OF THERMAL - 4609 Annonces

Jeudi 28 juillet 2022

Wood-plastic composites (WPCs) are composite materials made of wood fiber/wood flour and thermoplastic(s) such as PE, PP, PVC, or PLA. The wood-plastic composite (WPC) product adopts a scientific and efficient production technology and enjoys an extensive technology extension. It...

Jeudi 28 juillet 2022

A external fire escape doors is usually installed in the emergency exits of buildings to reduce the spread of fire and smoke between separate compartments. The emergency fire exit door will remain closed or automatically close in an emergency upon the sounding of a fire alarm that...

Jeudi 28 juillet 2022

The inner thermal insulation material of the industrial double door is made of rigid polyurethane or foam. The thickness of the door is generally 50, 75, 100mm. The surrounding rubber seals are highly oil-proof, wind-proof and anti-aging. They can be assembled and replaced without special tools...

Mercredi 27 juillet 2022

Quantité : 1000 - Prix : 1 160,00 €

High-purity acid purifier: also known as acid purification system, high-purity acid purifier, acid reagent purifier, high-purity acid distillation purifier, etc. In laboratory work, due to the poor purity of acid, deviations and errors in analysis results are often caused . Commercially...

Mardi 26 juillet 2022

Prix : 100USD

Mercapto silane are functional organosilanes that typically formulated with a hydrolysable alkoxy group and a reactive mercapto group. Mercapto silanes are functional organosilanes that typically formulated with a hydrolysable alkoxy group and a reactive mercapto group. With the presence...

Mardi 26 juillet 2022

Cosmetic Tubes Wholesale Plastic empty cosmetic tubes is one of the most common cosmetic tube containers made of LDPE, HDPE, pp... etc. Products Description The structures of plastic tube are: Mono-layer, 2-layer, 3-layer and 5 layers. The diameter of plastic tubes are about: 13, 13...

Mardi 26 juillet 2022

Quantité : 30000 pcs - Prix : 4.2-10

R-PLANE (1-102) SAPPHIRE WAFERS R plane sapphire wafers are preferred for the hetero-epitaxial deposition of silicon used in microelectronic IC applications. R plane is the non-polar plane of sapphire. So the different positions of R-plane in custom sapphire optics devices, the mechanical...

Vendredi 22 juillet 2022

Quantité : 10000 Piec - Prix : 150USD-10000USD

Overview of PDC Cutter PDC cutters are made of diamond micro-powder and cemented carbide substrate sintered under ultra-high pressure and high temperature. It has high hardness, high wear resistance and thermal conductivity of diamond, and has the strength and impact toughness of...

Jeudi 21 juillet 2022

Conventional Single Column Vertical Lathe Servo motor and gearbox directly drive the Ballscrew for X&Z axis feeding. It makes the machine better accuracy and fast-moving. The machine can equip a handheld unit for easy control. Full cover is optional together with a chip conveyor...

Mercredi 20 juillet 2022

Permanent magnets are widely used in our lives. Many people are curious about what are made out of permanent magnets? Most permanent magnets are used in the manufacture of various types of permanent magnet motors, the large ones are exciters, auxiliary exciters, generators in airplanes...

Mardi 19 juillet 2022

VL series vertical machining center is a small and medium-sized vertical machining center designed by Germany and made in China. It mainly aims at the milling of automobile aluminum hubs, completing drilling, complex surface machining, and other processes; This product can also be...

Mardi 19 juillet 2022

High-performance Milling Provides professional solutions for different services Our china vertical machining center mainly include vmc machining centerand VL two series, VMC series include VMC50B,VMC50C, VMC60B, VMC60C, VMC70B, VMC70C. The structure of vertical machining centers...

Mardi 19 juillet 2022

The machine tool adopts the mainstream oblique bed structure of Europe, America, and Japan, with integrated electromechanical, hydraulic, and gas design, compact structure, and strong operability. The sheet metal adopts a fully enclosed protective structure with good chip removal...

Mardi 19 juillet 2022

The horizontal turning lathe adopts "mineral casting" material and technology of Germany, which guarantees DEED CNC machine tool with better performance on accuracy maintenance and stability for a longer time. DEED CNC model HP800-WC is mainly used for turning to machine of 12-22inch...

Mardi 19 juillet 2022

HB Series is boring mills horizontal floor type：cnc horizontal borer. According to the different sizes, we have HB1116 and HB1316. We introduce German mineral casting material for our base and column. It has better shake absorption and Low thermal expansion. Worktable, sliding seat...

Vendredi 15 juillet 2022

Overview of Heavy Duty Tube Laser Cutting Machine Large tube laser cutting uses a focused high-power-density laser beam to irradiate the workpiece, so that the irradiated material quickly melts, vaporizes, ablates, or reaches the ignition point while blowing away the molten material...

Jeudi 14 juillet 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

In Otalum, extruded aluminium tubes come in three types: round tube, square tube and rectangle tube. Just like other aluminum extrusions profiles manufactured by Otalum, our aluminum extrusion tubes can also be cut to different sizes if the existing products do not meet your requirements...

Jeudi 14 juillet 2022

Quantité : 10000 sets - Prix : 10-150USD

Feejoy Temperature Sensor is a high temp pressure transducer type which belongs to the technical field of temperature monitoring devices for substation equipment. The problem, solved by the accurate high temp/temperature pressure measurement sensors, is that in the long-term operation...

Jeudi 14 juillet 2022

Quantité : 10000 sets - Prix : 10-150USD

Best Quality Temperature Transmitter Manufacturers FEEJOY supplies different types of temperature instruments that convert thermal resistance, thermocouple, resistance and millivolt signals into a standard two-wire system 4 ... 20mA and transmits the signal to the control room....

Mardi 12 juillet 2022

Quantité : 1 carat - Prix : 0.1$

- Saw Grit Diamond - Characteristics: Completely regular crystal shapes with highest purity and strength, excellent thermal stability and compact resistance. It is suitable for high power and very high impact sawing and drilling applications. Special requirements can be customized...

Mardi 12 juillet 2022

Quantité : 1 carat - Prix : 0.09$

- - - Saw Grit Diamond - Characteristics: Completely regular crystal shapes with highest purity and strength, excellent thermal stability and compact resistance. It is suitable for high power and very high impact sawing and drilling applications. Special requirements can be customized...

Mardi 12 juillet 2022

GNS-5030 shrink tunnel packaging machine adopts the design of internal circulation air duct to ensure the uniform temperature in the furnace; Stainless steel heating tube, stable heating, and long service life; The outside of the conveying roller is wrapped with high-temperature resistant...

Samedi 09 juillet 2022

Prix : 100USD

MstnLand is a reliable globe valve china supplier. We provide high-quality industrial electric globe valves, including API globe valve, DIN globe valve, ANSI bellow seal globe valve, Angle globe valve, Y type globe valve, and Pressure seal globe valve etc. Our globe valve factory...

Samedi 09 juillet 2022

Quantité : 30000TONS - Prix : 1-20USD/KG

GRAPHITE PLATE FOR SALE With the development of modern science and technology and industry, carbon china graphite plate has become an indispensable industrial product, and its application is more and more extensive. Graphite plate is a material with electrical conductivity, high temperature...

Samedi 09 juillet 2022

Reinforced with 20% of glass fiber on substrate PA66 is called PA66 GF20, it improves dimensionally stabilized and impact resistance for injection moulding. Typical Application of PA66 GF 20 (A2000D) PA GF20 is applied to various precision gears due to its high rigidity, dimensional stability...

Samedi 09 juillet 2022

Pa6 6 gf15 is Nylon66 and 15% Glass-Filled, these materials are performed with medium stiffness and strength but it has much better mechanical properties over unfilled granules. Reinforced with 15% of glass fiber and modified Nylon 66 in Anmei plastic plant combined with other property...

Samedi 09 juillet 2022

Quantité : 30000TONS - Prix : 1-20USD/KG

In recent years, with the rapid development of die and mould industry, graphite materials, new processes and increasing die and mould factories are constantly impacting the die and mould market. Graphite for mold making has gradually become the preferred material for die and mould...

Samedi 09 juillet 2022

Transparent ABS, also called MABS plastic material, which has excellent transparency, impact toughness and good processing properties. The light transmittance of transparent ABS is about 88%, second only to PMMA (91%) and PC (90%). The main manufacturers of this MABS plastic material...

Samedi 09 juillet 2022

PC-ABS is a blend of PC and ABS. If the two materials are simply mixed and then injected directly, the effect is very poor, and delamination will occur. The advantages of PC are rigidity and toughness, but the disadvantages are stress cracking and high viscosity. The advantage of...

Samedi 09 juillet 2022

Quantité : 30000TONS - Prix : 1-20USD/KG

GRAPHITE MOLDS FOR CASTING Graphite permanent mold casting refers to the mold used to form castings in graphite mould casting process. The main gravity casting molds include high-pressure casting mold (die casting mold), low-pressure casting mold, extrusion casting mold, and so on...