TOLERANCE - 2831 Annonces

Samedi 13 mars 2021

This powerful neodymium disc magnet measures 3/8" in diameter, 1/8" in thickness, with the pull force of 5.46 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Samedi 13 mars 2021

Industrial Magnet 1 inch x1/4 inch x1/8 inch Magnetic Plate Thin Magnets Bar This powerful neodymium block magnet measures 1" in length, 1/4" in width, and 1/2" in thickness, with the pull force of 18.71 lb vertically. It is made from an alloy of neodymium, iron and boron, plated...

Samedi 13 mars 2021

Custom Round Car Magnets 3/4 inch x 3/4 inch N52 Super Strong Magnet For Sale This powerful neodymium disc magnet measures 3/4" in diameter, 3/4" in thickness, with the pull force of 37.86 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers...

Samedi 13 mars 2021

This powerful neodymium block magnet measures 1" in length, 1/2" in width, and 1/4" in thickness, with the pull force of 20.37 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Samedi 13 mars 2021

This powerful neodymium block magnets measures 2/3" in length, 1/2"in width, and 1/4" in thickness, with the pull force of 15.95 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Samedi 13 mars 2021

This powerful neodymium block magnet measures 3/4" in length, 1/4" in width, and 1/4" in thickness, with the pull force of 10.51 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Samedi 13 mars 2021

Strong Round Magnet N42 3/8 inch x1/2 inch Disc Magnet Flat Magnets This powerful neodymium disc magnet measures 3/8" in diameter, 1/2" in thickness, with the pull force of 8.5lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel...

Samedi 13 mars 2021

This powerful neodymium disc magnet measures 3/8" in diameter, 1/2" in thickness, with the pull force of 10.52 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Samedi 13 mars 2021

Circle Magnet N52 Magnet 1/2 inch x1/16 inch Round Magnets For Sale This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.84lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel...

Samedi 13 mars 2021

Round Magnet N42 1/2 inch x1/16 inch Industrial Magnets For Sale This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.1lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel...

Mardi 09 mars 2021

Sheet Metal Welding is a preferential joining techniques to meet your quality and tolerance requirements, enables you to bring the parts cut from different sheet metal together into fabrication. Welding is performed in accordance with the highest standards, the strength of welds is...

Mardi 09 mars 2021

Premium provide low cost and high speed sheet metal stamping processing which is a manufacturing process that can produce a high volume parts and components. Stamping are suitable for both short or long production runs, and be conducted with other sheet metal forming process, such as bending...

Mardi 09 mars 2021

Our CNC turning service produces most cylindrical and conical shaped parts on the CNC lathes. CNC Turning is a machining process in which material bar is held by a chuck and rotated while a cutting tool is fed to the piece to remove material to create the expected shapes, our live...

Mardi 09 mars 2021

CNC prototyping is the fastest way that allows designers to rapidly verify designs and iterate ideas without tooling costs, CNC machining services are ideal to make rapid prototyping from plastic or metal, they are able to achieve tighter tolerance with better surface finishes compared...

Vendredi 05 mars 2021

Hot rolling refers to the process in which the steel is rolled above the recrystallization temperature. After cooling at room temperature, the steel is normalized and cooled to become a hot rolled finished steel product. If the application is not strict on diameter tolerance and surface finish...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Galvanized Rolled Steel Hot dipped china galvanized steel sheet is a carbon steel sheet coated with zinc on both sides through a continuous hot-dip process. When the heated steel strip is in contact with the molten zinc, the coating is firmly adhered to the steel by...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Steel Strip Strip steel has more stringent thickness tolerances than cold-rolled steel. Before rolling, cold rolled steel strip is pickled to remove surface impurities and ensure a clean, even finish. The strip does not shrink or creep at ambient temperature...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Sheet The cold rolled sheet is manufactured from the hot rolled sheet. The hot rolled sheet is cleaned chemically and processed further in cold reduction mills, where the material is cooled (at room temperature) followed by annealing and/or tempers rolling...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Coil Cold rolled coil, as known as CRS or CRC. Cold rolled steel coils are a farther product that uses hot rolled steel coils to do further processing. The further processed steel coil put in a cold rolling mill where the material is cooled (at room temperature)...

Mardi 02 mars 2021

Rock Reamer Overview of rock reamer hole opener The Rock reamer produced by GREAT company is used to expand the diameter of the pilot hole and is mainly used for horizontal directional drilling of oil, natural gas, electric power, and other pipelines. The Rock reamer is designed for...

Samedi 27 février 2021

Quantité : 3000000PCS - Prix : USD0.015-USD0.50

Cosmetic glass bottles The glass bottle is a traditional packaging product, which is bright and transparent with good chemical stability and air permeability. It is easy to be formed, but it is heavy and fragile. 80% to 90% of glass packaging containers are glass bottles and cans...

Mercredi 24 février 2021

MEISU's polarization maintaining optical fiber array is a row of PM fiber of any specified orientation (error< 3 degree). The most common orientation of this polarization maintaining fiber alignment is slow axis horizontal, vertical or 45 degree tilted. PM FAU is normally used...

Samedi 20 février 2021

Quantité : 500000 Pie - Prix : $0.2 - $1500

Peristaltic Tubing is kind of biocompatible flexible tube in transparent, yellow or black colors, they have strict tolerance requirements on inner diameters to ensure high precision flowing volumes for peristaltic pump systems, they are mostly used in industrial, laboratory and medical...

Samedi 20 février 2021

Quantité : 500000 Pie - Prix : $0.2 - $1500

double male luer lock adapter provide a convenient way to connect soft tubing ID 1/16" to 1/4" with products that feature a female luer slip or luer lock end without the need for barbs or nuts, the material of medical grade PP ensure the high purity and suitable for non-corrosive...

Samedi 20 février 2021

Quantité : 500000 Pie - Prix : $0.2 - $1500

Luer fittings are series of plastic fittings designed with a male or female slip without any barbs or nuts to create the most convenient way to connect flexible tubes together, all the luer lock fittings are made of medical grade PP material suits for non-corrosive fluids and environment...

Vendredi 05 février 2021

ETCN offers cost-effective precision machining solutions whether you need a single part, a batch of prototypes. With the cnc precision machining services offered by ETCN, companies, and factories can produce parts of nearly any shape from soft metals like aluminum, harder metals like steel...

Mercredi 27 janvier 2021

Quantité : 1000 pcs - Prix : USD80-USD230

AG Drone T1 Flight Controller Autonomous operation Terrain following High positioning accuracy Low voltage alarm Pesticides monitoring AG Drone T1 Flight Controller AG Drone T1 Flight Controller AG Drone T1 Flight Controller AG Drone T1 Flight Controller Product DescriptionSpecification...

Mercredi 27 janvier 2021

Steel can be used to transport fluids and powdered solids, exchange heat, and make mechanical parts and containers. It is also an economical type of steel. The steel pipe is used to make the frame, strut and mechanical support of the building structure, which can reduce the weight...

Dimanche 24 janvier 2021

provider & manufacturing expert， 25 years of professional experience Innovative solutions for sustainable developments toward a better world Striving for excellence and continuous improvements to support your success Magnetic assembly incorporates magnet alloy and non-magnet material...

Dimanche 24 janvier 2021

Material Sintered Neodymium Iron Boron Dimensions Diameter Min.1 mm—Max.60 mm Tolerance Standard +/-0.05mm, Min.+/-0.02mm Magnetization Orientation Axial / Diametrical Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) 33M- 48M 100°C (212°F)...