CODE - 4284 Annonces

Samedi 20 août 2022

Quantité : 30pcs

Uses of linear cutter surgical stapler Instruction for Use The disposable linear cutter stapler places two double staggered rows of titanium staples, cuts and divides tissue between the two double rows simultaneously. The disposable linear stapler should not be used on the tissues...

Samedi 20 août 2022

Quantité : 30pcs

endoscope and cannula use & Irrigation Cannula Instruction for Use The Single Use Laparoscopic Suction & Irrigation Cannula is designed to be used in the Minimally Invasive Surgery (MIS) procedures as multi-purpose operation tool with suction and irrigation capabilities...

Samedi 20 août 2022

Quantité : 30pcs

Instruction for Use The Single Use Laparoscopic Bladeless Trocar is designed to be used in the Minimally Invasive Surgery (MIS) to puncture the abdominal wall for creating the working tunnels and maintain the pneumoperitoneum during the surgeries. The disposable endoscopic trocar...

Vendredi 19 août 2022

Prix : 112,00 €

PHD20-2260-01 New print head For datamax M-4206 4208 4212 4210 barcode printer thermal print head PHD20-2261-01 Datamax M-4206 Mark II 203dpi 4 inch thermal printhead P/N PHD20-2261-01 100% original Kyocera compatible printhead Genuine Printhead for Datamax M-4206 M-4208 Thermal Printer...

Vendredi 19 août 2022

Quantité : 450 - Prix : 128,00 €

I-4308 I-4310E PHD20-2279-01 Genuine/original/compatible/replaceable barcode thermal printer Printhead DATAMAX I-4310e Mark II 300dpi 4'' print head P/N PHD20-2279-01 Print head Kyocera Thermal printhead Factory Direct New Original Printhead for Datamax-O'Neil I-4310E Mark II Thermal...

Mercredi 17 août 2022

Prix : 100USD

The static torque measurement sensor is a sensor used to measure the torque value of discontinuous rotation. We provide 4 kinds of static torque transducers with different installation methods for customers to choose from. Suitable for valves, torque wrenches, and torque testing equipment...

Mercredi 17 août 2022

Prix : 100USD

Many industrial products are exposed to several atmospherical agents in addition to the well-known temperature, humidity and corrosion. Very high degradation phenomena are caused by sand, dust and rain. In particular, many electrical components have to be permanently water- tight...

Mardi 16 août 2022

POE PA system uses the existing Ethernet cat-5 wiring to transmit data signals for some IP based terminals (such as IP network broadcast system terminals, speakers, speakers, etc.) and also provides DC power supply technology for such devices. The wiring cost and power loss can be...

Mardi 16 août 2022

Paperless Conference System Features ● Screen Size ： 7.5inch*2 ● Communication Protocol：ZigBee 2.4G Protocol/BLE Bluetooth v4.2 ● Operating Voltage：3.1-3.3V ● Transmission distance：Normally radius of 35 meters （100 meters in open area） ● Resolution：800*480px ● Display type：Electronic...

Samedi 13 août 2022

MF200 with Lunar Dial and Health Guard technology gives the consumer not only convenient operation experience but also health guarantee. The Turbo Wash helps to speed up the washing cycle, saving up to 40% of wash time whilst maintaining the same great performance. With the Midea Lunar Series...

Samedi 13 août 2022

Midea MF100 is specially designed with a ultra-silm figure, which is only 400mm in depth and perfectly fits espcailly limited space. Multiple washing options have been set to fulfill your requirements under different scenarios. Hygiene 90℃ wash removes hazardous substance while cold...

Vendredi 12 août 2022

Double heads CNC EDM has two separated spindles and controllers, travel of table is much bigger than regular big EDM machines, each head can do machining on its own. DMNC's large EDM machine is much heavier. A1470 Double Heads CNC EDM Die Sinker A1880 Double Heads CNC RAM EDM Machine...

Vendredi 12 août 2022

CNC EDM combines with robot, CMM, electrode and workpiece store station, and CNC high speed milling center to realize fully automatic production. DMNC provides a complete solution, and that's the CNC EDM automatic spark erosion machine. ADV400 CNC Spark EDM Machine With Automatic...

Vendredi 12 août 2022

Quantité : 50000-8000 - Prix : 8-15USD

FISH series are tension clamps for FTTH drop clamp. Fish clamp for FTTH cable can be used in anchoring, turning, suspension fiber optic cable routes. Without suspension wire (in case of fiber optics diameter is 3.3mm*2.0mm): 2turns. With suspension wire (in case of fiber optics diameter is 5...)

Vendredi 12 août 2022

Quantité : 50000-8000 - Prix : 8-15USD

FISH-02 series drop flat cable clamps are tension clamps for FTTH drop cable. Fish FTTH fiber optic clamps, can be used in anchoring, turning, suspension optical fiber cable routes. Without suspension wire (in case of fiber optics diameter is 3.3mm*2.0mm): 2turns. With suspension...

Vendredi 12 août 2022

Quantité : 1000

The cooling and heating integrated machines are equipped with cold water and hot water channels, which can adapt to the different high and low-temperature requirements of the front and rear molds. The low-temperature channel is 5~35℃, and the high-temperature channel is 35~120℃. Features...

Vendredi 12 août 2022

Quantité : 1500000 pc - Prix : 200-2000

Ebike Mid Motor Ebike Mid Motor Mid ebike motor china is mounted on the frame where the pedal crank is. Mid motor are far more complex than hub motors, which also cost too much. Read More  Ebike Rear Motor Ebike Rear Motor All the weight is on the motor, which provides maximum traction...

Jeudi 11 août 2022

Quantité : 500000 - Prix : 1,00 €

Self-Locking Nylon Cable Ties Type: Self-locking nylon cable tie Material: UL approved Nylon 66, UL 94V-2. Work temp: -35°C to 85°C. Sizes: Tensile Strength: 2.5mm: 18LBS and 8KGS, 3.6mm: 40LBS and 18KGS, 4.8mm: 50LBS and 22KGS, 7.6mm: 120LBS and 55KGS, 9.0mm: 175LBS and 79.4KGS Feature...

Jeudi 11 août 2022

Quantité : 500000 - Prix : 1,00 €

Playground Cable Ties/In-Line Cable Ties Materials: Nylon 66 94V-2 certificated by UL. Heat-resisting, erosion control, insulate well and not apt to age. Colors: Natural, UV black and other colors are available as requested. Operating temperature: -35 to 85 Features: Fixed and flexible...

Jeudi 11 août 2022

Quantité : 500000 - Prix : 1,00 €

Chassis Cable Ties Materials: Nylon 66 Features: Both sides of the cable tie serrated,with round head for larger bearing area,Tensioning with application tool Application: Using a single hole these 'chassis ties' are widely used in the automotive, truck and heavy equipment markets...

Jeudi 11 août 2022

Quantité : 500000 - Prix : 1,00 €

Cable Clips Material: PP,Steel nail. Features: Fixable, good elasticity and shock resisting. Inserting type, nail attached in clips. Save time and cost. Model: Circle cable clips, square cable clips,coaxial cable clips Colors: white,black, grey Sizes: Pls contact us directly to get...

Jeudi 11 août 2022

Quantité : 500000 - Prix : 1,00 €

2.5x80 Nylon Cable Ties Type: Self-locking nylon cable tie Material: UL approved Nylon 66, UL 94V-2. Work temp: -35°C to 85°C. Sizes: Tensile Strength: 2.5mm: 18LBS and 8KGS, 3.6mm: 40LBS and 18KGS, 4.8mm: 50LBS and 22KGS, 7.6mm: 120LBS and 55KGS, 9.0mm: 175LBS and 79.4KGS Feature...

Jeudi 11 août 2022

Quantité : 500000 - Prix : 1,00 €

2.5x150 Nylon Cable Ties Type: Self-locking nylon cable tie Material: UL approved Nylon 66, UL 94V-2. Work temp: -35°C to 85°C. Sizes: Tensile Strength: 2.5mm: 18LBS and 8KGS, 3.6mm: 40LBS and 18KGS, 4.8mm: 50LBS and 22KGS, 7.6mm: 120LBS and 55KGS, 9.0mm: 175LBS and 79.4KGS Feature...

Jeudi 11 août 2022

Quantité : 500000 - Prix : 1,00 €

3.6x150 Nylon Cable Ties Type: Self-locking nylon cable tie Material: UL approved Nylon 66, UL 94V-2. Work temp: -35°C to 85°C. Sizes: Tensile Strength: 2.5mm: 18LBS and 8KGS, 3.6mm: 40LBS and 18KGS, 4.8mm: 50LBS and 22KGS, 7.6mm: 120LBS and 55KGS, 9.0mm: 175LBS and 79.4KGS Feature...

Jeudi 11 août 2022

Quantité : 500000 - Prix : 1,00 €

3.6x200 Nylon Cable Ties Type: Self-locking nylon cable tie Material: UL approved Nylon 66, UL 94V-2. Work temp: -35°C to 85°C. Sizes: Tensile Strength: 2.5mm: 18LBS and 8KGS, 3.6mm: 40LBS and 18KGS, 4.8mm: 50LBS and 22KGS, 7.6mm: 120LBS and 55KGS, 9.0mm: 175LBS and 79.4KGS Feature...

Jeudi 11 août 2022

3.6x250 Nylon Cable Ties Type: Self-locking nylon cable tie Material: UL approved Nylon 66, UL 94V-2. Work temp: -35°C to 85°C. Sizes: Tensile Strength: 2.5mm: 18LBS and 8KGS, 3.6mm: 40LBS and 18KGS, 4.8mm: 50LBS and 22KGS, 7.6mm: 120LBS and 55KGS, 9.0mm: 175LBS and 79.4KGS Feature...

Jeudi 11 août 2022

Quantité : 500000 - Prix : 1,00 €

7.6x300 Nylon Cable Ties Type: Self-locking nylon cable tie Material: UL approved Nylon 66, UL 94V-2. Work temp: -35°C to 85°C. Sizes: Tensile Strength: 2.5mm: 18LBS and 8KGS, 3.6mm: 40LBS and 18KGS, 4.8mm: 50LBS and 22KGS, 7.6mm: 120LBS and 55KGS, 9.0mm: 175LBS and 79.4KGS Feature...

Jeudi 11 août 2022

Quantité : 500000 - Prix : 1,00 €

4.8x200 Nylon Cable Ties Type: Self-locking nylon cable tie Material: UL approved Nylon 66, UL 94V-2. Work temp: -35°C to 85°C. Sizes: Tensile Strength: 2.5mm: 18LBS and 8KGS, 3.6mm: 40LBS and 18KGS, 4.8mm: 50LBS and 22KGS, 7.6mm: 120LBS and 55KGS, 9.0mm: 175LBS and 79.4KGS Feature...

Jeudi 11 août 2022

Quantité : 500000 - Prix : 1,00 €

7.6x500 Nylon Cable Ties Type: Self-locking nylon cable tie Material: UL approved Nylon 66, UL 94V-2. Work temp: -35°C to 85°C. Sizes: Tensile Strength: 2.5mm: 18LBS and 8KGS, 3.6mm: 40LBS and 18KGS, 4.8mm: 50LBS and 22KGS, 7.6mm: 120LBS and 55KGS, 9.0mm: 175LBS and 79.4KGS Feature...

Jeudi 11 août 2022

Quantité : 500000 - Prix : 1,00 €

4.8x300 Nylon Cable Ties Type: Self-locking nylon cable tie Material: UL approved Nylon 66, UL 94V-2. Work temp: -35°C to 85°C. Sizes: Tensile Strength: 2.5mm: 18LBS and 8KGS, 3.6mm: 40LBS and 18KGS, 4.8mm: 50LBS and 22KGS, 7.6mm: 120LBS and 55KGS, 9.0mm: 175LBS and 79.4KGS Feature...