SPECIFICATIONS - 29915 Annonces

Mercredi 28 avril 2021

Guide Shoes are attached to the lowermost end of the casing string to provide a low-cost method of enabling the casing to pass ledges or obstructions in the well-bore, which aids bit re-entry. The cement guide shoe may be used in combination with any type of collar. It efficiently...

Mercredi 28 avril 2021

Wellhead and Christmas tree is used for well drilling and oil or gas production, water injection and downhole operation. wellhead and christmas tree is installed on the top of a well to seal the annular space between casing and tubing, can control wellhead pressure and adjust well...

Mercredi 28 avril 2021

The fracturing tree (frac tree) is a piece of wellhead equipment used to direct and control oil & gas from the well. It is an assembly of valves, spools, and fittings used for an oil well, gas well, water injection well, water disposal well, gas injection well, condensate well...

Mercredi 28 avril 2021

Saigao Float Collar is supplied with plunger valve in most of the application. A non metallic Valve encased and held in place with a high pressure cement mixture. This design ensure the valve the maximum circulation rate in vertical, horizontal and deviational wells. Material used...

Mardi 27 avril 2021

Pump parts A pump is a machine for conveying or pressurizing a fluid. It transfers the mechanical energy or other external energy of the prime mover to the liquid, so that the liquid energy increases. Pump is mainly used to transport water, oil, acid and alkali liquid, emulsion, suspended...

Mardi 27 avril 2021

Overview of Oil Pump Housing The influence of automobile oil pump is to suck the gasoline out of the tank, through the pipeline and the gasoline filter pressure to the carburetor float room, so that the vehicle motor has enough power to start,so as to start the vehicle. Because of...

Mardi 27 avril 2021

Description of Food Grade CMC Sodium carboxymethyl cellulose (CMC/cellulose gum) is a kind of cellulose ether, can easily soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products. The main raw material of CMC is refined cotton...

Mardi 27 avril 2021

CMC can be used in the ceramic body as a reinforcer, excipient, and plasticizer. It can facilitate body shaping, CMC can also be used in glazing pulp and fancy glaze plays a role of thickening, binding, and dispersion. It can raise surface tension of the glaze pulp. It can stabilize...

Mardi 27 avril 2021

Sodium carboxymethyl cellulose (Na-CMC or cellulose gum) is the most widely used and most frequently used type of anionic cellulose ether. It is a white fibrous or granulated powder. Odorless, tasteless, non-toxic, hygroscopic, easily soluble in both hot and cold water, obtained...

Mardi 27 avril 2021

Prix : 100USD

The Model 178 Series variable pressure sensor are low range differential pressure transmitters. Each unit features a push-activated ZERO function and an associated LCD display. With a convenient push button, the zero calibration can be performed without any additional equipment. It...

Mardi 27 avril 2021

Prix : 100USD

The model 178A Series pressure monitors are low-range differential pressure transmitters. Each unit features a push-activated ZERO function and an associated LCD display. With a convenient push button, the zero calibration can be performed without any additional equipment. It significantly...

Mardi 27 avril 2021

Our company, Hangzhou Roll Forming Technology Co., Ltd, is a China stainless steel tube mill manufacturer and tube mill manufacturer. Trapezoidal Profile Roofing Sheet Making Machine Introduction This machine is used to make trapezoidal profile panels. A trapezoidal roof profile...

Mardi 27 avril 2021

Semi-Automatic cz purlin machine for Sale uses the same set of equipment to produce various specifications of C/Z purlin through semi-automatic simple stepless adjustment, without changing the forming rollers when changing specifications. If want to change C to Z(Z to C), need to...

Lundi 26 avril 2021

Quantité : 50 units p - Prix : 10,000-500,000

Explore More HF Industrial Belt Welders Products Industrial Belt Baffle Skirt High Frequency Welder Product DescriptionUsed for industrial belt skirt and belt baffles welding , welding industrial conveyor belt conveyor bel, joint, cutting, slitting, conducting bar, package edge...

Lundi 26 avril 2021

Powerful tool in precision positioning with a backlash of less than 0°03' Reduction Ratio of this planetary gear shaft: 1/3-1/100 Backlash: 0.05° (within 3 min) Main features of LFB series Concentric Shaft Planetary Gear Reducer Backlash is within 3 min-perfect solution for precision...

Lundi 26 avril 2021

The LSS series of micro harmonic reducers can be divided into two models depending on the different used harmonic waveform generator: LSS-I (uni-body type wave generator) and LSS-II (cross slider type wave generator). We provide 6 different sizes with 5 kinds of speed reduction...

Lundi 26 avril 2021

Prix : 400 USD

The LSD series is a newly developed strain wave gear/drive series based on the LSS series to fulfil the needs of the market. This type of mini harmonic drive only uses a uni-body type wave generator. Compared with the LSS series, the LSD strain wave gearbox is more compact and thin-walled...

Lundi 26 avril 2021

Prix : 400USD

The LHT Series of hollow output shaft gearboxes use hat type flex spline. We can divide the LHT drive actuators into 5 versions, LHT-I, LHT-II, LHT-III, LHT-IV and LHT-V. Differences Among Different LHT Hollow Shaft Gearbox: LHT-I: use uni-body type wave generator LHT-II: cross...

Lundi 26 avril 2021

Prix : 400USD

LFS series- this harmonic actuator is a combination product that is lightweight, ultra-flat. It uses cross-roller bearing. LFS integrated series-Combined harmonic reducer with high performance and small motor, with highest input characteristics under the same gear conditions. Applications...

Lundi 26 avril 2021

This automatic vision screen printer is the latest release of our printer. It features the latest machine vision recognition system, adopting highly precise servo motion control to achieve high speed and high accuracy pattern matching. With a core cycle time below 8.5 seconds, our...

Lundi 26 avril 2021

The electric smt feeders is mainly suitable for the Trosntol A1 automatic pick and place machine. This kind of pick and place feeder only needs electricity to feed, which is more stable than the traditional pneumatic feeder. It makes the placement effect preciser. It is mainly used in type ...

Lundi 26 avril 2021

Automatic Pick and Place Machine TronStol A1 is the latest high-precision laser flying mounter developed by our company, which can stably and efficiently mount high-precision components such as 0201 and BGA. Compared with a semi automatic SMT pick and place machine, this automatic...

Lundi 26 avril 2021

Semi Automatic Pick And Place Machine This kind of pick and place machine features a dual head, 25 feeder slots, a vision system, and a flexible positioning system. The manual SMT pick and place machine is suitable for prototyping and small-batch production with stable performance and low cost...

Lundi 26 avril 2021

This kind of SMT pick and place machine features a dual head, 46 feeder slots, vision system, and flexible positioning system. The desktop smt pick and place machine is suitable for prototyping, small batch production with stable performance, and affordable price. Specification of...

Lundi 26 avril 2021

Quantité : 1 - Prix : 0,10 €

Medical disposable use ureteral access sheath for urology ​ It is used for the establishment of surgical pathway for endoscopic surgery in Department of Urology. It helps endoscopy or other instruments to enter the urinary tract and provides a channel of continuous operation. And...

Lundi 26 avril 2021

Quantité : 1 - Prix : 0,10 €

Disposable Pressure Extension Lines/tube for medical disposable devices ​ The PVC tube/catheter of Lonyi uses medical grade PVC raw material and be extruded in the 10000/100000 level cleaning workshop. The size, color and structure can be made in accordance with the requirements of the customers...

Lundi 26 avril 2021

Quantité : 1 - Prix : 0,10 €

Disposable medical use ureteral stent for Urology ​ Ureteral stent (double pigtail catheter, or double J stent), is widely used in department of urology surgery. It is suitable for renal calculi, ureteral calculi, hydronephrosis, renal transplantation, renal and ureteral benign tumors...

Lundi 26 avril 2021

Quantité : 500000 PCS - Prix : 2000$

Food preservation bag is made of food-grade PP materials, which are mainly used for food sealing and preservation. They are popular with consumers because of their convenient use, cleanliness, and lasting preservation. Soton insists on strictly controlling every production process...

Lundi 26 avril 2021

Quantité : 500000 PCS - Prix : 2000$

Disposable PE gloves are new products developed by Soton this year, which are perfect for housework, food processing, kitchen cooking, barbecue catering, personal care, etc. Disposable PLA gloves are biodegradable. among our biodegradable disposable gloves, different thicknesses...

Lundi 26 avril 2021

Quantité : 500000 PCS - Prix : 2000$

CPLA cutlery is the most popular tableware in recent years. PLA is a new type of biodegradable material, and CPLA has achieved the characteristics of high-temperature resistance on the basis of ensuring environmentally friendly and biodegradable. This type of biodegradable utensils...