SPRINGS - 2539 Annonces

Mercredi 18 octobre 2017

Brief Introduction. This series reducing valve is direct action membrane type spring reducing valve, mainly composed of membrane, adjusting spring, valve seat and valve flap. It sense the change of lower stream pressure through the membrane and drive the valve flap, change and control...

Mercredi 18 octobre 2017

Brief Introduction. This series reducing valve is direct action membrane type spring reducing valve, it is manufactured and designed on the basis of advantages of foreign same products. It is mainly composed of membrane, valve flap, and adjusting spring. It sense the change of lower...

Mercredi 18 octobre 2017

Brief Introduction. This series reducing valve is pilot piston type reducing valve, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat, valve flap, membrane...

Mercredi 18 octobre 2017

Brief Introduction. This series reducing valve is direct acting bellows pressure reducing valve, It is mainly composed of bellows, adjusting spring, valve seat and valve flap. It sense the change of lower stream pressure through the bellows and drive the valve flap, change and control...

Mercredi 18 octobre 2017

Brief Introduction. This pressure reducing valve is robust direct acting bellows pressure reducing valve designed for use on steam,air and inert industrial type gases.The valve is available in four nominal sizes: DN25,DN32 ,DN40 and DN50. Set the outlet pressure through adjusting spring...

Mercredi 18 octobre 2017

Brief Introduction. RP-6 high-sensitivity steam pressure reducing valve is pilot piston type pressure reducing valve mainly used for steam.The product made following improvement on the basis of normal pressure reducing valve, enlarge the piston area, change the throttle structure...

Mercredi 18 octobre 2017

Brief Introduction. This series reducing valve is pilot piston type reducing valve for steam, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat, valve flap...

Mercredi 18 octobre 2017

Brief Introduction. Y14H/F Direct Acting Bellows Pressure Reducing Valve is newly improved product based on MIYAWAKI. This Direct Acting Bellows Pressure Reducing Valve material is Stainless steel, which can be used for some corrosive medium, it can also be used for Air, Steam, etc...

Mercredi 18 octobre 2017

Brief Introduction. DP27 Pilot Operated Pressure Reducing Valve is the new type pilot extra-huge membrane pressure reducing valve developed by our company,similar to Spirax Sarco Design. It is greatly improved on basis of normal pressure reducing valve. The membrane use new material...

Mercredi 18 octobre 2017

Low Temperature Pneumatic Globe Control Valve / With Extended Stem Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve Disc, the unbalanced force is small, the permission...

Mercredi 18 octobre 2017

HCB Cage Type Double Seat Pneumatic Pressure Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure...

Mercredi 18 octobre 2017

HCN Low Noise Cage Type Regulating Valve is mainly designed for reducing the medium noise. As the gas will expand, many Symmetric holes were designed to reduce pressure drop. The flow port is S pattern, and the flow-guiding part around the cage can also make the fluid flow smoothly...

Mercredi 18 octobre 2017

1. HLC Small Size Single Seat Pneumatic Pressure Control Valve / Sleeve Type Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the...

Mercredi 18 octobre 2017

1. HTS Globe Type Pneumatic Diaphragm Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential...

Mercredi 18 octobre 2017

1. HTS Globe Type Pneumatic Diaphragm Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential...

Mardi 10 octobre 2017

Brief Introduction: Rubber elasticity tester, Rubber strikes the resilience elasticity tester for testing vulcanized rubber, experiments, moving iron bars, iron bars so that the end position in the scale of 100, and then the iron bar to fall freely read the fourth, five or six times...

Lundi 09 octobre 2017

Element PS7100 2 418 455 333 for IVECO / PE6P130A720RS7226 Ve Pump Plunger 2 418 455 333/ 2455-333 For Pump Injector Fuel Element For Engine Injector Pump Parts Common Rail is the fuel injection system that meets strict emission regulations. It includes a high-pressure pump, injector...

Lundi 09 octobre 2017

Diesel Fuel Plunger Type PN 090150-5673 For Engine Pump Parts EP9 plunger 090150-5673 / 090150-3250 Denso element/Barrel Common Rail is the fuel injection system that meets strict emission regulations. It includes a high-pressure pump, injector, rail, filter and ECU. The current...

Lundi 09 octobre 2017

Diesel Engine Plunger 090150-3253 Application for Toyota Fuel Injector Plunger 090150-3253 Diesel Element Application for Toyota Common Rail is the fuel injection system that meets strict emission regulations. It includes a high-pressure pump, injector, rail, filter and ECU. The current...

Lundi 09 octobre 2017

6N7527 New Caterpillar Plunger & Barrel Assembly,Plunger 6N7527 fit for Caterpillar D333C& 3306. Supply Plunger In Injection Pump c For New Caterpillar Plunger Injector For Diesel Engine Parts Common Rail is the fuel injection system that meets strict emission regulations...

Lundi 09 octobre 2017

Diesel Fuel Plunger 2 418 455 040 For Engine Pump Parts For VOLVO Diesel Element Plunger BOSCH 2 418 455 040. OEM No.: 2418455040. Ducoo No.: DU 2418455040. Engine Type: PE6P120A320RS3134. Vehicle Model: VOLVO Common Rail is the fuel injection system that meets strict emission regulations...

Lundi 09 octobre 2017

Diesle Plunger/Element P Type 2 418 455 055 For VOLVO PE6P110A320RS3080 BOSCH 2 418 455 055. OEM No.: 2418455055.Engine Type: PE6P110A320RS3080. Vehicle Model: VOLVO,Plunger 2 418 455 055 2455-055 For VOLVO PE6P110A320RS3080 Common Rail is the fuel injection system that meets strict...

Lundi 09 octobre 2017

Diesel Fuel Plunger 2 418 455 040 For Engine Pump Parts For VOLVO Diesel Element Plunger BOSCH 2 418 455 040. OEM No.: 2418455040. Ducoo No.: DU 2418455040. Engine Type: PE6P120A320RS3134. Vehicle Model: VOLVO Common Rail is the fuel injection system that meets strict emission regulations...

Lundi 09 octobre 2017

Isuzu Fuel Pump element 131153-6220 A741 AD type plunger Diesel plunger 131153-6220 A741 fit for 6D17 ZEXEL 131153-6220. OEM No.: 1311536220. Engine Type: 6D17 Common Rail is the fuel injection system that meets strict emission regulations. It includes a high-pressure pump, injector...

Lundi 09 octobre 2017

Fuel Injector Plunger 2 418 425 981 Injgector Fuel plunger for PES6H120/720/3LS1018 Stamping No. Vehicle Model, Engine/PUMP. CZ-B425 981, 2 418 425 981, 2425 981, MAN, PES6H120/720/3LS1018. CZ-B425 Common Rail is the fuel injection system that meets strict emission regulations. It...

Lundi 09 octobre 2017

Ve Pump Plunger 1 418 415 544 Injector Fuel Element For MERCEDES-BENZ, PES4MW100 CZ-B415 043, 1 418 415 043, 1415 043, RENAULT, PES6MW100/320RS1009 ... CZ-B415 544, 1 418 415 544, 1415 544, MERCEDES-BENZ, PES4MW100 Common Rail is the fuel injection system that meets strict emission regulations...

Mardi 26 septembre 2017

Quantité : 50kg - Prix : USD2.0/kg

Coarse wire (5.5mm-1.0mm) Material: 304, 304L, 308, 316, 316L, 321, 410, 430, etc. Applications: Standard parts, wire rope, spring, welded wire, wire mesh weaving, etc. Medium wire (1.0mm-0.09mm) Material: 304, 304L, 316, 316L, 321, etc. Applications: Wire mesh weaving, wire redrawing, etc...

Mardi 26 septembre 2017

Quantité : 50kg - Prix : USD2.0/kg

Product Descriptiion Stainless Steel Weaving Wire Material 304( L ), 310S, 316( L, Cu ), etc. Wire Diameter Dia. 0.1~13.0mm Characteristics Shiny surface condition; Excellent workability Application Welding and knitting braiding, weaving mesh, conveyor belts and filters, etc...

Samedi 23 septembre 2017

Brief Introduction: Rubber elasticity tester, Rubber strikes the resilience elasticity tester for testing vulcanized rubber, experiments, moving iron bars, iron bars so that the end position in the scale of 100, and then the iron bar to fall freely read the fourth, five or six times...

Mardi 19 septembre 2017

Quantité : 200kg - Prix : USD6.5/kg

Product Description Brass : ordinary brass it is an alloy composed of copper and zinc. application: A water tank with water, for drainage pipe, medal, corrugated pipe, a serpentine pipe, condenser, shell and a variety of complex shape plastic products, hardware items, decorations...