MOLD|FILTER - 8164 Annonces

Jeudi 26 octobre 2023

Low differential pressure transmitters and low cost pressure sensor controller of LEFOO pressure control have a wide application for air-conditioning/ventilation, duct static pressure measurement, filter and flap control, airflow control, cleanroom control, Lab/Fume hood control, airflow control...

Jeudi 26 octobre 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Generally, the temperature-sensitive wire is composed of steel wire insulated with a heat-sensitive material, the temperature sensing wire is commonly known as the "thermocouple", and there are many types, but hot runner thermocouple has two types: standard type J and type K. COLD RUNNER ...

Jeudi 26 octobre 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Automotive Window Frame Mould Automotive car window mould has many advantages including: 1. Reducing the modification times and shortening the development cycle; 2. Improving product quality, solving the product size issue until meeting the drawing requirements. As a custom plastic...

Jeudi 26 octobre 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Automotive Water Intake Manifold Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not require frequent changes to the mold and is versatile, but the disadvantage is that the nozzle needs to be modified and the single-use cost is high...

Jeudi 26 octobre 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Large drop of automotive mold top and bottom; The mold manufacturing technology is complicated; The injection system is many and complicated; The mold cost is ver high. AUTOMOTIVE MOLD TYPES Automotive AC Air Outlet The air outlets of automotive AC are generally assembled by multiple parts...

Jeudi 26 octobre 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Auto Parts Mould Automotive Parts Mold features: 1. The part material is made by PP-TD20 normally, the part surface will make leather texture which is very high, and he product surface is not allowed to have thimble marks, gate marks, sink marks, welding marks and flash or any other defects; 2...

Jeudi 26 octobre 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Plastic Pipe Mold The gas-assisted controller is used to control the pressure of nitrogen to the mold at different times, the controller is divided into a single air circuit, double air circuit, and four air circuits, each gas path during Gas-assisted injection mold moulding can...

Jeudi 26 octobre 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

Drip Tip Mold 2k Electronic Drip Tip Mold advantages: 1. It can be produced very precise products; 2. The injection molding cycle is short, suitable for large-volume products; 3. Good product consistency and low defect rate. As a mold manufacturer, we can offer sorts of overmolding...

Jeudi 26 octobre 2023

HIGH PRECISION WIRE&ROD BRANCH, specializes in ordinary brass rods & wires, lead brass rods &wires, lead free brass rods &wires, complex brass rods& wires, chromium zirconium brass, bronze rods& wines, copper rods &wires, as well as research and manufacture...

Jeudi 26 octobre 2023

Pure titanium wire, titanium alloy wire, titanium eyeglass wire (TB5 titanium wire), pressure vessel titanium welding wire, titanium straight wire, titanium coiled wire, titanium welding, titanium hanging wire, titanium bright wire, medical titanium wire (gr23/Gr5Eli titanium wire)...

Jeudi 26 octobre 2023

We provide custom made plastic parts-Sliders, inserts, lifters, blocks, ejector pins, and other mold components for our worldwide clients in 3 days via DHL or TNT. We are able to manufacture custom made plastic parts(Mold slider, lifters, Mold inserts, Core and cavity, blocks, ejector...)

Jeudi 26 octobre 2023

Packson provides our customers a various CNC machining services to our customers, including milling, turning, grinding, drilling and more. Our teams are able to manufacture custom aluminium parts via our precision manufacturing machine such as 3,4, and 5 axis CNC machining centers...

Jeudi 26 octobre 2023

Packson - Clean Room Injection Expert Packson specializes in delivering top-notch clean room manufacturing and assembly solutions tailored to meet the needs of medical device companies. Committed to adhering to the ISO 13485 standard, which is the gold standard for quality management...

Jeudi 26 octobre 2023

Packson - Medical Plastic Injection Molding Expert Packson sets itself apart from other medical injection molding companies through its distinguished ISO certification for medical injection molding services. Holding certifications for both ISO 13485: 2018 and ISO 9001: 2008, Packson...

Jeudi 26 octobre 2023

Packson is a contract manufacturer specializing in CNC Milling, CNC Turning, CNC Drilling services in China. We are able to manufacture plastic machining pieces and CNC machining metal parts with various materials. POM, ABS, HDPE, Nylon, PLA, PC, PEEK, PMMA, PP , PTFE , etc. Full...

Jeudi 26 octobre 2023

Multi-component molding is a highly efficient and cost-effective technology that enables the molding of custom plastic parts using two or three plastic resins or colors in a single operation, resulting in faster cycle times and flash-free products. As a leading expert in this technology...

Jeudi 26 octobre 2023

For more than 15 years, Packson Mold has become an excellent manufacturer that is enabled to make parts with high tonnage and large size thanks to our one-stop facility. We are keen to meet your injection molding needs with single and convenient sources. Thanks to our advanced equipment...

Jeudi 26 octobre 2023

In addition to providing moulding die design solutions, we can also provide customers with product design optimization solutions to save more cost and time during mold processing. With the continuous development of the company, our engineering department has been constantly optimizing...

Mercredi 25 octobre 2023

Fabric cleaning and disinfection machines are specialized devices used in healthcare and hospitality settings for cleaning and disinfecting fabrics that can harbor microorganisms that cause infections. These machines can clean and disinfect curtains, bed linens, towels, and other...

Mercredi 25 octobre 2023

Quantité : 30000 squa - Prix : 100-200RMB

As an outdoor heavy bamboo floor, it is manufactured using international cutting-edge biomimetic technology. Firstly, the bamboo raw materials are processed through 18 thinning processes to produce bamboo filaments with basically uniform morphology. Then, under high temperature conditions...

Mercredi 25 octobre 2023

Quantité : 30000 squa - Prix : 100-200RMB

Epoxy coil floor products using the most advanced technology and automation equipment production, product quality is stable, diversified varieties, and low carbon environmental protection. Compared with PVC floor, epoxy floor, etc., it has excellent performance, such as super pressure resistance...

Mercredi 25 octobre 2023

PA has good fluidity and is easy to overflow. It is suitable to use a self-locking nozzle and heat it. At the same time, due to the rapid condensation of the melt, it is necessary to prevent the material from blocking the nozzle, runner, gate, etc., causing insufficient products....

Mercredi 25 octobre 2023

BioHub SP single-use laboratory sample containers, laboratory sample bottles are designed for product sampling in cell culture and other processing. It can be used for sensitive liquids, buffers, media, etc. This lab sample bottle is a clean product after irradiation, which can be...

Mercredi 25 octobre 2023

Quantité : 20 sets/ye - Prix : 100,000-50 million

The main raw materials for smelting low-carbon ferrochromium using the electro silicothermic method include chromium ore, silicon chromium alloy, and lime. Some also come with fluorite and iron scales. Chromium ore should be a dry, clean lump or concentrate with a lump size of less than 50mm...

Mardi 24 octobre 2023

LIB xenon lamp aging test chamber can be used for aging tests such as color fastness and cracking of coatings, and can meet international standards such as ISO and ASTM.The xenon arc test chamber contains a variety of models to choose from small and large. There are a variety of xenon...

Mardi 24 octobre 2023

LIB Benchtop Environmental Chamber is a small desktop simulated temperature, temperature and humidity chamber. Placed on a stand for easy operation and space saving. This small temperature and humidity environmental chamber provides high performance in a compact size. Features and...

Mardi 24 octobre 2023

Quantité : 1 - Prix : 1,00 €

DESCRIPTION FUEL FILTER BRAND LiuGong TYPE GENUINE SUITABLE FOR LiuGong Crawler Excavator CLG970E OE REFERENCE NUMBER 40C5030 ORTEC provide the SDLG Parts, LGMG Parts, Sany Parts, LiuGong Parts, and all China brands Construction Equipment Parts, Loader Parts, Mining Truck Parts...

Mardi 24 octobre 2023

Quantité : 1 - Prix : 1,00 €

DESCRIPTION LUBE FILTER BRAND LIUGONG TYPE GENUINE SUITABLE FOR LiuGong Wheel Loader FILTERS FOR CLG856H OLD OE REFERENCE NUMBER 53C0053 MOQ 1 PCE CONDITION NEW ORTEC provide the SDLG Parts, LGMG Parts, Sany Parts, LiuGong Parts, and all China brands Construction Equipment Parts...

Samedi 21 octobre 2023

Hydraulic moulding press is the main equipment for compression molding. According to the frame structure, hydraulic plastic moulding machine is divided into frame structure and column structure. Specially designed for composite lightweight panels (such as various honeycomb sandwich panels)...

Samedi 21 octobre 2023

The one-step method is mainly used for the processing and production of film materials. After the mixed waste plastics are processed, they could be make into new final products directly from film materials without pelleting granulating. Double-station waste plastic extruder means...