DEPTH - 2113 Annonces

Mercredi 29 juin 2016

Quantité : 1 - Prix : usd5000

Fiber laser marking machines Type KFp Simple,KF1 Universal, KF2 Universal,KFa Advanced Laser type/Wavelength YLP/1064nm Laser power 10W 20W 30W 50W Beam quality M2 <3</p> Pulse width ≤100ns Pulse repetition frequency 20kHz ~ 200kHz Power stability ...

Mercredi 29 juin 2016

Quantité : 1 - Prix : usd5000

Fiber laser marking machines Type KFp Simple,KF1 Universal, KF2 Universal,KFa Advanced Laser type/Wavelength YLP/1064nm Laser power 10W 20W 30W 50W Beam quality M2 <3</p> Pulse width ≤100ns Pulse repetition frequency 20kHz ~ 200kHz Power stability ...

Mercredi 29 juin 2016

Quantité : 1 - Prix : usd5000

Fiber laser marking machines Type KFp Simple,KF1 Universal, KF2 Universal,KFa Advanced Laser type/Wavelength YLP/1064nm Laser power 10W 20W 30W 50W Beam quality M2 <3</p> Pulse width ≤100ns Pulse repetition frequency 20kHz ~ 200kHz Power stability ...

Mercredi 22 juin 2016

Quantité : RMB - Prix : 1 000,00 €

Established in 1998, CAN GAS SYSTMES COMPANY LIMITED, a reputable manufacturer of on-site nitrogen and oxygen plants and kinds of gases systems, has a production and R&D center with an area of 28,000 square meters, and passed ISO9001 quality management certification, BV certification...

Dimanche 19 juin 2016

Quantité : 1 - Prix : 6700USD

CO2 LASER MARKING MACHINE Type KCs Simple,KC1 Fast,KC2 Universal Laser type/Wavelength 10.6um Laser power 10W 30W Marking size 100mm x 100mm 180mm x 180mm or Order Marking depth Adjustable Marking line speed 7000mm/s Marking width Min 0.1mm(100μm) Marking...

Samedi 11 juin 2016

Prix : 800usd/set

1)Electric winch by driving devices, wire rope winding system, commonly the fetch device and safety protection device, etc 2) Driving devices include: motor, coupling, brake, reducer, gear box, drum etc. 3)Wire rope winding system include: wire rope, drum, crown block and travelling...

Mardi 07 juin 2016

Quantité : 10 - Prix : $48

Product features: 1. Light source adopts United State CREE brand, XML-U2 white light LED, High light efficiency, low energy consumption, life up to 100,000 hours. 2. Button operation: First gear 100% high light; second gear 30% low light; third gear is power off. Long time press...

Vendredi 27 mai 2016

Quantité : 1 - Prix : 10 000,00 €

AOD is the refining equipment of argon oxygen decarburization. It's named after the acronym of its English name. Its configuration is similar to converter which is set on a support ring tilting front and back and is fixed with dowel. On the side bottom of the furnace, spray lances...

Mardi 17 mai 2016

Quantité : 2000 SETS - Prix : 6500USD

Our Saturn and Mercury therapy laser systems provide a deeper depth of tissue and ultimately provide a dose that result in positive reproducible outcomes, with our professional therapy handpiece. Laser Type GaAIAs diode laser Model Sat20/Sat30 Wavelength 635nm/810nm/910nm/940nm/980nm/1064nm...

Jeudi 28 avril 2016

Quantité : 1 set

Application: Automatic blister packaging machine is a kind of pharma machine which can put ampoule, vial, capsule, tablet into blister and seal by heat. It widely used in aluminum plastic pack for pharmaceutical plant, hospital, health care product plant, foodstuff, electron component etc...

Vendredi 22 avril 2016

Quantité : 10000 piec - Prix : 90000$/piece

These hoists typically have lower capital costs when compared to drum hoists due to characteristic lighter, single-drum constructions and lower installed power requirements. Design is of necessity for infinite fatigue life. The head ropes of a Koepe hoist are subjected to cyclic...

Mercredi 20 avril 2016

Technical Specialities EWS37 Max. log input length 140 cm Max. log input width 45 cm Cutterheads 4 pcs. Knives per cutterhead 6 pcs. Speed of cutterhead 4500 rpm. Diameter of cutterhead 140 mm Drive capacity 25x2 = 50 HP (37KW) Shaving depth 1mm - 5mm Travelling distance of carriage...

Mercredi 06 avril 2016

- Solid CBN inserts - - - Solid CBN RNMN190700 inserts 1.Application: for machining high manganese steel 2.tech parameters for our RNMN 190700 (a)line speed V=60 to 120 m/min (b)feed F=0,5-0,6 mm/rev (c)cutting depth= 5-6mm (d) HRC of workpiece being processing= 60-65 (e)diameter...

Mercredi 30 mars 2016

Quantité : 30 - Prix : contact us

JL-X IEC60529, IEC60598 and IEC60335 spray machine for waterproofing test Introduction: JL-X waterproof test system is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5: 2000. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8...

Mercredi 23 mars 2016

SSP3117C home inverter system Key Features: 1.Pure sine wave output 2.High frequency full bridge design . 3.Built-in MPPT solar charge controller 4.Selectable input voltage range for home appliances and personal computers 5.Selectable charging current based on applications 6...

Jeudi 10 mars 2016

Introduction: JL-X waterproof test system is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5: 2000. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test...

Jeudi 10 mars 2016

Introduction: ZRS-3H The Glow-wire Tester adopts high temperature coating spraying on steel structure, Glow wire tester is to test glow wire of lighting lamps, electronic products and household appliances, and UL 746A, IEC829, DIN695, VDE0471, the Glow wire tester ZRS-3H is suitable...

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Mardi 08 mars 2016

- Segment screw barrel/Screw element/Segment screw and barrel - - Screw elements for counter-rotating parallel twin screw extruder Specification: Parallel twin screw diameter: Φ 18-Φ 177mm - The building block screw consists of core spindle and several hollow screw segments...

Mardi 08 mars 2016

Planetary screw barrel/ Planetary screw and barrel for plastic extrusion Specification: Diameter: Ø15-Ø500 L/D ratio: 5: 1 We can manufacture all types of screws and barrels according to clients' requirement. Base Materials: 1)38CrMoAlA(JIS SACM 645) 2)42CrMo(AISI 4140) ...

Mardi 08 mars 2016

Bimetallic conical twin screw and barrel for plastic extrusion machines Specification: 45/90, 45/100, 50/105, 51/105, 55/110, 55/120, 58/124, 60/125, 65/120, 65/132, 68/143, 70/135, 70/140, 75/150, 80/143, 80/156, 92/188 The above are standard specifications, we can customize...

Mardi 08 mars 2016

barrel for rubber extruder Pin Screw and Barrel Specification: Ø75mm~Ø200mm Cold/Heat Feed Screw Specification: Ø65mm~Ø650mm Screw structure and compression ratio can be designed according to different products and raw material. Base Materials: 1)38CrMoAlA(SACM 645) 2)42CrMo(AISI...

Mardi 08 mars 2016

Single screw and barrel for extruder Specification: Diameter: Ø15-Ø300 L/D ratio: 15-55 Base Materials: 1)38CrMoAlA(SACM 645) 2)42CrMo(AISI 4140) 3)Cr12MoV(SKD11) 4)4Cr5MoSiV1(SKD61) 5)9Cr18MoV 6)40Cr Bimetallic Alloy Materials: 1)Fe-based alloy 2)Ni-based alloy 3)Co-based...

Mercredi 24 février 2016

Before the curing Appearance White paste Relative density 1.60～1.70(g/cm3) Surface drying time ≤15(min) After the curing Tensile strength ≥1.5（MPa） Elongation At Break ≥150(%) Shear strength ≥2.0(MPa) Hardness 35～45(Shore A) Temperature Range -60～200(℃) Volume resistivity 2...

Mercredi 24 février 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Vendredi 22 janvier 2016

Quantité : Grade A - Prix : $15~$200

- - Brand Name: GREENLAND, GREENROAD, HATOX Design: Radial Size: from R13 to R24 Width: 125-280mm Certification: ISO9001, ISO/TS16949, ECE,EU-LABEL,DOT,SMARTWAY, SONCAP,CCC, NOM,INMETRO,SNI, BIS, ITS,etc. Place of Origin: Shandong, China (Mainland) Warranty: 60,000-80,000 Km under...

Lundi 11 janvier 2016

Quantité : 1 pc - Prix : 65USD/pc

Headband dental loupes Magnification: 2.5X or 3.5X Type: Headband Working distance: 320 to 400mm Field of view: 60 to 80mm Depth of view: 60mm Localisation : Yanbu Road,Nanhai District, Foshan, France, 84155 Foshan, Personne à contacter : Salina Zhang, 88554441

Mercredi 06 janvier 2016

Specifications Conveyor magnetic suspension plate suspends above the conveyor belt or the head pulley and lifts tramp metal from the product burden as it passes through the powerful magnetic field.Cleaning is achieved by manually removing the collected tramp metal from the face of the magnet...