CEMENTED - 214 Annonces

Samedi 14 novembre 2020

Prix : 100USD

Cemented carbide material is a kind of alloy material which is made of hard compounds of an insoluble metal and binder metal by powder metallurgy process. Binder metals are usually iron group metals, commonly cobalt and nickel. The hardened phase is the carbide compound of transition...

Samedi 14 novembre 2020

Prix : 100USD

Due to the high thermal conductivity of the cemented carbide, carbide roller has good heat dissipation, which shortens the time of the roll surface at high temperature, so the high temperature reaction time of the roll with the harmful impurities in the cooling water is short. Therefore...

Samedi 14 novembre 2020

Prix : 100USD

Carbide rod of which tungsten carbide grain size ranges from 0.2micron to 0.8micron, cobalt content ranges from 6% to 12%, hardness ranges from 91.4HRA to 95HRA. Carbide rod is the raw material to make cutting tools, such as end mills, reamers, turning tools, carbide planer cutters...

Mercredi 30 septembre 2020

Overview of PDC Cutter PDC cutters are made of diamond micro-powder and cemented carbide substrate sintered under ultra-high pressure and high temperature. It has high hardness, high wear resistance and thermal conductivity of diamond, and has the strength and impact toughness of...

Jeudi 10 septembre 2020

Prix : 0,50 €

Polycrystalline diamond composite(PDC) Polycrystalline diamond composite(PDC) sheet is made of diamond particles and cemented carbide matrix sintered at 60,000 atmospheres, high temperature and high pressure above 1500 ℃, and has the high hardness of diamond and the high toughness...

Mardi 01 septembre 2020

Prix : 1 000,00 €

Overview of PDC Cutter PDC cutters are made of diamond micro-powder and cemented carbide substrate sintered under ultra-high pressure and high temperature. It has high hardness, high wear resistance and thermal conductivity of diamond, and has the strength and impact toughness of...

Vendredi 31 juillet 2020

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

CVD diamond (chemical vapor deposition diamond). The mixture of carbon-containing gas and oxygen is excited and decomposed at a high temperature and a pressure lower than the standard atmospheric pressure to form an active diamond carbon atom, and the deposit is alternately grown...

Mardi 23 juin 2020

Quantité : 500000tons - Prix : $5-$200000

The tie-back assembly is a special tie back cementing tool for tieback operation. Tieback equipment allows existing liners with a receptacle to be extended to the surface or farther up hole, and provides a high-pressure seal at the top of a cemented or uncemented liner. TIW offers...

Mardi 16 juin 2020

Quantité : 10000 Piec - Prix : 150-10000

Overview of PDC Cutter PDC cutters are made of diamond micro-powder and cemented carbide substrate sintered under ultra-high pressure and high temperature. It has high hardness, high wear resistance and thermal conductivity of diamond, and has the strength and impact toughness of...

Samedi 12 octobre 2019

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

We have cvd diamonds for sale! CVD (Chemical Vapor Deposition) diamond. The mixture of carbon-containing gas and oxygen is excited and decomposed at a high temperature and a pressure lower than the standard atmospheric pressure to form an active diamond carbon atom, and the deposit...

Vendredi 20 septembre 2019

The impactor mainly relies on high-pressure air to drive the internal piston to hit the drill bit. Compressed air can also be used as pore washing medium. Pneumatic impactors can be divided into high and low wind pressures, valve type and valveless type. Usually the pneumatic impactor...

Mercredi 31 juillet 2019

CVD diamond (Chemical Vapor Deposition diamond). The mixture of carbon-containing gas and oxygen is excited and decomposed at a high temperature and a pressure lower than the standard atmospheric pressure to form an active diamond carbon atom, and the deposit is alternately grown...

Mercredi 17 avril 2019

The resin bond diamond grinding wheel has a good polishing effect. The grinding wheel is sharp and difficult to block when grinding. The specific features are as follows: 1. The grinding efficiency is high, and the grinding wheel consumption is relatively slow; 2. Self-sharpness...

Vendredi 29 juin 2018

- Double alloy screw barrel - 1. Product introduction 1) ordinary nitriding screw (SACM645) 2) tooth top welding double alloy 3) full coverage tungsten steel screw 4) All hard series NPT1, NPT2, NOT3 5) The ceramic film, diamond film surface 6) In-hole centrifugal casting alloy (sub-ABC...

Samedi 03 février 2018

Quantité : 300000ton/ - Prix : USD300/ton

Usage: Tube for conveying gas, water, and oil in both and natural gas industries etc. Casing: Casing is a large-diameter pipe that serves as the structural retainer for the walls of oil and gas wells, or well bore.It is inserted into a well bore and cemented in place to protect both...

Vendredi 05 janvier 2018

Prix : negotiation

YG series cemented carbide rods: this is the main component of tungsten carbide and cobalt. YG10X a particle carbide material, the cemented carbide rods with high hardness, flexural strength, has wear-resisting, and it is not easy to chipping, is not easy to break. Suitable for all...

Jeudi 28 décembre 2017

Prix : negotiation

cemented carbide powder grades WOCO Grade Powder Type Total Carbon Reference Products YF6 WC94 Co6 5.6-5.9 YQ3 YF12 WC88 Co12 5.5-5.8 515.1 515.074 YF11D WC89 Co11 3.9-4.3 ASTM-B214 71VF-NS YF12D WC88 Co12 3.6-4.2 516.074 72F-NS 71NS WC-489-1 YF17 WC83 Co17 4...

Mercredi 15 novembre 2017

Quantité : 1000 - Prix : 5,00 €

Diamond hand polishing pads for stone The product consists of diamond and metal powder and other ingredients made the grinding layer, is a hand-held tools. It is convenient and flexible for grinding, dressing, polishing various of parts. Applications: Mainly used for grinding of stone...

Mercredi 15 novembre 2017

Quantité : 1000 - Prix : 5,00 €

Diamond Hand Polishing Pads for Carbide Owing to the cemented carbide material is hard with a certain toughness of the metal material, diamond hand polishing pads for general purpose ( for stone and glass) is difficult to achieve satisfactory results. The main reason is that the difference...

Mercredi 15 novembre 2017

Quantité : 1000 - Prix : 5,00 €

Diamond Hand Polishing Pads The product consists of diamond and metal powder and other ingredients made the grinding layer, is a hand-held tools. It is convenient and flexible for grinding, dressing, polishing various of parts. Applications: Mainly used for grinding of stone, marble...

Samedi 04 novembre 2017

Hyperion Optics supplies uncoated 1/2 inch and 1 inch in diameter Calcium Fluoride (CaF2) lenses. Please talk to our technicians for your custom requirement. We are also able to provide coated products with AR coating through 1.65µm or 2-5µm. CaF2 has high transmission rate through 0...

Vendredi 03 novembre 2017

Tungsten carbide, cemented carbide, corrugated knifes, corrugator blades, tungsten carbide blade, rotary cutter blade, machinery blades, machine knifes, carbide knives, scoring knife, slitter knives, slitting blades, slitting machine, round cutters, round knives, disc blade, circular cutter...

Vendredi 03 novembre 2017

Tungsten carbide, cemented carbide, corrugated knifes, corrugator blades, tungsten carbide blade, rotary cutter blade, machinery blades, machine knifes, carbide knives, scoring knife, slitter knives, slitting blades, slitting machine, round cutters, round knives, disc blade, circular cutter...

Vendredi 03 novembre 2017

Tungsten carbide, cemented carbide, corrugated knifes, corrugator blades, tungsten carbide blade, rotary cutter blade, machinery blades, machine knifes, carbide knives, scoring knife, slitter knives, slitting blades, slitting machine, round cutters, round knives, disc blade, circular cutter...

Vendredi 03 novembre 2017

Quantité : 200 - Prix : 20,00 €

Diamond Grinding Wheel for Carbide Before we know about diamond grinding wheel for carbide tools, we must first understand the performance of cemented carbide tools, then we can choose the correct diamond grinding wheel that in line with the characteristics of cemented carbide. Carbide...

Mardi 24 octobre 2017

Quantité : 9999999999 - Prix : Negotiable

YM-CKG160 CNC high-speed vertical turning lathe 1. This system machine tool applies to cutting such tools as cemented carbide and ceramics to make rough, semi-fine processing and fine processing for internal and external cylindrical surface, conical surface, end face, cutting groove...

Mardi 24 octobre 2017

Quantité : 9999999999 - Prix : Negotiable

YM-CKG125 CNC High speed Vertical Turning lathe 1. This system machine tool applies to cutting such tools as cemented carbide and ceramics to make rough, semi-fine processing and fine processing for internal and external cylindrical surface, conical surface, end face, cutting groove...

Mercredi 26 juillet 2017

Quantité : 3000/month - Prix : 10,00 €

- Centerless Diamond Grinding Wheel - Centerless grinding is an OD (outer diameter) grinding process. The centerless grinding wheel is used for peripheral grinding of workpieces . It is mainly for rough, semi-finish and finish grinding of cemented carbide bars ,PDC cylinders, tungsten carbide...

Mercredi 26 juillet 2017

Quantité : 3000/MONRH - Prix : 1,50 €

- What Tools Will Be Used For Machining Piston - The advantages of tools for machining piston: * PCD mode milling tool: set of coarse and fine machining piston pin hole, circlip groove, and the hole hole / low chamfer as one. A one-time change knife multiprogramming, efficiency high...

Samedi 03 juin 2017

Quantité : 10 - Prix : Negotiable

Button Bit According to Tungsten Carbide'S shape, drill bit include button bits, chisel bits, cross bit etc. Normally rock drill button bits' body is made of high quality imported special steel, cemented carbide. Kingdrilling tungsten carbide buttons are with superior wear resistance...