SHELF - 2529 Annonces

Mardi 15 mars 2016

Quantité : 200kg - Prix : 8.85usd/kg

Description of translucent silicone rubber for shoe insole translucent silicone rubber for shoe insole is a solvent-free, flowable - 2 Component RTV Silicone rubber. After mixing the X810 A and X810 B at a mix ratio of 1: 1 the material will cure by an addition reaction at room temperature...

Samedi 12 mars 2016

mold liquid silicone rubber Application: - Unsaturated polyester resins, epoxy resins, polyurethane resins. - Polyurethane elastomers. - Natural and synthetic waxes. - Plasters and cements. - Low-melting point - Imitation wood ... ..to be continued Liquid silicone rubber Mainly features...

Vendredi 11 mars 2016

Prix : 0.01-1USD

Machining Processes: Milling, Turning, Drilling, Boring, Tapping, Turning: Contour Turning, Form Turning, Taper Turning Straight Turning Threading, External Turning Threading Internal Turning Threading, Thread milling Knurling, Spline (Wire EDM), Parting/Cutting Facing, Internal Forming...

Vendredi 11 mars 2016

Prix : 0.01-1USD

General Capabilities of metal stamping: Prototype of Stampings Production of Metal Stamping High Speed Metal Stamping Precision Metal Stamping Progressive Die Stamping High Quality, complex, tight tolerance Stamping Low volume prototypes to high volume progressive dies Taking...

Vendredi 11 mars 2016

Prix : 0.01-1USD

General Capabilities: Prototype of Stampings Production of Metal Stamping High Speed Metal Stamping Precision Metal Stamping Progressive Die Stamping High Quality, complex, tight tolerance Stamping Low volume prototypes to high volume progressive dies Taking over existing...

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Mardi 08 mars 2016

Quantité : 100 pcs - Prix : 4-6 usd per piece

Aluminium Bar Console Patte de meuble Les caractéristiques: 1. Couleur: belle finition polie, pas de lignes visibles, une sensation de douceur et de bonne 2. Parfait trou de forage 3. La connexion transparente entre la barre et la plaque 4. 90 degrés plaque de degré de forme...

Lundi 07 mars 2016

Quantité : 60T/MONTH - Prix : 9.8 USD/KG FOB HUANG

pad printing silicone is well applied for printing pads making of perfect irregular patterns on plastics toys, electronic toys trademarks, keyboards, electroplating products ect. Appearance: Part A: an non-toxic and odorless liquid in white/yellow/red color Part B: an non-toxic...

Lundi 07 mars 2016

Quantité : 60T/MONTH - Prix : 9.2 USD/KG FOB HUANG

1.description Insoles silicone is great to make silicone insoles and relative foot health care, such as forefoot pain, heel lifts, insoles, foot orthotics, arch supports, heel cushions and pads ect. it Is a medical grade silicone that resist to bacterial growth and does not dry out...

Lundi 07 mars 2016

Quantité : 60T/MONTH - Prix : 9.4USD/KG FOB HUANGP

1.description Life casting silicone is great to make for artificial limb products such as duplicating for artificial limbs, hands, fingers, feet, other human organs, dolls, toys, body double products such as reproducing an full body from head to toe, or a torso from face to mid-section...

Dimanche 06 mars 2016

Quantité : 60t/month() - Prix : usd 6.3 FOB huangpu

1.description Platinum cure electronic potting silicone rubber is two parts with low viscosity, and it can be cure d completely at room temperature.platinum cure electronic potting silicone rubber is with stronger h eat-resistence than that of condensation type. 2.appearance Part A...

Samedi 05 mars 2016

Quantité : 1000 - Prix : 0.01-1

Production Method Used of metal stamping: Progressive Dies, Compound Dies, Mandrel Dies, Blanking Dies, Cam Dies; Piercing, Notching, Trimming, Stippling, Lancing, Louvering, Bending, Forming, Coining, Staking, Sem i-Perf, Extrusion, Extrude, Blank & Pushback; Feed dual material...

Samedi 05 mars 2016

Quantité : 1000 - Prix : 0.01-1

Product Feature of stamping parts: Press Rating: 30 to 300 tons Max Press Speed: 600 SPM Max. Press Stroke: .5 to 9.75 in Max. Press Bed Length: 95 in Max. Press Bed Width: 33 in Part Thickness: .003 to .188 in Tolerance(+/-): Less than .0005 in Material Used of stamping parts...

Jeudi 03 mars 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Jeudi 03 mars 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Jeudi 03 mars 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Dimanche 28 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Samedi 27 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Samedi 27 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Samedi 27 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Mercredi 24 février 2016

Before the curing Appearance White paste Relative density 1.60～1.70(g/cm3) Surface drying time ≤15(min) After the curing Tensile strength ≥1.5（MPa） Elongation At Break ≥150(%) Shear strength ≥2.0(MPa) Hardness 35～45(Shore A) Temperature Range -60～200(℃) Volume resistivity 2...

Mercredi 24 février 2016

Appearance White Paste 200~300(1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0(%) (200℃, 8h) Volatile ≤1.0(%)(200℃, 8h) Breakdown Voltage Strength ≥10(kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2(w/m.k) 1 kg/tank, 10kg/barrel, 80g/branch...

Mercredi 24 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Samedi 20 février 2016

Quantité : 100 MT PER - Prix : 2000 usd per mt CIF

Hemp seeds Product Name: Hemp seed extract Latin Name: Cannabis sativa L Appearance: Brown yellow powder Part used: Seed Application: Health-care products Shelf Life: 24(month) Name Hemp Seed Botanical source Cannabis sativa L. Specification 3.5mm belwo,3.5-5.0mm...

Mercredi 17 février 2016

Quantité : 2000mt / m - Prix : $12/ Carton

Product Specification: Canned Mushrooms Product Name Specification Net Wt. Drained Wt. Tins/Carton CTNS/20'FCL Mushrooms 184g x 24tins 184g 114g 24 3500 284g x 24tins 284g 156g 24 2450 400g x 24tins 400g 200g/230g 24 1800 425g x 24tins 425g 200g/230g 24 1750 800g...

Mercredi 17 février 2016

Quantité : 500MT/MONT - Prix : $3200/MT CIF

Being a quality driven organization, we are engaged in offeringhigh quality Almond Nuts. The offered products are cleaned, dried and processed with the help of latest machinery at our vendors' end. These almond nuts are widely used to add to flavor to desserts, puddings, etc. Contain...

Mercredi 17 février 2016

Quantité : 3000MT - Prix : $350/MT/CIF

Product Details: Product: Green Asparagus Color: Fresh green Standard: Grade A Size: Length: 15cm Dia: 8-10mm/10-16mm/16-22mm Length: 17cm Dia: 8-10mm/10-16mm/16-22mm Or cut according to custome's requirements Package: 1kg/bag 10kg/carton or according to custome's requirements MOQ...

Mercredi 17 février 2016

Quantité : 2000MT/MON - Prix : $2000/mt/CIF

Walnuts are a great source of antioxidants and the minerals manganese, copper, phosphorus, and magnesium. Walnuts are a good source of dietary fiber, protein, the amino acid arginine, omega-3 fatty acids and alpha-linolenic acid (ALA). it has been shown that Walnuts significantly...