SPEED - 15942 Annonces

Dimanche 12 octobre 2008

● Extrusion resin: Polystyrene Formular ● Sheet thickness: 1.0 ~ 3.0 mm ● Sheet width: 1000 mm (it depends) ● Foam ratio: 8 ~ 14 ● Extrusion Capacity: 250 kg/ hr (it depends) ● Line Speed: 5 ~ 20 M/m (it depends) Merits ● Attractive pearl looking...

Dimanche 12 octobre 2008

● Extrusion resin: PP/PS/HIPS/GPS ● Sheet thickness: 0.3~1.5 mm ● Sheet width: 1000 mm (it depends) ● Extrusion capacity: 500 kg/hr (it depends)/ PP 800 kg/hr (it depends)/ PS ● Line speed: 5~20 M/m (it depends) FUNCTION ● Sandwich, hamburger and...

Dimanche 12 octobre 2008

Prix : mail

●Remote monitoring functions: errors can be easily solved via telephone lines. ●Communication-type control system for fast data exchange ●Fully digitized SCR thermostat with three-phase balance function. ●Temperature, speed and formula memory functions. ...

Samedi 11 octobre 2008

Box Feeder is one of feeder’s equipments which balances and rations the materials that you feed in. By adjusting the height of flashboard and the speed of conveyor belt, it will control the quantity of feed-in raw materials and crush the large soft mud.Localisation : No.57 minzhu Road...

Vendredi 10 octobre 2008

SUN-OT2800 is a mini-OTDR used for installing, checking and maintaining the fiber network. It has become an effective tool for the engineers. Features:  Handheld: small size, light weight and crashworthiness  High light LCD screen: working in sunlight and under -10...

Jeudi 09 octobre 2008

Stainless steel shots are widely used for deburring and brightening of the surface of aluminium alloy, zinc alloy, colorful metal and stainless steel, etc. They are of austenite structure with execellent features of high strengh and tough, low consumption, none dust, quick clean speed...

Mardi 07 octobre 2008

Quantité : 10k - Prix : 5$/pcs

Auto dialers, our mature products for five years, widely used by a number of customers all over the world. Line power, can auto call, auto routing, store up 8 IP card accounts, Remote progarammable, can be controlled by telephone; CE certification approved. Our factory can develop...

Jeudi 02 octobre 2008

Quantité : high

Features: 1. Lift feed table with footswitch control. 2. Manual fold and feed, automatic glue application on glue lap. 3. Idle wheel glue application, with self flow compensation, ensures no glue breaking during running. 4. Side baffles squaring, with wind compression forming, provides...

Jeudi 02 octobre 2008

Specification: 1. Used Materials: Cardboard E, B-flute cougated and printed board. 2. Fundamental Pattern : Straight line, Double sides and Crash-lock, Bottom Box. 3. Glue: Emulsion Type. 4. Speed : Max. 200m/min 5. Straight Line working size : Max. 1000mm×700mm, Min. 150mm×80mm 6...

Mardi 30 septembre 2008

Rafting Boat DRF380 Over Length : 380 cm Over Width : 175 cm Tube Diameter :52 cm Air Chamber : 5+2 Max Passenger : 8 Max Loading : 900 kg Gross Weight :56 kg Net Weight : 52 kg Packing Size : 129*72*35 cm 20'/40 'Container : 67/150PCS Contact:jiner at lianya-industry point com The...

Samedi 27 septembre 2008

Quantité : 30 sets

QTZ63(TC5610)Self-erecting Tower Crane with Maximum Lifting Capacity of 6T and Maximum Working Range of 56m Key Specifications/Special Features: Model number: QTZ QTZ63(TC5610) • Maximum lifting weight: 6 T • Maximum working range: 56m • End lifting weight: 1.00T • Working range: 2...

Samedi 27 septembre 2008

Quantité : 30 sets

QTZ160(6516)Self-erecting Tower Crane with Maximum Lifting Capacity of 12T and Maximum Working Range of 65m Key Specifications/Special Features: Model number: QTZ100(TC6013) • Maximum lifting weight: 12 T • Maximum working range: 65m • End lifting weight: 1.6T • Working range: 3 to...

Vendredi 26 septembre 2008

. 1) Solar powered, no other batteries is required 2) The logo will flash under any kind of light, such as lamp light, sun light. 3) Waterproof solar powered flashing LCD with image inside per your specification, making your logo or advertise more attractive and motional. 4) Good...

Jeudi 25 septembre 2008

As European models, XHBC1050 series punching & die-cutting machine, die-cutting & stamping machine, and holographic positioning & stamping machine feature high precision, high speed, durability and stable performance. They adopt international leading configuration and have come up...

Samedi 13 septembre 2008

Aerial platform of 12 m working height -. Installed proportional remote-control system & OP desk controller for one man operation -. Realization of safe aerial platform work with automatic leveling of platform -. Rapid boom extension speed with multi-section boom system -. Safe working...

Mardi 09 septembre 2008

1.You can get target’s latitude and longitude by SMS or GPRS, and check position by google earth. 2. Auto Report position. 3.Send the last location if it enters into the blind area. 4.Add or change Username and Password. 5.Monitoring and SOS feature. 6.It will send an alert of Geofence...

Samedi 06 septembre 2008

Quantité : 200pcs - Prix : $4

Capacity: 128MB/256MB/512MB/1GB/2GB/4GB/8GB USB 2.0 interface Original flash chip Password setting Shock-proof and moisture-proof, plastic shell High speed to read at 16MB/s, write at 8MB/s. Hot plug and play Operating system: Windows98/NT/ME/2000/XP or higher (driverless above Win98...)

Lundi 01 septembre 2008

Quantité : 100

* SHARP 1/4' CCD Sensor * 6 pieces of IR LED/ LONG RANG IR LED: 20M * Heat-resistant * Mirror Function * Digital Signal Processor * BLC, Mirror, Flickless 1/100 Fixed Shutter Speed, Outdoor/Indoor Controlled by Dip Switch on Rear Panel * Low Power Consumption High S/N Ratio * AES/DC/VIDEO...

Samedi 23 août 2008

DHS 988 Based on ISUZU 1TON R.H.D TRUCK DIMENSION (L x W x D) : 3165 x 1745 x 1715 Application Vehicle : Not less than 1MT Payload Truck Max. Working Height : 9.2M ( from ground to the platform top) Max. Side reach : 6.2M Rotation Device : Reduction Gear by hydraulic Motor Swing angle/Speed ...

Jeudi 21 août 2008

Quantité : 1000 - Prix : 60usd

Specifications Max. cutting diameter: 505mm Engine type: air cooling, single cylinder,2-stroke Displacement: 51.2cc Rated output power: 2.2kw Idling speed: 2,800r/min Bar length: 20 Optical Guide Bar: 16"/20" Chain:Made in china chain 2-cycle oil/gasoline mixing ratio: 1:25 Fuel tank capacity...

Vendredi 15 août 2008

Quantité : many

Our company can supply you with all kinds of high quality tyre moulds. The detailed products including moulds of bicycle tyre, moulds of motorcycle tyre, high speed tyre, half steel tyre moulds, solid tyre moulds, project tyre moulds, capsule moulds, flap mould, inner tube mould, etc...

Vendredi 08 août 2008

Quantité : 1 - Prix : 13500 EUR

Vertical turning lathe Sedin 1512, Year of manufacture 1987. Maximum diameter of work piece – 1250 mm.,max height 1000mm.,weight of machine 16,2 ton., Price 13500 EUR. Table diameter 1120 mm Max. turning diameter 1250 mm Max. workpiece height 1000 mm Max. workpiece weight: - 3200 mm (5...)

Mardi 29 juillet 2008

Rigid Inflatable Boat HYP560 Over Length : 560 cm Over Width : 245 cm Tube Diameter : 58 cm Air Chamber : 5 Transom height : 52 cm Transom width : 108 cm Max Passenger : 9 Max Engine : 90 HP Max Loading : 970 kg Floor Type : Double FRP Gross Weight : 350 kg Packing Size : 555*210*125...

Mardi 29 juillet 2008

Rigid Inflatable Boat HYP580 Over Length : 580 cm Over Width : 245 cm Tube Diameter : 58 cm Air Chamber : 5 Transom height : 52 cm Transom width : 182 cm Max Passenger : 10 Max Engine : 90 HP Max Loading : 1047 kg Floor Type : Double FRP Gross Weight : 400 kg Packing Size : 510*180*90cm...

Mardi 29 juillet 2008

Rigid Inflatable Boat HYP660 Over Length : 660 cm Over Width : 245 cm Tube Diameter : 58 cm Air Chamber : 5 Transom height : 52 cm Transom width : 182 cm Max Passenger : 12 Max Engine :150 HP Max Loading : 1200 kg Floor Type : Double FRP Gross Weight : 600 kg Packing Size : 655*270*105...

Lundi 28 juillet 2008

Open、straight and compact honeycomb micro-hole is the most effective splitter material, specially suitable for mass transferring and heat exchange. It will make the air speed more uniform if the aluminum honeycomb rectifying panel is used in the spinning machine, as well as...

Dimanche 27 juillet 2008

Quantité : 10000pcs

1. 550TVL, 1/3“Hi-resolution color Sony CCD 2. 10~40mm Vari-focal auto iris lens 3. Separate glass: no IR diffusion and fog 4. Viewing angle: horizontal:33°~5° 5. Available IR distance: 5~30M 6. Designed for traffic surveillance 7. Clearly capture the number plate when car speed is...

Vendredi 25 juillet 2008

This machine is used for breaking, plasticating and mixing of rubber materials. The rollers are made of chilled cast iron with wear-resistant hard surface. The two rollers are grooved. The bored rolls can be cooled homogeneously through inputting steam and cooling water. The two rollers...

Vendredi 25 juillet 2008

Cordless Screwdriver ●Voltage: 7.2V, 230V~50Hz ●Power: Li-ion, 1000mAh ●No-load speed: 200/600rpm ●Clutch: 23 setting rings ●Max torque: 6/2Nm ●Motor: Chinese motor ●Chuck: 1/4"(￠6.35mm) ●Charge time: 3-5 hours, GS ●Switch...

Vendredi 25 juillet 2008

Professional Chain Saw Sharpener ●Rated Voltage 110V-240V～ ●Rated Frequency 50HZ/60HZ ●Rated Input Power: 230W ●Max. Speed: 3000RPM ●Includes 145mm x 22.3mm x 3.2mm grinding wheel. With working light, aluminum Base and shell ●Certificate...