TEMPERATURE LIQUID SILICONE RUBBER FOR - 31908 Annonces

Jeudi 25 mai 2017

- HOT MELT ADHESIVE Universal hot melt adhesive. For wood, paper, cardboard, leather, skin. Available in yellow or transparent colour. Working temperature 180-200° C. - Localisation : Via S.Pertini, 36, 62012 Civitanova Marche, Personne à contacter : Aldo Fusari, 00390733898525

Jeudi 25 mai 2017

- ANTI-FOAM Silicone anti-foam used in various industrial applications to control or to eliminate foam generation thereby optimising productivity. Suitable for water based adhesive. - Localisation : Via S.Pertini, 36, 62012 Civitanova Marche, Personne à contacter : Aldo Fusari, 00390733898525

Jeudi 25 mai 2017

- Ecological Natural Rubber Based Adhesive with High Viscosity. Super Light Eco - Mastic is an ecological natural rubber based glue used for the construction of uppers in bondings. Leather will keep flexibility throught time. Apply with a brush to both sides. - Localisation : Via S...

Jeudi 25 mai 2017

POLYURETHANE ADHESIVE WITH MEDIUM-HIGH VISCOSITY Neoplastic ABR is a monocomponent polyurethane adhesive suitable for sticking leather and synthetic materials on soles. It can be reactivated at about only 50° C. It is possible to increase performances adding activator Desmodur (5%)...

Jeudi 25 mai 2017

WATER DISPERSION ADHESIVE WITH LOW VISCOSITY AND HIGH RESISTANCE TO HEAT The IDROTEX 200 is a water based polyurethan adhesive used for sticking of synthetics on soles of different materials changing only the preparation of the soles. By spraying. High Crystallization CHARACTERISTICS ...

Jeudi 25 mai 2017

WATER DISPERSION ADHESIVE WITH LOW VISCOSITY Lattice puro /R is a natural latex based adhesive. Suitable for bonding leather and other application. Its formulation give a very strong initial grip. The PURE LATEX is a water based adhesive of natural rubber's latex with REXIN used for...

Jeudi 25 mai 2017

Pure Latex Water Based Adhesive is ideal for solution appliers with rolls. The PURE LATEX is a water based adhesive of natural rubber's latex used for assembly of lining, cover with leather and various process of Juntery. CHARACTERISTICS : Viscosity 200+/-50 Cps USING INSTRUCTIONS ...

Jeudi 25 mai 2017

The ECO-AUTOMASTIK is a NATURAL RUBBER ADHESIVE used on the general processing of JUNTERY. Adapt for who wants to apply the glue only on a part. It is called ECO because the company uses only raw materials with law environmental impact. CHARACTERISTICS : Viscosity : 5500 - 6000 cPs Colour ...

Jeudi 25 mai 2017

Rubber Soles Bicomponent Adhesive The NEOPRENE ATT is a plychloroprene bicomponent adhesive with high crystallization used for RUBBER SOLES for application of NATURAL RUBBERS.High bond strenght. It is also used for general processing of the shoe. It must be used with a 5% of ACTIVATOR...

Mercredi 24 mai 2017

Quantité : 1000

S&A Air-cooled water chiller for water-cooled computing server - CW-7800 is high-precision compression refrigeration water chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system. Air-cooled water chiller CW-7800 is able to cool...

Mercredi 24 mai 2017

Quantité : 1000

S&A dual pump chiller to cool laser head and dc power S&A CW-6100AT dual temperature and dual pump series is high-precision compression refrigeration water chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system. - dual pump...

Mercredi 24 mai 2017

Quantité : 1000

S&A CW-5200 water chiller to cool turbomolecular pump S&A(TEYU) company from China is specialized in producing industrial water chiller which is widely used in a variety of industrial manufacturing, laser processing and medical industries. Recently, a customer use S&A...

Mercredi 24 mai 2017

Quantité : 1000

S&A chiller for water cooled electro spindles of small milling machines A customer from Russia buys S&A chiller CW-5000 to cool water cooled electro spindles of small milling machines. S&A CW-5000 compact chiller with long working life and simple operation has high precision...

Mercredi 24 mai 2017

Quantité : 1

The Thermostatic Bimetallic Steam Trap BK45 is used for low capacity applications such as drip and tracing, and economically combines steam trap, check valve and Y-Strainer (with optional blow off valve) in a small profile with a convenient 2-bolt cover for easy maintenance. Features...

Mercredi 24 mai 2017

Quantité : 1

Product: Bimetallic steam trap Pressure Rating: 1.6- 4.0Mpa Specification: Screwed: DN15-50, Flanged: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS; Standard screwed: NPT BSP Performance / Advantages: Adopt imported material as its hot sensitive element, and so it...

Mercredi 24 mai 2017

Quantité : 1

Product: Capsule- type Steam Trap Pressure Rating: 1.6- 4.0Mpa Specification: Screwed: DN15-50, Flanged: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS; Standard screwed: NPT BSP Standard screwed: NPT GOOLE Thermostatic Steam Traps are available with balanced-pressure...

Mercredi 24 mai 2017

Quantité : 1

1.Usage. It can be used for pipelines in high pressure and temperature,the medium can be saturated steam and superheated steam. 2.Feature. a.This type steam trap has automatice blow-off mechanism,the disc is new type,just like a crown,and its seal performance is reliable,It is also...

Mercredi 24 mai 2017

Quantité : 1

Usage. It can be used for pipelines in high pressure and temperature,the medium can be saturated steam and superheated steam. Feature. 1.The steam thermal insulation is not affacted with pressure changing,which prevents air play phenomenon happening. 2.The unlocking device with bimetal...

Mercredi 24 mai 2017

Quantité : 1

Pressure Rating: 1.6- 4.0Mpa Specification: Screwed: DN15-50Material: cast steel Standard flanges: DIN, ANSI, JIS, JB79 Standard screwed: NPT Working Principle. The design makes use of the working principle of difference in density of steam and condensate. The compound lever is connected...

Mercredi 24 mai 2017

Quantité : 1

Performance / Advantages: Continues discharging saturation condensed water without accumulation, and so get the maximu m thermal efficiency. When steam pressure changes, the ball float can adjust the opening of valve seat without inf luence, and so it is stable. With automatic and...

Mercredi 24 mai 2017

Quantité : 1

GATD42 thermodynamic steam trap. Pressure Rating: 1.6- 6.4Mpa. Specification: DN15-50. Material: cast steel. Standard screwed: NPT. Structural Characteristics. 1.Assembled with steam or air heat preservation mechanism and unaffected by the environmenta l humidity;with operation frequency...

Mercredi 24 mai 2017

Quantité : 1

Product: GAFT43 ball floatsteam trap. Pressure Rating: 1.6- 4.0Mpa. Specification: DN25. Material: cast steel. Standard flanges: DIN, ANSI, JIS, JB79. Structural Characteristics. 1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve seat with reliable...

Mercredi 24 mai 2017

Quantité : 1

GAFT44 ball float steam trap. Pressure Rating: 1.6- 4.0Mpa. Specification: DN32 DN40 DN50. Material: cast steel. Standard flanges: DIN, ANSI, JIS, JB79. Structural Characteristics. 1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve seat with reliable...

Mercredi 24 mai 2017

Quantité : 1

Product: FT14 ball float steam trap. Pressure Rating: 1.6~2.5Mpa. Specification: DN15~25. Material: cast steel. Standard flanges: DIN,ANSI,JIS,JB79. Structure characteristic. 1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve se at with reliable...

Mercredi 24 mai 2017

Quantité : 1

Structural Characteristic&Purpose. This series reducing valve is pilot piston type reducing valve, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat...

Mercredi 24 mai 2017

Quantité : 1

Direct Acting Bellows Pressure Reducing Valve Structural characteristic and purpose.< /span> Pressure Rating: 1.6- 2.5Mpa Specification: DN15-25 Material: CF8 Standard screwed: NPT BSP Goole Y14H/F Direct Acting Bellows Pressure Reducing Valve< span data-mce-style="color: #222222...

Mercredi 24 mai 2017

Quantité : 1

Product: GAY42X Direct acting piston type pressure reducing valve. Pressure Rating: 1.0- 6.4Mpa Specification: DN20-400 Material: Steel, CF8 Standard flanges: DIN, ANSI, JIS; Structural Characteristic&Purpose. This series pressure reducing valve is a new type regulating valve...

Mercredi 24 mai 2017

Quantité : 1

Y43H Pilot piston type steam pressure reducing valve. Structural characteristic and purpose This series reducing valve is pilot piston type reducing valve for steam, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinde r sleeve...

Mercredi 24 mai 2017

Quantité : 1

DP27 pilot operated pressure reducing valve. Pressure Rating: 1.6- 2.5Mpa Specification: DN15-150 Material: Steel WCB Standard flanges: DIN, ANSI, JIS DP27 Pilot operated pressure reducing valve is the new type pilot extra-huge membrane pressure reducing valve developed by our company...

Mercredi 24 mai 2017

Quantité : 1

232@21barg Minimum Operating Temperature(TMIO) 0 Maximum Differential Pressure(PMX) 17bar Maxiumu Cold Hydraulic Test Pressure 38barg Material Of Main Component. Name Of Component Material of component Valve Body,Valve Cover WCB Valve Seat 2Cr13 Valve Clap 2Cr13 Valve...