PAINT&COATINGS - 8679 Annonces

Samedi 04 février 2023

Prix : 650USD-3500USD

CF Series is a plug-and-play, fully auto-dry low-humidity cabinet that will be stable at <1% RH. There is no need to set the panel buttons at all. Our ultra-low humidity </span>dry cabinets series is specially designed for MSD (moisture-sensitive materials) to comply with...

Samedi 04 février 2023

Prix : 650USD-3500USD

Dryzone Nitrogen Cabinet has a fast recovery time which is important for some industry demand, especially the Semicon industry. Our N2 cabinets use the humidity value to control the N2 filling, and they are equipped with QDN(Nitrogen Saving Module) which could save 40-60%RH N2 compared...

Vendredi 03 février 2023

Meank provides powerful rare earth big neodymium magnets for sale at good wholesale prices. Our rare earth giant neodymium magnets for sale have higher energy products and are known as powerful NdFeB magnet. As the third generation rare earth magnet, neodymium magnet, also known as NdFeB magnet...

Vendredi 03 février 2023

The sintered NdFeB magnets that have the same size on length, width, and height are called strong neodymium(NdFeB) cube magnets, which can be understood as special neodymium block magnets. Surface Treatment of Strong Cube Neodymium Magnets Neodymium(NdFeB) cube magnets have super...

Vendredi 03 février 2023

The thin&long neodymium rectangle magnets are give another name of strong neodymium(NdFeB) bar or strip magnets, The same as normal block(rectangular) neodymium magnet, neodymium bar and neodymium strip magnets also expressed by length(L) x width(W) x thickness(T). Surface Treatment...

Vendredi 03 février 2023

Silicone fabric factory Aokai's silicone fabric is made of high temperature resistant and high-strength silicone glass cloth as the substrate and coated with various colors of silicone rubber. This silicone coated fiberglass cloth is a high-performance and multi-purpose composite material...

Vendredi 03 février 2023

Reinforced with fiberglass, non stick silicone mat is durable and in thickness of 0.70mm which makes it strong enough to be reused for hundreds of times. Silicone coating also provides flexible and anti-slip surface, it is very hard to crinkle and move when you roll out the dough...

Vendredi 03 février 2023

Reinforced with fiberglass, non stick silicone mat is durable and in thickness of 0.70mm which makes it strong enough to be reused for hundreds of times. Silicone coating also provides flexible and anti-slip surface, it is very hard to crinkle and move when you roll out the dough...

Vendredi 03 février 2023

Prix : USD0.015-----USD100

Product Category: neodymium block magnets/neodymium rectangular magnets/ neodymium magnets blocks Product Name: epoxy coated block magnets Available Grade: N35-N52, 33M-50M, 35H-48H,35SH-45SH,28UH-40UH,28EH-38EH,28 AH-33AH Surface Treatment: NiCuNi, Zn, NiCu+Sn, NiCu+Ag, NiCu+Au,NiCu+Epoxy...

Vendredi 03 février 2023

Prix : USD0.015-----USD100

Product Category: mono pole magnets / single pole magnets Product Features: strong magnets, flat round magnets, only one side has magnetism Available Grade: N35-N54, 33M-50M, 35H-48H,35SH-45SH,28UH-40UH,28EH-38EH,28 AH-33AH Surface Treatment: NiCuNi, Zn, NiCu+Sn, NiCu+Ag, NiCu+Au,NiCu+Epoxy...

Jeudi 02 février 2023

LED commercial linear lighting (1) Embedded light bar can not be installed directly on combustible objects Some families use three plywood lined with paint behind the ceiling lamp for aesthetic purposes, which is actually very dangerous and must be insulated; if the high-temperature...

Jeudi 02 février 2023

Prix : 1-10usd/sqm

Double side polyester tape is made by coating silicone pressure-sensitive adhesive on both sides of the green PET substrate, and then compounding it with easy-to-peel release liner. The total thickness (100um±5um), can withstand repeated changes of low and high temperature (-30℃-230℃)...

Mardi 31 janvier 2023

Adapter is one of the most important part of G.E.T system, especially the cast lip system. Either made by casting or forging, an adaptor installed between the lip and the tooth. It's nose and pocket support the main structure. WALKSON mainly focus on providing big size cast adaptor...

Mardi 31 janvier 2023

Ultrasonic spray drying nozzle is based on ultrasonic atomization technology Ultrason ic drying nozzle for uniform and small atomized droplets Ultrasonic spray dryer nozzle is capable of connecting to various spray dryers Both carrier gas and cooling gas channels included Built-in...

Mardi 31 janvier 2023

WideMist Ultrasonic Nozzle Ultrasonic spray nozzle with spray width:40-150mm Ultrasonic sprayer with applicable droplets size: 15-60 μm High uniform atomization and the coating uniformity is more than 95% The maximum flow rate of ultrasonic nozzle can be more than 80ml/min Non-clogging...

Mardi 31 janvier 2023

Coating uniformity: > 95% Non-clogging ultrasonic nozzle technology reduces maintenance cost and down-time Continuous liquid delivery in 24 hours Utilization rate of raw materials is more than 85% XYZ three-axis servo motion system and motion controller to optimize spray patterns...

Mardi 31 janvier 2023

Tabletop coating system for drug eluted balloon and peripheral stent Precisely control of deposition by ultrasonic nozzle technology Patented holder system for multiple balloons spray coating The drug coating is free of adhesion, pinholes and other defects Excellent uniformity, stability...

Lundi 30 janvier 2023

Kinglos Art Ukulele Kinglos visual artistic ukulele print the color directly onto the top wooden board by 32 digits high precise printing technology, such design has very rich and lively color, while the thickness paint is very thin , what's the more commendable, it can obviously...

Lundi 30 janvier 2023

Surface treatment: in the photo we not show the surface treatment but we could offer the powder coating and anodizing and silk print and color plating and laser logo and so on. Process： stamping Material： Powder coating,Painting,hot dip galvanized(Mild Steel)Brush finish,powder coating...

Lundi 30 janvier 2023

Material: Stainless steel galvanized steel electrolytic plate Thickness : 1.5mm/ 1.8mm/ 2.0mm/ 2.5mm/ 3.0mm/ 4.0 mm/ 5.0mm/ 6.0mm Processing: blanking - deburring - flanging and tapping m3- bending - black sand grain powder(This surface treatment is scratch-resistant, wear-resistant...)

Lundi 30 janvier 2023

Material: SECC (Electrolytic plate) 2.0mm Surface treatment: powder plating + silk-screen printing (we also offer logo or words printing) Optional effect: flat light, sprinkle, light, orange, sand Custom PCB electronic component box This product is also a 3D drawing provided by the customer...

Lundi 30 janvier 2023

Materials: Carbon steel, Mild steel,Cold roll steel,Hot roll steel,Zinc plate,Stainless steel, Aluminum, SECC, SGCC, SPCC, SPHC, Other metal Process: laser cutting- bending –powder costing – silk printing and so on. Surface treatment: Zinc plating, Electroplating ,Nickel plating...

Lundi 30 janvier 2023

Material: low carbon steel, (there are other materials we also offer such as stell, sus, iron, and so on.) Production process: blanking bending pressure riveting welding grinding electroplating powder spraying screen printing Surface treatment: Powder coating black color.（if you like...

Lundi 30 janvier 2023

Material: sus/aluminum/iron Surface treatment: powder coating Process: stamping Precision metal stamping makes for the inside parts of the electronic enclosure Application: for electronic parts Tolerance: 0.1mm Packaging Details 1. Custom plywood crate or box for heavy sheet metal parts...

Lundi 30 janvier 2023

Cutting seam: the slit of the laser cutting aluminum plate is generally 0.1mm-0.2mm Cutting surface: the cutting surface of the laser-cut aluminum plate has no burrs and no dross. Small thermal deformation: laser processing laser slits are fine, fast, energy concentrated, so the heat...

Lundi 30 janvier 2023

Material: Carbon Steel/Stainless Steel/aluminum Surface treatment: Paint, powder coat, polish, silk-screen printing, anodize, electronic plate, sandblast, translucent surface, brush, rubber oil, ect. Process: Laser cutting,CNC bending,Welding,Surface Treament and assembly Payment term...

Lundi 30 janvier 2023

Quantité : 1000Kgs - Prix : USD1~2000/Kg

SiSiB® PC4810 Triisopropylsilyl Acrylate SiSiB® PC4810 is a colorless clear liquid. Technical Data CAS No. 157859 20 6 EINECS No. 457-670-6 Formula C12H24O2Si Molecular Weight 2128.41 Boiling Point 102°C [10mmHg] Color and Appearance Colorless clear liquid Density 25/25°C 0...

Lundi 30 janvier 2023

Quantité : 1000Kgs - Prix : USD1~2000/Kg

SiSiB® PC4600 is an organic functional coupling agent, newly developed as an adhesion promoter and reinforcing agents. Its acryloxy group is significantly more reactive than the corresponding methacryloxy group. SiSiB® PC4600 acyl silane is equal to Dow's AY43-310M, ShinEtsu's KBM-5103...

Lundi 30 janvier 2023

Quantité : 1000Kgs - Prix : USD1~2000/Kg

SiSiB® PC4300 is a methacryl-functional silane; it is a clear, light and heat sensitive liquid with a faintly sweet odour. It is equal to Dow's Z-6033, ShinEtsu's KBM-502. SiSiB® PC4300 is used as adhesion promoter at organic/inorgainc interfaces, as surface modifier (e.g. imparting...)

Lundi 30 janvier 2023

Quantité : 1000Kgs - Prix : USD1~2000/Kg

SiSiB® PC4200 is a methacryl-functional silane; it is a clear, light and heat sensitive liquid with a faintly sweet odour. It is the equivalent of Momentive's Y-11878, Dow's Z-6036, Wacker's GF32, ShinEtsu's KBE-503. SiSiB® PC4200 acyl silane is used as adhesion promoter at organic/inorgainc...