MOLD|FILTER - 8165 Annonces

Mercredi 12 avril 2023

ULPA (Ultra Low Air Filter) is on the basis of HEPA by further improving the filtration efficiency. It was defined to remove at least 99.999% of particle size in 0.12 μm diameter, or 99.9999% of 0.3μm diameter particles in some ways. Mingguan manufactures and provides high-quality...

Mercredi 12 avril 2023

PP and PET nonwovens are commonly used in filtration industries as direct filter media, protection layers, and carrier layers. Manufacturing process and fiber structures could be various depends on specific performance requirements. We provide different types of nonwovens with wide...

Mercredi 12 avril 2023

pp meltblown fabric is made up of 1 to 5 micron (μm) fine fiber and providing excellent filtration performance as a core media in many filtration system. Mingguan utilizes state-of-the-art production lines and patented production technologies with benchmark testing facilities to ensure...

Mercredi 12 avril 2023

Nanofiber filter media is composed of nano scale diameter fibers. Small size effect gives nano fibers excellent properties and finer diameter. With smaller pore size and higher porosity, it can be widely used in many applications. Mingguan Micro-nano fiber fabric is combined nanofiber...

Mercredi 12 avril 2023

HQ team has been providing copper based casting products for the customers nearly 20 years. Not only our stable quality but also the wonderful after-service allow us to be trusted by customers. We keep improving our technology and management that ready to serve more customers all over the world...

Mardi 11 avril 2023

Our exclusive designed bottle rack guides the steam and hot air straight into the bottles. The dome lid circulates steam efficiently and has a heat-resistant handle.This process helps promote high efficient sterilize & drying. Also, special designed air rotator that helps increase...

Mardi 11 avril 2023

Prix : MSRP US$10K~US$450K

Stereolithography 3D Printer for Sale Printer 3d sla light source is a tiny pin dot of light. This pin dot reflects off of a rotating mirror and into the resin vat, drawing each layer as it goes. Because it must trace each part, laser printers are much slower for large jobs. RSPro...

Samedi 08 avril 2023

The low pressure casting machine is to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting part with the pressure as well. The pressure is powered by the inert gas or compressed air inside the sealed crucible, pressure push...

Samedi 08 avril 2023

Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, this method of making the casting products is so-called sand casting. There are several different kinds of sand applying to industrial...

Samedi 08 avril 2023

High precision die casting involves 3 key elements: the die casting machine, the mold, and the alloy materials, and the die casting could be described as the process of combining pressure, speed, and time to achieve an ideal cast metal part. The pressure applied during the casting...

Samedi 08 avril 2023

Quantité : 200sets pe - Prix : 100-5000

ZP series vertical sump slurry pump is specially designed for various oil sump conditions and can also be used for floating dewatering or other floating pump platforms. As a cantilevered china vertical slurry pump, ZP series pumps have no underwater bearings or seals; Thereby avoiding...

Samedi 08 avril 2023

Quantité : 200 - Prix : 100-5000

GNWQ series sewage cutting pump non-clogging submersible sewage water pump is suitable for 0-20 meters, large flow, medium and low head use, full head, low energy consumption. The product also adopts an easy-to-remove cutter head design, which can be replaced with different forms...

Vendredi 07 avril 2023

Quantité : 30000M eac - Prix : 0.2-2.0USD/M

Flat dripper drip tape : flat drip tape uses plastic hose to send water to the roots of crops for local irrigation through drippers on a capillary with a diameter of about 16mm. It is through the dripper or flat drip irrigation hose that the outflow orifice is very small, and the...

Vendredi 07 avril 2023

Quantité : Quantities

Sibai has percentage orders of die casting, from Aluminium alloy and Zinc alloy (Zamak) material. The die casting can realize complex inner structure by the casting die, and can make large quantity. Die Casting Parts Features Die casting is a method, in which liquid or semi-liquid...

Vendredi 07 avril 2023

ISO molded graphite is widely used in aerospace, solar photovoltaic and semiconductor, graphite mould casting, cemented carbide and electronic mold sintering, electric spark, glass, medicine and other industries. HOW TO MAKE MOLDED GRAPHITE BLOCK  Molded graphite blocks in petroleum...

Mardi 04 avril 2023

How to Make a Plastic Mold Prototype As one of the prototype & plastic mold makers whose goal is becoming an expert in the prototype mold making industry, HanKing Mould has experience in handling many different types of mould, including but not limited to prototype molds. Prototype...

Samedi 01 avril 2023

Prix : USD0.1-15

We are an unparalleled name in offering a wide gamut of wire cutting parts. These spare parts are amongst the most desirable and reliable products in the industry. The offered spare parts are manufactured using the best grade raw material under the supervision of highly skilled professionals...

Samedi 01 avril 2023

What is the family mold? A mold that can only produce one product at a time is called a single-cavity injection mold. If a mould is used to produce two or more plastic parts at a time, multi-cavity injection, if the parts are different, such a mold is called family mold. The plastic...

Samedi 01 avril 2023

Prix : USD0.1-15

A mould trial is a process by which a new mould is optimised in order to produce the desired products as efficiently as possible. This makes it one of the most important aspects of injection moulding. DETAIL OF TRIAL MOLDING Trial Molding Process Set barrel temperature according to...

Samedi 01 avril 2023

How to Make a Plastic Mold Prototype As one of the prototype & plastic mold makers whose goal is becoming an expert in the prototype mold making industry, HanKing Mould has experience in handling many different types of mould, including but not limited to prototype molds. Prototype...

Samedi 01 avril 2023

HanKing Mould serves global Automotive & Vehicle products customers, more than 10 years of experience enabling the HanKing team to provide customers the fast development time and stable quality to ensure the new project running well. HanKing engineer will analysis the filling...

Samedi 01 avril 2023

How to build a plastic precision mould? We have been manufacturing plastic precision moulds and components for more than ten years. With our expertise and experience, we provide valuable mold opening suggestions to our customers according to their specific needs, thus helping customers...

Samedi 01 avril 2023

Medical Equipment Mold HanKing Mould is an ISO9001: 2015 certificated experienced factory focusing on developing, design and manufacturing plastic injection moulds and plastic molded parts for medical devices. Medical Device Mold HanKing Mould has More than 10 years of experience...

Samedi 01 avril 2023

Prix : USD0.1-15

A thread is a continuous helical ridge formed on the inside (nut) or outside (screw) of a cylinder. This ridge is called the crest. Between each crest is a space, called the root. Threads are set at an angle to the axis of the bolt or nut. DESCRIPTION OF THREADED PARTS What Is Thread's Function...

Samedi 01 avril 2023

Prix : USD0.1-15

We provide DIN(Deutsche Industrie Normen) mold standard parts of high quality to our customers. The mold parts are applied to all kinds of mould base parts and mold holders. As a professional precision molding company, we will provide good services to satisfy different requirements...

Samedi 01 avril 2023

Prix : USD0.1-15

Stamping — also called pressing — involves placing flat sheet metal, in either coil or blank form, into a stamping press. In the press, a tool and die surface form the metal into the desired shape. Punching, blanking, bending, coining, embossing, and flanging are all stamping techniques...

Samedi 01 avril 2023

Prix : USD0.1-15

When it comes to plastic injection molding, precise moulds and precision equipment are required for precision molding or PIM. Among the topics covered in this blog are general ideas, specific traits and qualities, as well as specific options for plastic materials, precision moulds...

Samedi 01 avril 2023

Prix : USD0.1-15

Our precision plastic injection moulding process produces custom - rapid prototypes and end-use production parts in 15 days or less. We use aluminium moulds that offer cost-efficient tooling and accelerated manufacturing cycles, and stock more than 100 different thermoplastic resins...

Jeudi 30 mars 2023

Making a precast concrete formwork magnet includes a lot of fastening work: fastening formwork on mold table, fixing wire boxes at designated spots etc. The traditional practice would be drilling holes and then inserting pins for fastening. To be more exact: drilling holes both on...

Mercredi 29 mars 2023

Quantité : 1200sets/y - Prix : USD10000-200000

ZNC Die Sinking EDM Machine ZNC EDM Sinker has X and Y-axis manual control, and Z-axis automatic control. It can do one single job after manually set position, and job setting is also manual. Ideal for molds and spare parts manufacturing industries, ZNC die sinking EDM machine for...