ATTACHMENTS - 2019 Annonces

Vendredi 22 avril 2016

Quantité : 3000000000 - Prix : USD0.08/meter

Qingdao China manufacturing Paper Angle Protector can 100% recyclable Quick Info of Paper Corner Protector paper corner protector paper corner board corner paper paper corner edge protector paper corner guard paper corner pallet paper protecting corner paper angle board paper angle...

Jeudi 21 avril 2016

Quantité : 999

Polarization Rotator offer 45deg or 90deg rotation at a number of common laser wavelength, the optical axis in a polarization rotator is perpendicular to the polished face of the optic. The result is that the orientation of in put linearly polarized light is rotated as it propagates...

Jeudi 21 avril 2016

Quantité : 999

This type of zero order waveplate is constructed of a true zero order waveplate and a BK7 substrate.As the waveplate is very thin and easy to be damaged,the Bk7 plate's function is to strengthen the waveplate. • Cemented by Epoxy • Wide Angle Acceptance • Better Temperature Bandwidth...

Jeudi 21 avril 2016

Quantité : 999

This type of zero order waveplate is designed for high damage threshold applocation (more than 1GW/cm2). As the plate is very thin, it's easy to break during operation. • Single Plate • Wide Angle Acceptance • Better Temperature Bandwidth • Wide Wavelength Bandwidth • High Damage...

Jeudi 21 avril 2016

Quantité : 999

Dual wavelength waveplate is a multiple waveplate that provide a specitfic retardance at two different wavelengths, it's particularly useful when used in conjunction with other polarization sensitive components to separate coaxial laser beams of different wavelength. Email now: sales@crysmit...

Jeudi 21 avril 2016

Quantité : 999

Zero order waveplate shows better performances than multiple order waveplates, it has broad bandwidth and a lower sensitivity to temperature and wavlenght changes. Email now: sales@crysmit.com Attribute Specification Material Quartz Typical Diameter (Φmm) 10.0, 12.7, 15.0, 20...

Jeudi 21 avril 2016

Quantité : 999

The low (multiple) order waveplate is designed to give a retardance of several full waves, plus the desired fraction. This result in a single, physically robust component with desired performance. However, even small changed in wavelength or temperature will result in significant...

Jeudi 21 avril 2016

Quantité : 999

Polarizing Cube Beamsplitters split randomly polarized beams into two orthogonal,linearly,polarized components-S-polarized light is reflected at a 90deg.Angle while P-polarized light is transmitted.Each beamsplitter consists of a pair of precision high tolerance right angle prisms...

Jeudi 21 avril 2016

Quantité : 999

Rochon polarizer is one of the earliest designs, which is made of two birefringent material prisms cemented together. Both ordinary and extraordinary beams propagate collinearly down the optic axis in the first prism under the ordinary refractive index. Upon entering the second prism...

Jeudi 21 avril 2016

Quantité : 999

Wollaston polarizer is made of two birefringent material prisms that are cemented together. The deviations of the ordinary and extraordinary beams are nearly symmetrical about the input beam axis, so that the Wollaston polarizing beam splitter has approximately twice the deviation of the Rochon...

Jeudi 21 avril 2016

Quantité : 999

Glan Thompson polarizer is made of two calcite prisms or a -BBO prisms cemented together. Two types of Glan Thompsons are available. One is the standard form and the other is the long form. Their length to aperture ratios are 2.5 : 1 and 3.0 : 1 respectively. Glan Thompsons tend...

Jeudi 21 avril 2016

Quantité : 999

Glan Laser prism polarizer is made of two same birefringent material prisms that are assembled with an air space. The polarizer is a modification of the Glan Taylor type and is designed to have less reflection loss at the prism junction. The polarizer with two escape windows allow...

Jeudi 21 avril 2016

Quantité : 999

Glan Taylor prism polarizer is made of two same birefringent material prisms that are assembled with an air space. It has a length to aperture ratio less than 1.0 makes it a relatively thin polarizer. The polarizer with no side escape windows are suitable for low to medium power...

Jeudi 21 avril 2016

Quantité : 999

TGG is an excellent magneto-optical crystal used in various Faraday devices (Rotator and Isolator) in the range of 400nm-1100nm, excluding 475-500nm. • Main Advantage： • Large Verdet Constant (35 Rad T-1m-1). • Low optical losses (<0.1%/cm)<br /> • High thermal conductivity (7...)

Jeudi 21 avril 2016

Quantité : 999

BBO crystal has a broad transmission range from 210nm to 2000nm. Compared with DKDP and LiNbO3 crystal, BBO crystal performs better in high power handling because of its good shutoff switching properties although it has a small electro-optic coefficient. It's ideal for application...

Jeudi 21 avril 2016

Quantité : 999

Magnesium Fluoride (MgF2) is good birefringent crystal with good transmission over 120-7000nm. It is a hard material which is resistant to thermal and mechanical shock and can be worked according to the highest standards. MgF2 single crystals is a positive birefringent crystal and...

Jeudi 21 avril 2016

Quantité : 999

Calcite is a negative uniaxial crystal that has high birefringence, wide spectral transmission and availability in reasonably sized rhombs.Although is a fairly soft crystal and is easily scratched, it is ideal material used as visible and near IR polarizers, such as Glan Thompson...

Jeudi 21 avril 2016

Quantité : 999

Description: Titanium Doped Sapphire Crystal (Ti: Sapphire, Ti: Al2O3), is the most widely used laser crystal for widely tunable and ultrashort pulsed lasers with high gain and high power outputs. Applications: • The tunable wavelengths that cover a broad range from 700 to 1000 nm make Ti...

Jeudi 21 avril 2016

Quantité : 999

Nd: YVO4 crystal is one of the most efficient laser host crystal currently existing for diode laser pumped solid state lasers. Its large stimulated emission cross-section at lasing wavelength, high absorption coefficient and wide absorption bandwidth at pump wavelength, high laser...

Jeudi 21 avril 2016

Quantité : 999

Nd: YAG (neodymium-doped yttrium aluminium garnet; Nd: Y3Al5O12) is a crystal that is used as a lasing medium for solid-state lasers. The dopant, triply ionized neodymium, typically replaces yttrium in the crystal structure of the yttrium aluminium garnet (YAG), since they are of similar size...

Jeudi 21 avril 2016

Quantité : 999

Lithium Niobate(LiNbO3) Crystal is widely used as frequency doublers for wavelength >1um and optical parametric oscillators (OPO) pumped at 1064 nm as well as quasi-phase-matched (QPM) devices. Due to its large Electro-Optic(E-O) and Acousto-Optic(A-O) coefficients, LiNbO3 is...

Jeudi 21 avril 2016

Quantité : 999

Lithium Triborate (LiB3O5 or LBO) is an attractive nonlinear optical (NLO) crystal which widely used for harmonic generation of high-intensity laser radiation. Crysmit offers • Maximum processing size 30x30x30 mm3 • Maximum processing Length 60mm • A large quantity of crystal in stock...

Jeudi 21 avril 2016

Quantité : 999

Beta-BaB2O4(BBO) is a nonlinear optical crystal which combines a number of unique features.Wide transparency and phase matching ranges, large nonlinear coefficient, high damage threshold and excellent optical homogeneity provide attractive possibilities for various nonlinear optical...

Jeudi 21 avril 2016

Quantité : 999

ZnS is often used in the 8 to 12 microns region. Its high resistance to rain erosion and high-speed dust and particulate abrasion makes it particularly suitable for exterior IR windows on aircraft frames. ZnS has a lower cost relative to ZnSe and ZnS MS, and has potential wherever...

Jeudi 21 avril 2016

Quantité : 999

Zinc Selenide (ZnSe) is a preferred material for lenses, windows, output couplers and beam expanders for its low absorptivity at infrared wavelengths and its visible transmission. For high-power applications, it's critical that the material bulk absorption and internal defect structure...

Jeudi 21 avril 2016

Quantité : 999

Germanium has the highest index of refraction of any commonly used infrared transmitting materials. Germanium(Ge) based optical components are widely used for IR applications. Its blocks UV and visible light and in the infrared up to about 2µm. Ge based optical components include mirrors...

Jeudi 21 avril 2016

Quantité : 999

Silicon is commonly used as a substrate material for infrared reflectors and windows in the 1.5 μ m-8 μ m region. The strong absorption band at 9 μ m makes it unsuitable for CO2 laser transmission applications but it is frequently used for laser mirrors because of its high thermal...

Jeudi 21 avril 2016

Quantité : 999

Due to its selective absorption in visible wavelength range, color glass filter will exhibit various color depending the glass type. Color glass filter provides an economical filter for various applications. Optical glass filters are widely used in safetyglasses, industrial measurement...

Jeudi 21 avril 2016

Quantité : 999

Polarization Beamsplitter Cube are constructed by cementing two precision right angle prism together with appropriate interference coating on the hypotenuse surface. The absorption loss to the coating is minimal transmission and reflection approach 50% (average) though output is...

Jeudi 21 avril 2016

Quantité : 999

Corner Cube Retro Reflector operates on the principle of Total Internal Reflection (TIR). An incident beam will be reflected parallel to itself by the three roof surfaces. The reflection is insensitive to the incident angle, even when the incident beam enters the prism off normal axis...