TEMPERATURES - 24053 Annonces

Mercredi 16 mars 2016

Quantité : 1000000 - Prix : 75,00 €

High speed Corrugator Belt With Kevlar Edge is a consistent development bason on the high speed corr ugator belt.It is ideal for corrugating systems with high production speed,even load systems and fre quently changing paperboard widths.the belt's edge reinforcement of kevlar fibers...

Mardi 15 mars 2016

Quantité : 1 - Prix : 1,00 €

1.SAFETY Dispositif de commande d'arrêt d'urgence de la sécurité Dispositif de protection contre le blocage de sécurité Système de verrouillage de fauteuil dentaire Poste de président d'urgence -Air Eau-électricité avec un bouton système de commutation Eau-électricité...

Mardi 15 mars 2016

Quantité : 200kg - Prix : 5.15usd/kg

Mold making silicone rubber is generally named as two-part silicone rubber that vulcanizes at temperature. Part A is a flow-able liquid, part B is the catalyst. Applications of RTV-2 mold making silicone rubber for stone products: Mold making silicone rubber for stone products is...

Mardi 15 mars 2016

12v mppt solar charge controller Key Features: ■Adopt advanced MCU microprocessor control technology. ■12V/24V/48V self detect to choose output voltage. ■Advanced MPPT T echnology, High converting efficiency higher than 97% for minimizing energy loss. ■Capable to parallel in output...

Mardi 15 mars 2016

Quantité : 200kg - Prix : 8.85usd/kg

Description of translucent silicone rubber for shoe insole translucent silicone rubber for shoe insole is a solvent-free, flowable - 2 Component RTV Silicone rubber. After mixing the X810 A and X810 B at a mix ratio of 1: 1 the material will cure by an addition reaction at room temperature...

Mardi 15 mars 2016

Quantité : 200kg - Prix : 8.52usd/kg

Characteristics and Application of pad printing silicone rubber: 1. Pad printing silicone rubber is a double-component silicone rubber, and can be vulcanized in room temperature. Solidify time depends on the mount of curing agent, the more the curing agent, the faster the curing...

Mardi 15 mars 2016

http://home power inverterIG3110C 500va solar inverter Key Features: ■Optional input voltage range. ■Full automatic and silent operation. ■Rack Tower design. ■Automatic charging. ■Built-in with 10Amp or 20Amp optional charger for up to 200Ah battery. ■Auto change AC-DC. ■Over-load...

Mardi 15 mars 2016

IG3115C 1000 w pure sine wave inverter Key Features: ■Pure sine wave output ■The charging current is big up to 75 Amp ■Output power factor: s 0.9-1 ■Well accept generator's output ■Full automatical and silent operation ■Automatically transfer between batter y and line modes...

Lundi 14 mars 2016

Quantité : 1 - Prix : 1,00 €

1.SAFETY Dispositif de commande d'arrêt d'urgence de la sécurité Dispositif de protection contre le blocage de sécurité Système de verrouillage de fauteuil dentaire Poste de président d'urgence -Air Eau-électricité avec un bouton système de commutation Eau-électricité séparation...

Samedi 12 mars 2016

Quantité : 2000pcs

Product Description Adopt Microwave sensor, the LED High Bay Tube can be applied in a wider use. Up to 80% energy saving compared to HID high aby. Lower maintenace cost thanks to over 3 times longer lifetime. Product Feature Samsung SMD5630 G2, LM80 Certificated LED Source ...

Samedi 12 mars 2016

Quantité : 2000pcs

Product Description Adopt Microwave sensor, the LED High Bay Tube can be applied in a wider use. Up to 80% energy saving compared to HID high aby. Lower maintenace cost thanks to over 3 times longer lifetime. Product Feature Samsung SMD5630 G2, LM80 Certificated LED Source ...

Samedi 12 mars 2016

Quantité : 50sets/yea - Prix : Negotiatable

Instruction and Working Principle Lignite briquette machine (has agglomerant type) main equipment are motor, reducer, main machine, belt pulley, ball groove alignment device of roller shell, hydraulic system, electric control and other parts. cause of the gravity of lignite itself...

Samedi 12 mars 2016

Description of Pad Printing Silicone Rubber: 1. Pad Printing Silicone Rubber is a double-component silicone rubber, and can be vulcanized in room temperature. Solidify time depends on the mount of curing agent, the more the curing agent, the fas ter the curing. 2. Pad Printing...

Samedi 12 mars 2016

Quantité : 200kgs - Prix : 10.68usd

food grade silicone rubber for cake molding Food grade Silicone Rubber cure at room temperature with negligible shrinkage. With different hardne sses to choose from, OTT products offer tremendous versatility and are suitable for making productio n molds of any configuration, large or small...

Vendredi 11 mars 2016

There are two kinds of PTFE rods to offer. One is manufactured by Paste extruding method in the diameter from 4 to 9mm and the other Is made by ram extruding method is the diameter from 10to 50mm; rods Over the diameter 50mm are manufactured by moulding. PTFE is the most chemical-resistant...

Vendredi 11 mars 2016

Prix : FOB USD 80/square me

Neddle Corrugator Belt is produced by professional needle machine with advanced technology.According the requirement of corrugator paper board production line,the needle corrugator belt is made of high PET fiber. Specifications: material: 100%PET manufacturing process: needle width...

Jeudi 10 mars 2016

Introduction: JL-X waterproof test system is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5: 2000. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test...

Jeudi 10 mars 2016

Introduction: ZRS-3H The Glow-wire Tester adopts high temperature coating spraying on steel structure, Glow wire tester is to test glow wire of lighting lamps, electronic products and household appliances, and UL 746A, IEC829, DIN695, VDE0471, the Glow wire tester ZRS-3H is suitable...

Jeudi 10 mars 2016

Introduction: It is according to IEC60068-2-1(GB/T2423.1) and IEC60068-2-2(GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08, electricity products, electronic components, material and so on. Specification: •The chamber is produced by SUS304 Steel, the temperature...

Jeudi 10 mars 2016

Introduction: LPCE-3(LMS-7000VIS) is CCD Spectroradiometer & Integrating Sphere Test System, it is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps...)

Jeudi 10 mars 2016

Introduction: LPCE-2(LMS-9000) is high precision CCD Spectroradiometer & Integrating Sphere Test System, it is suitable for photometric and colorimetric measurement of luminaries such as Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps and high voltage...)

Jeudi 10 mars 2016

Introduction: LSG-1800B/LSG-1700B/LSG-1600B Rotation Luminaire Goniophotometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1800B is an update version for LSG-1800, the...

Jeudi 10 mars 2016

Introduction: LSG-3000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 requirement. The LSG-3000 is an automatic light distribution intensity 3D curve testing system for measuring light. The measuring distance is from 5m to 30m. It can measure all types of lighting sources...

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Mercredi 09 mars 2016

80mm thermal printer wifi and bluettoth support RPP300 mobile receipt printer Features: mobile receipt printer 1. Paper sensor: LED indicator flashes when come to paper end meanwhile alarm; 2. Printing Command: ESC/POS compatible with commands set; 3. Power: 2000mAh rechargeable...

Mercredi 09 mars 2016

Factory direct sale cheap price wireless mobile printer RPP02N bluetooth thermal printer Features: bluetooth thermal printer 1. Paper sensor: LED indicator flashes when come to paper end meanwhile alarm; 2. Printing Command: ESC/POS compatible with commands set; 3. Power: 1500mAh...

Mercredi 09 mars 2016

4 inch printing width 150mm/s barcode labeling RP400 thermal transfer printer thermal transfer printer Exquisite appearance High speed, good stability, durable performance Transmission-typed paper detection with excellent accuracy and high speed. Multi-functional interfaces with parallel...

Mercredi 09 mars 2016

Quantité : 1 - Prix : USD80/UNIT

Rongta thermal dot line printing RP820 compatible with ESC/OPOS command 80mm wifi pos receipt printer Feature of pos receipt printer Elegant and functional design Black/luxury gold color optional. Color light order alarm(optional), Beeper order alarm, paper end & paper near...