COIL - 2312 Annonces

Lundi 08 août 2016

support ladder type structure suitable for cable tray, you can use a variety of specifications of wire coil Localisation : bazhou, 065700 kangxianzhuang, Personne à contacter : Jie Ynag, 86 0316 7399000

Samedi 06 août 2016

DP028-2: rated load 2T, thickness of bottom plate-6mm, dia of bottom plate-800mm, weight- 50kg DP028-3: rated load 3T, thickness of bottom plate-6mm, dia of bottom plate-850mm, weight- 65kg DP028-5: rated load 5T, thickness of bottom plate-6mm, dia of bottom plate-1200mm,...

Samedi 06 août 2016

Use: support ladder type structure suitable for cable tray, you can use a variety of specifications of wire coil Trapezoidal wire laying frame, commonly known as "cable support" for placement of cable tray, overhead wires or cables, adopts a hydraulic device, footing with ferry...

Dimanche 31 juillet 2016

Prix : 1 544,00 €

Warranty: 24 months guarantee for the whole unit. Features: 1.Safety: water and electric separately. 2.Simple installation: Compact design(Main unit and water tank),DIY installation is available to saving costs! 3.Conveninet: Intelligent remote controller,with simple key operation...

Vendredi 29 juillet 2016

Quantité : per carton - Prix : 20usd

we can supply coil nails, coil roofing nails ,staple, brads with good quality. Localisation : , 266300 jiaozhou, Personne à contacter : Jason HOU, 86 532 86321254

Vendredi 15 juillet 2016

Prix : negotiable

Since all metals used for coil windings have a positive temperature coefficient of resistance, NTC thermistors are especially useful for compensating resistance changes in devices subjected to temperature variations. Due to the high temperature coefficient of the thermistor as opposed...

Vendredi 15 juillet 2016

Quantité : 2k - Prix : 28usd/pc

1.Driver: 9mm neodymium magnet moving coil unit. 2.Frequency Response: 20~20K HZ 3.Impedance: 16ohms 4.Sensitivity: 105dB(+/-5dB) 5.Plug: 8pin Lightning 6.Cable Length: 1.2M+/-15% 7.Cable Jacket: TPE,flat type or round type 8.Cable cord: 6N OFC 9.Earphone Shell: Aluminum...

Jeudi 14 juillet 2016

Quantité : 1set - Prix : USD150000

PET bottle recycling machine is used to recycle the waste PET bottles, for example, the mineral bottles, beverage bottles and oil bottles etc. The flowchart is as following: 1, de-bale the packages, pre-wash the bottles. 2, remove the most labels and caps by label and cap remover...

Jeudi 14 juillet 2016

Quantité : 50000tons - Prix : 5.5~6.0

Established in 1984,is a professional manufacturer of enameled copper &aluminum wires in China. It is located in Shuanglin town, Huzhou city where is very near to Shanghai and Hangzhou. Covering an area of 150000㎡，we now have over 450 employees,with annual output 80000 metric tons...

Mardi 12 juillet 2016

Quantité : 1 - Prix : Depond on profile

Material Thickness: 0.8-1.5mm Main power: 7.5KW Material: PPGI, Galvanised Coil Diameter of Axis: Depend on Profile Material Width: Depend on Profile Cutting Blade: Cr12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic Cutting Forming Sation: 16 Steps Localisation : ,...

Mardi 12 juillet 2016

Material Thickness: 0.4-0.8mm Main power: 4KW Material: Galvanised Coil Diameter of Axis: Depend on Profile Material Width: Depend on Profile Cutting Blade: Cr12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic Cutting Forming Sation: 14 Steps Localisation : , 214000 Xibei Town...

Dimanche 10 juillet 2016

Quantité : 1 pc - Prix : 100usd/pc

Application Used to support wire reel when laying cable. Hold up the wire tray. Usage: for expanding the wire, the whole set of line on the six equal parts of the rolling disc, through the traction of the rotation of the wire. DP028-2: rated load 2T, thickness of bottom plate-6mm...

Dimanche 10 juillet 2016

Quantité : 1 pc - Prix : 100usd/pc

DP011-3: Rated Load-3T, apply for drum dia 700-2100mm, application of disc width-below 1500mm, shaft diameter-60mm, weight-75kg DP011-5: Rated Load-5T, apply for drum dia 700-2400mm, application of disc width-below 1700mm, shaft diameter-76mm, weight-115kg DP011-10: Rated Load-10T...

Dimanche 10 juillet 2016

Quantité : 1 pc - Prix : 100usd/pc

DP011-3: Rated Load-3T, apply for drum dia 700-2100mm, application of disc width-below 1500mm, shaft diameter-60mm, weight-75kg DP011-5: Rated Load-5T, apply for drum dia 700-2400mm, application of disc width-below 1700mm, shaft diameter-76mm, weight-115kg DP011-10: Rated Load-10T...

Dimanche 10 juillet 2016

Quantité : 1 pc - Prix : 100usd/pc

Application: applied in the supporting of cable drum. With trapezoidal structure, it can be applied in different kinds of reel specification. Hydraulic lifting make it lift easily, trundles installed on the bottom make it easy to move, simple operation, secure and durable. DP011-3...

Dimanche 10 juillet 2016

Quantité : 1 pc - Prix : 100usd/pc

DP011-3: Rated Load-3T, apply for drum dia 700-2100mm, application of disc width-below 1500mm, shaft diameter-60mm, weight-75kg DP011-5: Rated Load-5T, apply for drum dia 700-2400mm, application of disc width-below 1700mm, shaft diameter-76mm, weight-115kg DP011-10: Rated Load-10T...

Dimanche 10 juillet 2016

Quantité : 1 pc - Prix : 100usd/pc

DP011-3: Rated Load-3T, apply for drum dia 700-2100mm, application of disc width-below 1500mm, shaft diameter-60mm, weight-75kg DP011-5: Rated Load-5T, apply for drum dia 700-2400mm, application of disc width-below 1700mm, shaft diameter-76mm, weight-115kg DP011-10: Rated Load-10T...

Dimanche 10 juillet 2016

Quantité : 1 pc - Prix : 100usd/pc

DP011-3: Rated Load-3T, apply for drum dia 700-2100mm, application of disc width-below 1500mm, shaft diameter-60mm, weight-75kg DP011-5: Rated Load-5T, apply for drum dia 700-2400mm, application of disc width-below 1700mm, shaft diameter-76mm, weight-115kg DP011-10: Rated Load-10T...

Dimanche 10 juillet 2016

Quantité : 1 pc - Prix : 100usd/pc

Purpose: applicable to the line of the line construction in the development and release of the disc Features: the exhibition release speed is stable, not dumping, not derailed Cable stand appearance; horizontal cable stand and a vertical cable line frame, large cable line frame...

Samedi 09 juillet 2016

Material Thickness: 1.5-3.0mm Main power: 15KW Material: Carbon Steel, Galvanised Coil, Q235 Diameter of Axis: Depend on Profile Material Width: Depend on Profile Cutting Blade: Cr12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic Cutting Forming Sation: 14 Steps Localisation ...

Samedi 09 juillet 2016

Material Thickness: 0.4-0.8mm Main power: 5.5KW Material: Galvanised Coil Diameter of Axis: Depend on Profile Material Width: Depend on Profile Cutting Blade: Cr12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic Cutting Forming Sation: 16 Steps Localisation : , 214000 Xibei Town...

Samedi 09 juillet 2016

Material Thickness: 0.8-1.2mm Main power: 2 x11KW Material: Carbon Steel, Galvanised Coil,Q235 Diameter of Axis: Depend on Profile Material Width: Depend on Profile Cutting Blade: Cr12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic Cutting Forming Sation: 16-18 Steps Localisation ...

Samedi 09 juillet 2016

Material Thickness: 0.3-0.8mm Main power: 5.5KW Material: PPGI,Galvanised Coil Diameter of Axis: Depend on Profile Material Width: Depend on Profile Cutting Blade: Cr12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic Cutting Forming Station: 16-18 Steps Localisation ...

Samedi 09 juillet 2016

Main Technical Specification: Material Thickness: 0.3-0.8mm Main Power: 7.5KW Material: PPGI,Galvanised Coil Diameter of Axis: Depend ion price Cutting Blade: Cr12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic cutting Forming Sation;10-18 Steps Localisation : , 214000 Xibei Town...

Samedi 09 juillet 2016

Quantité : 1 - Prix : Depend on profile

Material Thickness: 0.3-0.8mm Main Power: 5.5KW Materrial: PPGI, Galvanised Coil Diameter of Axis: Depend on profile Cutting Blade: C12Mov Forming Speed: 0-15m/min Cutting Type: Hydraulic cutting Forming Sation: 10-18 Steps Localisation : , 214000 Xibei Town, Personne à contacter ...

Vendredi 01 juillet 2016

Quantité : 1 SET - Prix : 10000 USD

Product name: weld seam annealing system Feature for weld seam annealing system 1.IGBT(SIEMENS) technology, high conversion efficiency; Energy saving 15%-30% , compared to SCR/KGPS technology 2.Much more efficient than gas-fired and coal-fired method 3.100% start-up success rate...

Vendredi 01 juillet 2016

Quantité : 1 SET - Prix : 10000 USD

Production Name: rolling steel heating equipment Advanced features of rolling steel heating equipment 1.High Automation.This equipment is fully automatic operation,reducing labor cost and improving productive efficiency. 2.Our medium frequency heating equipment can work 24 hours...

Vendredi 01 juillet 2016

Quantité : 1 SET - Prix : 10000 USD

Production Name: medium frequency heating equipment Advanced features of medium frequency heating equipment 1.High Automation.This equipment is fully automatic operation,reducing labor cost and improving productive efficiency. 2.Our medium frequency heating equipment can work...

Vendredi 01 juillet 2016

Quantité : 1 SET - Prix : 10000 USD

Forever Furnace is specialized in designing and producing medium frequency hardening equipment with mature induction heating technology. Medium frequency hardening equipment applications: 1)Medium frequency Hot forging furnace is used for the heating of bars and rods larger than dia 12mm...

Vendredi 01 juillet 2016

Quantité : 1 SET - Prix : 10000 USD

Forever Furnace Stainless steel pipe annealing furnace 1. High Efficiency Intelligent Fixing Fusing & Annealling Equipment, Stainless Steel Pipe Online Solution Annealing Equipment, Material Bright Annealing Furnace 2. Application: Mainly used for industrial pipe, to make it...