RANGE： - 22455 Annonces

Dimanche 05 novembre 2017

Quantité : 1 piece - Prix : USD 72 Dollars

DM-980 DMR Digital radio 5W TIER1 AND TIER2 compatible with MOTO - Built for dual-mode (Digital+ Analog) - Tier1&Tier2 compatible motorola - record function - 136-174MHz/400-480MHz - 1000Channels - Versatile Voice Call (Private call,group call, all call and emergency call)...

Samedi 04 novembre 2017

With the rapid development of military weaponry and correlative targeting and monitoring systems, ZnS is widely utilized in multi-spectral IR applications. Its relatively high transmittance through 3-5µm and 8-10µm enable ZnS being an ideal choice for multi-spectral applications. Further...

Samedi 04 novembre 2017

Hyperion Optics utilize optical grade silicon which is specified with a resistivity of 10-40 Ohm-cm higher than most semiconductor applications. For CZ grade silicon (Czochralski method) has a absorption band at 9μm, this is acceptable if the application is used range of 3 to 5μm thermal band...

Samedi 04 novembre 2017

Sapphire is the best medium for spherical lenses that require a broad spectrum of light transmission and high optical clarity, especially in demanding applications such as laser system or working under harsh environmental conditions. With its excellent hardness, high thermal conductivity...

Samedi 04 novembre 2017

In the range of 2-12 μm, germanium is the most commonly used material for the production of spherical lenses and windows for high efficiency infrared in the imaging system. Germanium has a high refractive index (about 4.0 through 2-14μm band), usually do not need to be modified due...

Samedi 04 novembre 2017

NHG introduced seven Chalcogenide materials category for designers and manufacturers namely IRG201, IRG202, IRG203, IRG204, IRG205, IRG206, IRG207, with actual tested refractive index and transmittance through the wave range of 0.8µm up to 20µm data available. Download HUBEI NEW HUAGUANG...

Samedi 04 novembre 2017

The small high efficiency air filter test device is a highly targeted filter test equipment, based on the "European standard EN1822-5: 2000 determining the efficiency of filter element " principle, but in line with the domestic industry on the finished product filter, filter material...

Samedi 04 novembre 2017

Slips and trips are the most common cause of major injuries at work and can happen almost anywhere-broken bones and other serious injuries frequently result from major slips and slipping can also be the initial cause for a range of other types of accident, such as fall from height...

Samedi 04 novembre 2017

Airflow method to measure the permeability of tobacco, cut tobacco, thickness, length, and added, fully able to affect the size of the draw resistance. When you exert a certain pressure of airthe fixed mass and volume of tobacco, by measuring the gas flow, it can test the ventilationof...

Samedi 04 novembre 2017

Wool fiber fineness value is measured by the airflow method. When exerting a certain pressure air to a certain amount of mass and volume of sample wool fiber, because the fineness of wool fiber is different, the flow of gas through is different, and by measuring the gas flow, the...

Samedi 04 novembre 2017

Products meet the standard requirements, which is YY0469-2004 "Medical surgical mask technical requirements" and YY 0969-2013 "Disposable medical masks", medical face mask air exchange pressure difference tester is measured by gas pressure difference on both sides of the mask (ie...)

Samedi 04 novembre 2017

Technical Parameters This test system is suitable for the field of ventilation and air conditioning, as well as the clean air conditioning field of the electronic industry, the nuclear industry, the pharmaceutical industry, the food industry and others. It is designed and manufactured...

Samedi 04 novembre 2017

This device is mainly used to test the flame retardant performance of medical masks. The combustion performance of the mask is measured through a head mold wearing a mask de-vice to contact with the flame at a certain linear speed. The device is mainly used in the field of medical protection...

Samedi 04 novembre 2017

This product uses fluorescent UV lamps, combined with temperature and humidity device to simulate the material decline in color, brightness, strength and cracking, spalling, powder, oxidation damage via the high temperature sun light (UV), high humidity, condensation, dark cycle etc...

Samedi 04 novembre 2017

The rapid extraction of oil and oil is specially used to quickly obtain the oil content of the top and similar materials. Through the container and evaporation, it can detect the grease and oil content of wool and synthetic fiber samples. You can optionally use the 1, 2 or 3 extraction...

Samedi 04 novembre 2017

The vibration fiber fineness tester works based on the stringprinciple. First, it measures the natural vibration frequency of the fiber with known vibration fiber length and tensile force, then automatically calculates the linear density of the single fiber. The fineness measurement range is 0...

Samedi 04 novembre 2017

The Tester is used to determine the UV transmittance and anti-ultraviolet performance of textiles. You can directly obtain the UV protection factor of textiles UPF. 1. BS 7914：1998 Method of test for of erythemally weighted solar ultraviolet radiation through clothing fabrics. 2....

Samedi 04 novembre 2017

The negative ion generation tester is mainly used to detect the negative ion generation of textiles, and evaluate the negative ion generation capacity. 1. Inhalation method was used to collect air ions with collect ions mobility ratio more than 0.15 (cm2 / v · s). 2. Measuring range...

Samedi 04 novembre 2017

Fabric water vapour permeability testing apparatus is for assessment of the water vapour permeability ability of fabrics by moisture permeable cup moisture absorption method. The instrument is used to determine moisture (steam) permeability of various types of fabrics (including moisture...)

Samedi 04 novembre 2017

Standards Application ISO 5660 Reaction to fire tests-Heat release, smoke production and mass loss rate. ASTM E 1354 Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter BS 476 Pt.15 Fire tests on building materials and...

Samedi 04 novembre 2017

The new high efficiency filter material filtration performance tester uses the current international mainstream particle counting method, the high efficient large flow laser particle counter to test the basic filtration performance parameters of filter material, such as filtration efficiency...

Samedi 04 novembre 2017

The UV aging test chamber is suitable for all kinds of geo-synthetics, such as light resistance, weather resistance and light ageing The exposure test of the sample was carried out in a fluorescent UV lamp vessel in a controlled environment. It can simulate and strengthen the environmental...

Samedi 04 novembre 2017

Introduction： Weatherproof test: This test is conducted to find out the impacts on some items and parts in a natural condition by such factors as sunbeam, ozone, rain, snow, temperature and humidity. It will also find out the resistance of the aforesaid items to the aging effects...

Samedi 04 novembre 2017

Technical Parameters： It's great significant for AFC-133 filter test bench to optimize and develop filter materials, ensure quality assurance of the production process. Dust capacity and filtration efficiency are the most interesting properties of filter material properties, depending...

Samedi 04 novembre 2017

Light transmittance test machine for fabric is used to determine the total visible light transmittance of the fabric to evaluate the shading properties of the fabric and is suitable for sheet textile products such as curtains. Test standard : JIS L1005-2009 Test principle: 1. A light...

Samedi 04 novembre 2017

fabric flame retardant performance test machine is mainly used to determine the textile flame, smoldering and carbonization tendencies. Suitable for flame-retardant woven fabrics, knitted fabrics, coated products, quilted products. Scope of application: fabric flame retardant performance...

Vendredi 03 novembre 2017

Quantité : 1PCS - Prix : 83.69USD

- 6 dB Basestation MINI DIN Tapper Directional Coupler - Product Description What is Directional coupler? Directional couplers are most frequently constructed from two coupled transmission lines set close enough together such that energy passing through one is coupled to the other...

Vendredi 03 novembre 2017

Quantité : 1PCS - Prix : 222USD

- Low PIM -150dBc 698-2700MHz 4.3-10 connector 2 Way Microstrip splitter - Product Description What is power splitter? Power splitter is a kind of all input signal energy will be divided into two or more signals energy output devices, also can in turn be synthesized multi -channel...

Vendredi 03 novembre 2017

Quantité : 1PCS - Prix : 46.69USD

- Low PIM -150dBc 698-2700MHz DIN type IP65 waterproof 20-40dB Directional Coupler - Product Show Specifications Electrical Specifications Frequency 698-2700MHz Model LCTC0727-20PDO LCTC0727-30PDO LCTC0727-40PDO Specifications 20dB 30dB 40dB Attenuation ±1.2 ±1.5 ...

Vendredi 03 novembre 2017

Quantité : 1PCS - Prix : 42.69USD

- High Quality Low PIM -150dBc 698-2700MHz DIN type IP65 waterproof 5-15dB Directional Coupler - Product Show Specifications Electrical Specifications Frequency 698-2700MHz Model LCTC0727-05PDO LCTC0727-06PDO LCTC0727-07PDO LCTC0727-10PDO LCTC0727-15PDO Specifications...