INJECTION - 4400 Annonces

Mardi 02 août 2022

Prototype molds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering...

Mardi 02 août 2022

Precision mold components is a process that requires high technique and the use of precision molds and precision machines. The process of precision mould is different from normal injection mold but it still belongs to injection mold. It requires strict tolerance of ±0.01 mm and it...

Mardi 02 août 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Mardi 02 août 2022

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts. Multi...

Mardi 02 août 2022

With more than 20 years of experience in clean room injection molding, as the medical silicone molding company in China, we specialize in various clean room injection molding process techniques including medical silicone injection molding and medical grade silicone injection molding...

Mardi 02 août 2022

Packson is not totally the same as other medical molding companies. Because we are an ISO-certified medical molding provider. Packson had got the certification of ISO 13485: 2018 and ISO 9001: 2008. We've been working with healthcare and medical companies like BD, Wondfo since 2008...

Mardi 02 août 2022

2k injection molding is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years mold...

Vendredi 29 juillet 2022

Prix : 100USD

Genvan Silicones, founded in January 2008, is committed to the research and development (R&D), production, and sales of various kinds of Heat Cure Rubber (HCR) and Liquid Silicone Rubber (LSR). Genvan silicones rubbers supplies are certified as the national high-tech enterprise...

Vendredi 29 juillet 2022

Prix : 100USD

GA-9442/GA-9443 cable silicone have good fluidity, suitable for high voltage injection molding, compression molding, or extrusion molding techniques to produce power cable accessories. GA-9440E cable rubber has good fluidity property, suitable for producing power electric cable accessories...

Vendredi 29 juillet 2022

Prix : 100USD

Low hardness series products have good softness, certain self-bonding, etc. properties; this product has not been tested and is not specifically indicated for medical or pharmaceutical use. This product is not suitable for human injection and direct contact with food. Features of...

Mercredi 27 juillet 2022

A manifold is a combination of multiple . The manifold includes gate valves, pipelines, pipe fittings, pressure gauges, and electronic sensing, hydraulic control systems and other accessories. There are many types of manifolds that have different uses depending on the construction...

Mardi 26 juillet 2022

Preform Plastic Bottle Preforms is generally referred to PET preform, which is produced by means of injection to blow different pet bottles by heating to about 80 degree centigrade, and also can add color clip to blow colored bottles. Products Description The advantage of pet preform is...

Mardi 26 juillet 2022

Cosmetic Tubes Wholesale Plastic empty cosmetic tubes is one of the most common cosmetic tube containers made of LDPE, HDPE, pp... etc. Products Description The structures of plastic tube are: Mono-layer, 2-layer, 3-layer and 5 layers. The diameter of plastic tubes are about: 13, 13...

Mercredi 20 juillet 2022

Soft Magnetic Bonded Compounds As a new material, soft magnetic compound can be used for extrusion or injection molding and are especially suitable for high-frequency high-speed stator, 5G base station, transformer skeleton applications, it is helpful for the device to be small and lightweight...

Mercredi 20 juillet 2022

High density and metal bonded plastic functional composite materials with complex and delicate structures can also be prepared by the injection molding process. Density can be adjusted as required from 2-13 g/cm3, which can replace some traditional aluminum alloy, zinc alloy, stainless steel...

Mercredi 20 juillet 2022

We can provide customers with appropriate mold design scheme (magnetic circuit design and mold-flow analysis) and optimization processing parameter based on the material characteristics to obtain the best performance of the material, we also cooperate with our customer to analyze...

Mercredi 20 juillet 2022

Permanent magnets are widely used in our lives. Many people are curious about what are made out of permanent magnets? Most permanent magnets are used in the manufacture of various types of permanent magnet motors, the large ones are exciters, auxiliary exciters, generators in airplanes...

Mercredi 20 juillet 2022

In childhood, magnets were one of our favorite toys. We always played with them and were amazed by their peculiar characteristics. Two magnets always have two sides that can attract each other, and two sides will always repel each other. We always split them up and down. In middle...

Mercredi 20 juillet 2022

Biometric Outdoor Gate Lock / Digital Keypad Door Lock / Indoor Digital Lock / Keyless Entry Touchpad Door Lock / Smart Door Lever Lock / Smart Door Lock / Smart Lever Lock E5 digital biometric lock is equipped with cycinder built-in clutch, with separate control systems in the front...

Mercredi 20 juillet 2022

The touch screen of this series touch pad front door lock is designed with ultra-thin all-tempered glass, and the fingerprint reader is located on the front handle, which can be unlocked in one second by lightly pressing the handle.  TYPES OF ELECTRONIC/DIGITAL TOUCHPAD DOOR LOCK...

Mardi 19 juillet 2022

Silicone rubber keypads (also known as elastomeric keypads) is a low cost and reliable switching solution used in a wide range of consumers and industrial electronics. Silicone keypad is made of solid silicone raw materials, hardness between 30 degrees and 70 degrees, the product...

Mardi 19 juillet 2022

Silicone products are easy to absorb dust under normal circumstances, so in the production process, a thin layer of feel oil will be sprayed on the surface of silicone products. The main effect of oil injection is to improve the feel and beauty of the silicone rubber button pad...

Mardi 19 juillet 2022

Quantité : 55KK/Y - Prix : talk in detail

Molding Glass Lens Elements In the future, molding glass lens elements application will be more popular and mainstream due to its high functional requirements and high stability requirements. As Sunny has nearly 20 years of design and processing experience, we can optimally seek a...

Dimanche 10 juillet 2022

Quantité : 1 ton - Prix : 800,00 €

We are professional manufacturer of filler masterbatch in China. Our masterbatch can be added in many mediums, such as film, bag, sheet, pipe, injection molding,etc Followings are our ranges of products - Transparent Filler Masterbatch - Barium Sulfate Filler Masterbatch - Sodium...

Samedi 09 juillet 2022

Reinforced with 20% of glass fiber on substrate PA66 is called PA66 GF20, it improves dimensionally stabilized and impact resistance for injection moulding. Typical Application of PA66 GF 20 (A2000D) PA GF20 is applied to various precision gears due to its high rigidity, dimensional stability...

Samedi 09 juillet 2022

Pa6 6 gf15 is Nylon66 and 15% Glass-Filled, these materials are performed with medium stiffness and strength but it has much better mechanical properties over unfilled granules. Reinforced with 15% of glass fiber and modified Nylon 66 in Anmei plastic plant combined with other property...

Samedi 09 juillet 2022

We are here to be your reliable partners of Color Masterbatch. Color masterbatches are widely used in polyethylene(PE), polypropylene(PP), polystyrene(PS), ABS, nylon, PC, PET and other resins to produce colorful fibers, clothing, blown films, daily plastics, cables and optical cables...

Samedi 09 juillet 2022

Transparent ABS, also called MABS plastic material, which has excellent transparency, impact toughness and good processing properties. The light transmittance of transparent ABS is about 88%, second only to PMMA (91%) and PC (90%). The main manufacturers of this MABS plastic material...

Samedi 09 juillet 2022

PC-ABS is a blend of PC and ABS. If the two materials are simply mixed and then injected directly, the effect is very poor, and delamination will occur. The advantages of PC are rigidity and toughness, but the disadvantages are stress cracking and high viscosity. The advantage of...

Samedi 09 juillet 2022

Pa6gf50 is a fiber reinforced plastic made of nylon 6 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added. Typical Application of PA6 GF50 (A1011J) PA GF50 is used to manufacture high-strength and high wear-resistant structural...