WELDING - 3923 Annonces

Mardi 02 août 2022

Quantité : 9000 - Prix : USD10-USD1000000

The nihon spindle drift eliminator is composed of sine wave blades. Its function is to separate the droplets in the air flow. It can not only reduce the drift rate, but also be regarded as an effective dust screen. It can protect the spray system from sunlight and dust pollution....

Samedi 30 juillet 2022

China reflow soldering technology is widely used in the field of electronic manufacturing. The components on the various boards used in our computers are soldered to the circuit board through this process. This PCB china reflow oven machine has a heating circuit inside to heat air or nitrogen...

Jeudi 28 juillet 2022

RFL-C30000XZ The Multi-module CW Fiber Lasers developed by Raycus ranges from 3,000W to 30kW, with high electro-optical conversion efficiency, high light beam quality, high energy density, wide modulation frequency, high reliability, long service life, maintenance-free operation and advantages...

Jeudi 28 juillet 2022

RFL-A200D Medium powered fiber delivered direct diode laser is mainly used for heat conduction welding with low material thickness. With heat conduction welding, the laser melts the sheets along the intended joint. The melts of the joint partners merge together and then cool off to...

Jeudi 28 juillet 2022

RFL-C2000 It has the advantages of high electro-optical conversion efficiency, good beam quality, high energy density, wide modulation frequency, strong reliability, long life, and maintenance-free operation. It can be widely used in welding, precision cutting, cladding, surface treatment...

Jeudi 28 juillet 2022

RFL-C20000TZ The Multi-module CW Fiber Lasers developed by Raycus ranges from 3,000W to 30kW, with high electro-optical conversion efficiency, high light beam quality, high energy density, wide modulation frequency, high reliability, long service life, maintenance-free operation and advantages...

Jeudi 28 juillet 2022

Treated Steel 304L Strips have high sturdiness, and they can undoubtedly endure high-temperature conditions. We keep up with the quality and standard of Coils. It is utilized for various applications in various businesses and, for the most part, utilized in a cool climate. Stainless...

Jeudi 28 juillet 2022

The inner thermal insulation material of the industrial double door is made of rigid polyurethane or foam. The thickness of the door is generally 50, 75, 100mm. The surrounding rubber seals are highly oil-proof, wind-proof and anti-aging. They can be assembled and replaced without special tools...

Mercredi 27 juillet 2022

Quantité : 10000 - Prix : 130,00 €

Teflon PTFE cassette cleaning flower basket customized The use of teflon carrier (cleaning flower basket): Photovoltaic, semiconductor, solar energy and other industries, cleaning of silicon wafers, wafers, glass, LCD screens, cells, etc., as well as the bearing of corrosion equipment...

Mercredi 27 juillet 2022

Quantité : 1000 - Prix : 80,00 €

PFA microcolumns, also known as isotope ion exchange columns, are specially designed for isotope ion exchange, with different capacities, pipe diameters and lengths to meet the different needs of customers. This product is cast with PFA material, designed to meet your needs by combining...

Vendredi 22 juillet 2022

Quantité : 10000 Piec - Prix : 150USD-10000USD

GREAT has customized manufacture several types of roller bit. Our roller cone drill bit includes the 90 ° U-shaped Roller Bit series and the 120 ° U-shaped Roller Bit series. All these two types have designed Starry Sky Roller Bit. The cones are designed with more full insert than...

Vendredi 22 juillet 2022

Quantité : 10000 Piec - Prix : 150USD-10000USD

Overview of Rock Reamer Hole Opener The Rock reamer produced by GREAT company is used to expand the diameter of the pilot hole and is mainly used for horizontal directional drilling of oil, natural gas, electric power, and other pipelines. The Rock reamer is designed for reaming a...

Mercredi 20 juillet 2022

Ground engaging tools definition: Ground Engaging Tools (G.E.T) are wear parts with high impact and high abrasion resistance ability. High-performance wear parts optimize your productivity and protect your bottom line. WALKSON, as a reputable ground engaging tools supplier and manufacturer...

Mercredi 20 juillet 2022

The unique, formable design of Chocky wear bars and wear button are available in various lengths, grades and sizes and can also be customized as per the client's specific need. Applications for Chocky Bars are wide and varied, ranging from specific wear protection on buckets for loaders...

Mardi 19 juillet 2022

VL series vertical machining center is a small and medium-sized vertical machining center designed by Germany and made in China. It mainly aims at the milling of automobile aluminum hubs, completing drilling, complex surface machining, and other processes; This product can also be...

Mardi 19 juillet 2022

In the process of swing bearing,slewing bearing use, it will endure 3 different direction force, including the axial force Fa, the radial force Fr and the overturning moment M. The combination of the three loads will change as a result of different working ways and different structural...

Vendredi 15 juillet 2022

Quantité : Per Order - Prix : $0.1-$200

The brass ball valves for water is evolved from the cock. Its opening and closing part is used as a sphere, which uses the sphere to rotate 90° around the axis of the valve stem to achieve the purpose of opening and closing. The ball brass valve can cut off, distribute and change...

Vendredi 15 juillet 2022

Aluminum sheet 5083 belongs to Al-Mg series alloy. It is the highest strength corrosion-resistant alloy among practical non-heat-treated alloys. And It is suitable for welding structures. In addition, it is worth mentioning that the 5083 aluminum sheet has good resistance to seawater...

Vendredi 15 juillet 2022

Aluminum Coil for Sale The 5052 aluminum coil is an Al-Mg alloy and also contains a small number of elements such as manganese, chromium, and zinc. With the exception of a small part of the manganese component in the alloy, most of the manganese will form MnAl6, which can improve...

Vendredi 15 juillet 2022

Safety pattern pressure gauge which is designed for harsh and corrosive environmental conditions. There is Burst disk pressure in the gauge, blow out hole in the back to relief the presure inside caused by failure of elastic element. The All Stainless Steel Pressure Gauge has an internal...

Vendredi 15 juillet 2022

2 inch pressure gauge which is designed for the medical system, oil fress for the oxygen gauge, pressure higher to 6000psi, material stainless steel or brass available for choose. 2 Inch Diameter Medical Bottom Connection 15lpm Pressure Gauge 2 inch, bottom connection 15lpm pressure scale...

Vendredi 15 juillet 2022

2 inch high pressure 4000psi gauge chromed connection with back connector. Specifications of 2 Inch Medical High Pressure 4000psi Chromed Thread Bottom Gauge Dial 1.5”,2”,2.5”,3”,4″,6”,8",10"(40mm,50mm,6) mm,75mm,100mm,150mm,200mm,250mm) Scale ranges -1/600bar Accuracy class 1...

Vendredi 15 juillet 2022

Quantité : 12000 tons - Prix : $2.5/kg-6.8/kg

The anti-corrosion paint is used for the inner wall of the oil tank. The basic function is to protect the steel oil tank from corrosion, protect the oil from pollution, and prevent static electricity. Epoxy resin is the base material, It is composed of special conductive material...

Vendredi 15 juillet 2022

An expert in pipe cutting with intelligent, digital, European quality. Smart Fiber Laser Metal Tube Cutting Machine With the popularization of the "Industry 4.0" concept, GoldenLaser's intelligent CNC smart laser cutting machine P2060A has been fully automated. By integrating information...

Vendredi 15 juillet 2022

Overview of Heavy Duty Tube Laser Cutting Machine Large tube laser cutting uses a focused high-power-density laser beam to irradiate the workpiece, so that the irradiated material quickly melts, vaporizes, ablates, or reaches the ignition point while blowing away the molten material...

Vendredi 15 juillet 2022

Quantité : 1000，000pc - Prix : 1-1000USD

EXOR Heavy Duty Car Battery EXOR heavy duty diesel car batteries series adopts world-class advanced fully automatic production line, realizing high stability and consistency and longer use life. The combination of grid production technology, high tensile strength construction design...

Jeudi 14 juillet 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

Extruded aluminum square tube is frequently used in the places where lightweight and corrosion resistance is important, such as framework, support columns, gates and fencing, handrails and protective barriers. In Otalum, we offer a wide range of square aluminium profile with a variety...

Jeudi 14 juillet 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

Aluminium round tube or aluminum round pipe is used in a lot of structural applications. It is also popular in the transportation industry (like bicycle frames) due to its lightweight. It is measured by initially taking the outside diameter and then the wall thickness. In Otalum...

Jeudi 14 juillet 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

Aluminium alloy round bar is frequently used in the transportation, construction and aviation industries due to its excellent strength to weight ratio. In Otalum, we offer a wide range of extruded hollow bar with a variety of alloys, sizes and finishes. Our solid aluminum round bar...

Jeudi 14 juillet 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

Aluminium rectangle tube is frequently used in places where lightweight and corrosion resistance is important. Thus, similar to the aluminium profile square tube, aluminium rectangular profile is also widely found in framework, support columns, gates and fencing, handrails and protective...