection and early disposal", advance detection and early warning (extremely early detection) should be carried out for Lithium Battery thermal runaway in the Storage tank at the initial stage, and accurate multiple point spraying should be used to...

Vendredi 15 mars 2024

Fiberglass Mesh Tape China fiberglass mesh tape is an incredibly versatile and essential material for a variety of applications. From drywall repair and reinforcement to waterproofing, this useful material provides strong, durable adhesion and protection from harsh environmental factors...

Mercredi 13 mars 2024

Phthalic anhydride is an organic compound, C8H4O3, which is a circular anhydride formed by the dehydration of phthalic acid molecules. Phthalic anhydride is a white solid, it is an important raw material in the chemical industry, especially used in plasticizer manufacture. HS code...

Mercredi 13 mars 2024

Methyl methacrylate china, whose chemical formula is C5H8O2 and chemical formula quantity is 100.12, is an organic compound, also known as MMA, or methyl ester for short. HS code for MMA is 2916140010. MMA methacrylate is an important chemical methacrylate raw material and the production...

Mercredi 13 mars 2024

MEK supplies is a clear colorless volatile liquid with a pleasant pungent odor. MEK is the butanone common name (Other Names: Butanone, 2-butanone for sale, Methyl acetone). HS code for MEK is 29141200. Widely used in applications of coating, adhesives, PU coating, MEKO, printing inks...

Mercredi 13 mars 2024

Wide phthalic anhydride applications Phthalic anhydride is an important industrial chemical. Due to phthalic anhydride properties, it has a very wide range of applications. The uses of phthalic anhydride not only include dyes, agricultural products, but also include pharmaceuticals...

Mercredi 13 mars 2024

Coating(MMA Application) The coating is coated in the surface of the object being protected or decorated and can form a firm adhesion of continuous film with the coated object. Polymethyl Methacrylate（PMAA） Polymethyl Methacrylate is a colloquial name for PMMA. The chemical name of...

Mercredi 13 mars 2024

Textile sizing chemicals is the general term for all-natural and synthetic polymers used in textile systems engineering for their viscous properties. Specifications of Textile Sizing Agent Textile sizing agent must have strong adhesion, high cohesion, can form a layer of skin film...

Mercredi 13 mars 2024

Methylethyl ketone oxime is the organic compound with the formula C2H5C(NOH)CH3. This colorless liquid is the oxime derivative of methyl ethyl ketone. MEKO, as it is called in the paint industry, is used to suppress the "skinning" of paints: the formation of a skin on the paint before it is used...

Mercredi 13 mars 2024

The adhesive is a kind of material with good adhesion property. The act of binding objects together by surface adhesion and cohesion. Specifications of Adhesive Adhesive, also known as glue, cement, mucilage, or paste, is any non-metallic substance applied to one or both surfaces...

Mardi 12 mars 2024

Quantité : 10,000+ - Prix : $0.1 - $1,000

CNC Turning China Provide the best custom CNC lathe machining service at most competitive prices and short lead time as well as wide range of material selection for machinable metal part such as aluminium, stainless steel, copper, brass,.. and plastic part such as ABS, bakelite, POM...

Mardi 12 mars 2024

Nylon Non-standard Parts Nylon is a tough angular translucent or milky white crystalline resin, as engineering plastics nylon molecular weight is generally 15-30,000. Nylon has high mechanical strength, high softening point, heat resistance, low coefficient of friction, abrasion resistance...

Vendredi 08 mars 2024

Prix : USD1100-2500/MT

Skyswan Deodorized Cocoa Butter Bulk Wholesale The Skyswan deodorized cocoa butter wholesale bulk is 100% pure, and has a neutral taste and pale yellow color, F.F.A.: 1.75% max, packed in 25kg net cartons with inner polythene liner. Discover the pinnacle of quality and versatility...