EQUIPMENT&ELECTRICAL - 25223 Annonces

Mercredi 22 avril 2015

Product Information - - - - - DuoVac High Vacuum Pump and Blower Packages - 265 to 12,000 CFM - - Dependable High Performance Design - DuoVac High Vacuum Pump/Blower Packages are designed for high uptime in demanding applications. Our direct drive air-cooled blower eliminates...

Mercredi 22 avril 2015

Product Information Centralized vacuum equipment CPA 3x151/1000V VACUUMSYSTEM CPA 3x151/1000V Serbatoio disposto verticalmente Information about: CPA TRIPLEX CPA triple pump vacuum systems are primarily used as vacuum systems for hospital applications. These groups have been...

Mercredi 22 avril 2015

Product Information CPA 3X106/1000V VACUUM SYSTEM CPA 3X106/1000 Centralized vacuum equipment Serbatoio disposto verticalmente Information about: CPA TRIPLEX CPA triple pump vacuum systems are primarily used as vacuum systems for hospital applications. These groups have been...

Mercredi 22 avril 2015

Product Information Centralized vacuum equipment CPA 2X205/1000V VACUUM SYSTEM CPA 2X205/1000V CPA 2x205/1000V - CPA 2x305/1000V: Serbatoio disposto verticalmente Information about: CPA DUPLEX CPA vacuum systems with dual pump are mainly used in centralized vacuum systems as units...

Mercredi 22 avril 2015

Product Information Vacuum Pump Systems Sometimes you need more than just a standalone pump. BPA's experienced engineers design and manufacture bespoke systems from small one-off pump sets through to large turn-key centralised systems. Working in close cooperation with the customer...

Mercredi 22 avril 2015

Quantité : 1pcs sampl - Prix : 0.01-0.5USD

Custom molded parts,AS568 standard o ring, other sizes upon clients' requirement Material: Natural rubber,silicone, nbr,epdm,cr,fkm and so on Color: black,milky white or as request Hardness: 30-90A Special features: high temperature resistance, good cold flexibility, good resistance...

Mercredi 22 avril 2015

ZJ Series Roots Vacuum Pump is a positive displacement pump, also known as mechanical booster pump, which is one of the main equipment to obtain the middle and high vacuum degree. Its working principle is similar to roots blower, which use two figure 8 rotor synchronous rotation...

Mercredi 22 avril 2015

2XZ series direct-driven rotary vane vacuum pump is one of the main vacuum equipment pumping gas from the sealed container. It not only can be used alone, but also can be a backing pump of booster pump, diffusion pump, turbo molecular pump and titanium pump. It can be used for electric...

Mercredi 22 avril 2015

Product description: 1 Using turbo molecular pump system, the ultimate vacuum 6 x 10-4 pa or less, when separately evacuated arc melting chamber separately or electromagnetic levitation melting chamber,the ultimate vacuum 2 x 10-4 pa or less. 2 The arc melting chamber complete...

Mercredi 22 avril 2015

Product description: The equipment is widely used in aerospace, aviation, electronics and other industries components dealing. Using double water-cooled, electric lift, bell vertical stainless steel structure,three heating districts adopt Y -connection,type Y connection of three heating...

Mercredi 22 avril 2015

Application: this equipment is mainly composed of a vacuum chamber system, vacuum suction and measurement system, heating and temperature control system, electric control system, pneumatic system and auxiliary system, etc. The equipment is used for device vacuum degassing, annealing...

Mercredi 22 avril 2015

Main technical data of Vacuum thermal resistance furnace Model Effective working dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate (pa/h) Heating power (KW) Working pressure (T) Temperature uniformity (℃) RVY-113 100×100×300 2000 5×10-3 0...

Mercredi 22 avril 2015

Main technical data of Induction vacuum hot-pressing furnace Model Effective Working dimension (mm) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW0 IF frequency (HZ) Working Pressure (T) Dimension (m) RVIY-60 200×250 ...)

Mercredi 22 avril 2015

Main technical data of Vacuum dehydroxy furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Temperature Uniformity(℃) Vertical RVSJ-50×70 Φ500×700 1300 2×10-3 0.5 ±5 Vertical RVSJ-11×11 Φ1100×1100 1300 2×10-3 0...

Mercredi 22 avril 2015

Main technical data of Vacuum vapor deposition furnace Model Effective working dimension mm(Φ×H) Max temperature ( ℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIC-100 350×700 1800 7×10-1 0...

Mercredi 22 avril 2015

Main technical data of Vacuum induction high-temperature graphite furnace Model Effective working dimension mm(Φ×H) Max temperature(℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIG-100 200×300...

Mercredi 22 avril 2015

Vacuum single crystal/directional solidification furnace is modern equipment.Under vacuum conditions, it uses medium frequency induction heating to melt the metal or alloy, by a specially designed holding furnace and cooling system making a thermal gradient.Then produce directional...

Mercredi 22 avril 2015

Main technical data of Vacuum bottom loading induction furnace Model Effective working Dimension mm(Φ×H) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity(℃) RVIS-160B 500×800 2550 7×10-2 0.67 160...

Mercredi 22 avril 2015

Main technical data of Vacuum pyrolysis furnace Model Effective working dimension mm(Φ×H) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIP-80 600×800 1000 5 1.5 160...

Mercredi 22 avril 2015

Main technical data of low temperature vacuum soldering furnace Model Effective working dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate (pa/h) Temperature uniformity (℃) RVSL-459 450×450×900 850 8.0×10-4 0.5 ±3 RVSL-669 ...

Mercredi 22 avril 2015

Main technical data of Aluminum vacuum brazing furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Temperature Uniformity(℃) RVSL-459 450×450×900 850 8.0×10-4 0.5 ±3 RVSL-669 600×600×900 850 8.0×10-4 0.5 ±3...

Mercredi 22 avril 2015

It is applied for vacuum quenching of high alloy steel such as high-speed tool steel,mould steel,gauge steel and cutlery steel.The machine can achieve in isothermal quenching & multi-grade quenching.With the function of convective heating,it can also be used as annealing and...

Mercredi 22 avril 2015

Product description: It is mainly used in the melting, rapid quenching or thrown belting process of Rare earth permanent magnetsNdFeB , hydrogen storage alloy, nickel base material, high temperature alloy etc.materials under the condition of vacuum or inert gas filling. Main configuration...

Mercredi 22 avril 2015

Product description: It is mainly used in the melting, rapid quenching or thrown belting process of Rare earth permanent magnets NdFeB , hydrogen storage alloy, nickel base material, high temperature alloy etc.materials under the condition of vacuum or inert gas filling. Main configuration...

Mercredi 22 avril 2015

Main technical data of Vacuum annealing furnace Models Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate (pa/h) Temperature uniformity (℃) Loading capacity (kg) RVST-448G 400×400×800 1300 2×10-3 0.5 ±5 300...

Mercredi 22 avril 2015

Product Description Use: It is used for vacuum casting of titanium and its alloys . Main technical data: Model Capacity (Kg) Working voltage (V) Maximum current (A) Ultimate vacuum (Pa) Pressure rising rate (Pa/h) Electrode Diameter (mm) Centrifugal plate diameter...

Mercredi 22 avril 2015

Main technical data of of Cycle vacuum induction melting furnace Model Capacity (Kg) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF voltage (V) IF frequency (HZ) Dimensions m( L×W×H) RVI-10 10 1850 6×10-3 0.67...

Mercredi 22 avril 2015

Application The stranded aluminum clad steel wires are suitable for the aerial transmission line as overhead ground wire of carrier. They are with low resistance and high strength. Property This kind of products also have four major advantages of excellent corrosion resistance...

Mercredi 22 avril 2015

Application The ACSR/AW conductors are also suitable for use in all practical transmission towers, and other structures. Application ranges from extra high voltage (EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises as like as ACSR...

Mercredi 22 avril 2015

Main technical data of Hydrogen vacuum sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) IF power (KW) IF voltage (V) IF Frequency (HZ) Temperature Uniformity(℃) RHIS-160 350×500 2400 10-1 0.67...