AUTOMOTIVE - 3573 Annonces

Samedi 06 mai 2023

Prix : USD2-USD200

Parts of Engine Cooling System 30% of the heat generated by engine combustion is taken away by the automotive cooling system components and dissipated into the air by the cooling fan. The key objective of the car engine cooling system parts is to keep the engine at optimum efficiency...

Samedi 06 mai 2023

Prix : USD2-USD200

Overview of SDZ Products in Automotive Industry The engine is the power source that makes the car move. Vehicle engine components play vital function can not be ignored. To keep engine running in good condition, the importance of the cooling system cannot be overlooked. Since SDZ...

Samedi 06 mai 2023

Use Merrell microfiber wall wash mop to remove dust from the wall, use a microfiber pad to absorb dust, clean the walls, and then wet and wipe the mop. You can also use a brush to easily remove the dust on the reusable microfiber mop. And then dry the walls, and gently wipe the surface...

Samedi 06 mai 2023

Prix : 100USD

Multi axial simulation table (MAST) simulates the vibration of real-world environments in the laboratory. Element provides multi-axial vibration testing for a full range of vehicle components and assemblies, delivering the data that automotive engineers need to develop safer, more reliable...

Samedi 06 mai 2023

Prix : 100USD

KRD70 series hydraulic vibration shaker is an electronic hydraulic servo vibration test machine with the advantages of fast response speed, high anti-load rigidity, flexible control mode, high performance, and high reliability. The hydraulic vibration shaker is a device that converts...

Samedi 06 mai 2023

Prix : 100USD

KRD61 series 6-DOF test table is six-degree-of-freedom multi-functional closed-loop servo motion simulation test equipment. It is applied to provide the user's system single 6-DOF (X, Y, Z, α, β, γ) motion of longitudinal, horizontal, vertical, roll, pitch, and heave. This multi axial...

Vendredi 05 mai 2023

Electrophoresis metal coating can be called electrocoating, e-coating, electrophoretic painting, and probably a few other things. In any case, the parts are immersed in solution in an electrified tank containing the paint. Electrophoresis plating is drawn to the parts, where the addition...

Vendredi 05 mai 2023

The characteristics of plastic cnc machining china material are defined by the melting point temperature (150 ° to 450 °) and the use environment (ordinary plastics and engineering plastics). When CNC is processing plastic products of plastic CNC service, the material deformation...

Vendredi 05 mai 2023

CNC machining has not too many restrictions on CNC material list. Common plastics, metals, or special materials can be processed, but the processing difficulty is different, the selection of CNC machining cutting tools material and the processing parameters of machine tools are different...

Vendredi 05 mai 2023

Quantité : 1-1000PCS - Prix : 500-10000￥

Ningbo Cheeven New Materials is one of the China Led FSW Manufacturers and die casting lighting factory.We have a team of die casting lighting to design, develop and manufacture our own luminaries, and offer a superior range of product and service including die cast aluminum outdoor lighting...

Vendredi 05 mai 2023

Most of the world's steel is made into finished products by stamping. The body, chassis, fuel tank and radiator sheet of automobiles, steam ladle of boilers, the shell of containers, and silicon steel sheet of the iron core of motors and electric appliances are all stamping processes...

Vendredi 05 mai 2023

Quantité : 100000 - Prix : 11-30 USD

Overview The 3014 led bulb is easy for drivers to notice. G9 3014 led bulb is designed as a side light for the backlight of the dashboard, which is very bright. Its shape can be chosen as Round or semicircle with great instruments light. 3014 LED Bulb Details Round or Semicircle...

Samedi 29 avril 2023

Quantité : 0 PCS-1000 - Prix : 1 USD/set ~ 300 USD/

GreensTone mechanical design engineers will work with your team to design and test the best solutions for your products. Gain full access to our specialized molding capabilities including layout, thermal analysis, prototype and verification testing, CNC machining, sheet metal fabrication...

Samedi 29 avril 2023

Automotive Electronic Cooling Fan is a kind of engine cooling parts usually installed between the engine and the radiator. When the fan blade is driven and rotated by the engine, car cooling fan generates high-speed airflow and takes away the heat of the coolant in the radiator, so...

Samedi 29 avril 2023

Auto off relay control higher voltages or currents by using lower voltages or currents. When a certain voltage or current is applied to both ends of the electromagnetic relay coil, the magnetic flux generated by the coil passes through the magnetic circuit composed of the iron core...

Samedi 29 avril 2023

The auto ac expansion valve of the automotive air conditioner is installed at the entrance of the evaporator, and has two main functions. Throttle effect. After the high temperature and high pressure liquid refrigerant is throttled through the orifice of the auto ac expansion valve...

Samedi 29 avril 2023

Shot blasting machine is an effective method to remove the surface contaminant, clean and roughen a smooth surface before applying a primer or coating. Shot blasting equipment is used in almost every industry that uses metal, including aerospace, automotive, construction, foundry...

Samedi 29 avril 2023

Prix : 200,000 USD~1,500,00

Polymer is the most commonly used pa12 3d printing material due to the relatively low cost of prototyping and production compared to other 3D printing materials. - PA 12 nylon powder PA12 is made from fine polyamide powder. Compared to traditional 3D printed plastic material, PA12...

Samedi 29 avril 2023

Prix : 200,000 USD~1,500,00

After World War II, the word "superalloy" came into being to describe a kind of high-performance alloys, which was specifically developed to extend the service life of aircraft parts exposed to extreme high temperature. Superalloy with nickel, iron, cobalt as the base, through the...

Samedi 29 avril 2023

Prix : 200,000 USD~1,500,00

Machines & Materials For Your Metal 3D Printing Demands Eplus3D metal printers are a lab from entry-level models to multi-layer machines for additive production at industrial grades. We also provide advanced processes industrial metal 3D printing with the most various metal materials...

Samedi 29 avril 2023

Prix : 200,000 USD~1,500,00

Using MPBF (Metal Powder Bed Fusion) technology, the EP-M650 is using a 657 x 657 x 800 mm³ build envelope and four laser systems to ensure a high efficiency printing production. The precise positioning and innovative area splicing control technology hereby offers uniformity and stability...

Samedi 29 avril 2023

Quantité : 30 sets - Prix : USD10,000-USD100,000

The pipe roll forming machine is a high-quality, high-efficiency rounding device for winding carbon steel, stainless steel and non-ferrous metal profiles (round tubes, angle steels, grooved steel, , etc.) into rings and flanges. The tube roll forming machine is one of the types of...

Vendredi 28 avril 2023

Injection molded plastic gears is one of the most widely used transmission mechanisms in the field of instruments & meters, timers, reducers, cameras, copiers, fax machines, shredders, printers, vacuum cleaners, automatic coffee machines DVD moving support, automotive rearview mirrors...

Vendredi 28 avril 2023

Prior to the invention of the plastic foam pump, the foam was usually ejected from the product in the form of an aerosol, i.e., the liquefied gas was used to swell the effluent to form a foam, or the post-foaming agent was used to cause the squirted colloid to form a foam. Products...

Vendredi 28 avril 2023

Architecture Panel Architectural panel system is a type of architectural panels exterior siding(wall cladding) that is generally used on large commercial and high-rise buildings. These types of architectural panel system offers many features that make them an excellent choice to cover...

Vendredi 28 avril 2023

Connector plugs are used as electromechanical components to connect electrical circuits. AP team is able to produce connector plugs with high working voltage, high protection, and low-temperature rise. Features of wire harness connector Reliable connection Low cost, affordable price...

Vendredi 28 avril 2023

AP IEC AC charging plugs conform to IEC 62196-2 2-llb provisions and requirements. It is compatible with different brand vehicles and ensures safety during the charging period. Features of ac type 2 connector Conform to the requirement of IEC 62196-2 2-llb. The bottom of the pin is...

Vendredi 28 avril 2023

Quantité : 1-50 tons - Prix : 1.7-3.5 usd/kg

This series of hot melt adhesive can bond the mirror and the metal or plastic. We have car rear mirror glue, car side mirror glass glue and car glue for mirror. Car Mirror Application This series of wholesale hot melt adhesive can bond the mirror and the metal or plastic. Our automotive...

Vendredi 28 avril 2023

Quantité : 1-50 tons - Prix : 1.7-3.5 usd/kg

Automotive Carpet Adhesive This series of automotive bonding adhesive can bond the carpet in a car truck Automotive Carpet Adhesive Application This series of hot melt adhesive glue can bond the carpet in a car truck. Carpet Assmbly Glue in Car Truck Manual hot melt glue gun or semi-auto...

Vendredi 28 avril 2023

Quantité : 1-50 tons - Prix : 1.7-3.5 usd/kg

Automotive adhesives products are the most environmentally friendly and suitable hot melt glue types for high-speed automatic assembly line operations. Today's automobile industry is developing rapidly. With the improvement of the auto production level, the automobile industry needs...