SCREWS - 4751 Annonces

Samedi 08 avril 2023

Quantité : 1000pcs - Prix : Negotiable

HOTEC Recessed Towel Dispenser shall be type-304 stainless steel with all-welded construction, smooth surfaces with satin finish, vandal-proof and has inspection slot to view refill level in the front. Super durable and long lasting. We have designed several styles of them, and...

Samedi 08 avril 2023

Geko pneumatic actuators used compressed air to exert force on a cylinder piston and thus push or pull it in a specific direction. The motion of the piston is delivered to the parts to be moved via the piston rod or magnetic friction closure. A pneumatic cylinder is an actuator operated...

Samedi 08 avril 2023

Technical Data Painted steel or stainless steel casing. Casing and operating screw oversized. Tightness with gasket when closed. Stainless steel gate(reinforced). No retention zone on stainless steel back seat. All manoeuvring parts in stainless steel (stem and supports). Bronze nut...

Vendredi 07 avril 2023

The automatic steel coil slitting line is used for slitting wide steel coils into certain width strips coils. On the upper/lower blade axle of the steel coil slitting line, there is the round disk blade; it could be adjusted on the blade axle according to the slitting width, use screw...

Vendredi 07 avril 2023

XCWJC's tactile stud are made of 316/304 Marine Grade Stainless steel. They're designed with Anti-slip surface, commonly installed on the ground surface of the Metro station, Museum, and Shopping malls and other public place to alert blind and visually-impaired people of a nearby...

Vendredi 07 avril 2023

Stainless steel tactile strips are strong enough to help the visually impaired people get through stably and guide them to the right direction. The tactile strip can be easily paved onto different public places. Xiongchang supplies a wide range of stainless steel tactile strips for you to choose...

Vendredi 07 avril 2023

Stainless steel Stair Nosings This is a stainless steel stair tread nosing that makes a stair/step edge attractive and safe to walk on and can be retrofitted in existing stairs. Available in stainless steel(V2A),the profile can be used both internally or externally in residential...

Vendredi 07 avril 2023

Skatestops (XC-MDD1700C) Place of Origin: Zhejiang, China (Mainland) Brand Name: XC Advantage: Factory Directly Sale Function: Anti-slip and provide protection for the blind and disabled The Details of Skatestops DIMENSIONS: 35mm FINISH: Machined Material : SUS316L FIXING METHOD ...

Vendredi 07 avril 2023

Quantité : Quantities

Sibai made many kinds of customized nuts. We customize nuts according to drawing requirements. We produce the thread according to various standard Sibai Custom made nuts Features Sibai made many kinds of customized nuts. Nut is a necessary part of all manufacturing machinery. There...

Vendredi 07 avril 2023

Quantité : Quantities

Sibai provide custom metal washers from almost any material: Steel, Stainless Steel, Aluminum, Brass, Copper, Titanium, Nylon, Acetal, PTFE, Fiberglass, Rubber and more. The finishing capabilities Sibai can provide are Heat treating, Plating, Flattening, Painting, Grinding, Coating...

Vendredi 07 avril 2023

Quantité : Quantities

Sibai does not manufacture its own springs. But springs are often an essential part in the assembly of products. Sibai purchases a large number of springs of various types for customers' assembled products. Custom springs Features A spring is a mechanical part that uses elasticity to work...

Vendredi 07 avril 2023

Quantité : Quantities

Sibai doesn't focusing on production bolt and pins. But if customer requires, we can help purchase from Chinese supplier. Besides this, Sibai can produce the custom stud bolt or pins according to customers specific designed drawings. Sibai custom bolts and fasteners Features Bolt...

Mardi 04 avril 2023

Rubber Coated Magnet or rubberised neodymium magnets are best described by one concept, that is: rubber coated magnet is a perfect combination of force and protection. Rubber covered magnets are actually one extension of pot magnets using the same working principle, but the rubber...

Samedi 01 avril 2023

Prix : USD0.1-15

A thread is a continuous helical ridge formed on the inside (nut) or outside (screw) of a cylinder. This ridge is called the crest. Between each crest is a space, called the root. Threads are set at an angle to the axis of the bolt or nut. DESCRIPTION OF THREADED PARTS What Is Thread's Function...

Samedi 01 avril 2023

Rectangular splines are mostly six splines. This type of spline is better than a single key and can withstand greater torque. It is convenient for various screw elements to be mounted on the mandrel. The mandrel material is also a 40CrNiMoA forging of alloy structural steel. Quench...

Samedi 01 avril 2023

Side Feeder Elements This side extruder feed screw is to help the bulk materials that are fed into the extrude. This extruder feed screw features a smooth surface finish and pocket-to-pocket accuracy for flawless container transfer without scuffing, damage. Feed Screw Manufacturer...

Samedi 01 avril 2023

Screw Shaft Manufacturer Screw Shaft Diameter: φ20 mm ~φ300 mm Screw Shaft Properties: Wear-resisting, Corrode-resisting, Durable Extruder shaft is key to pow transmission and ensure the extruder running smoothly. That's the reason why we do more tests on individual combination...

Samedi 01 avril 2023

Kneading Screw Elements Manufacturer Kneading Element Diameter: φ20 mm ~φ300 mm Kneading block Properties: Wear-resisting, Corrode-resisting, Durable The conveying screw element is self-sweeping type, open longitudinally and closed laterally, which has strong conveying effect. Short...

Samedi 01 avril 2023

Good force pull on the material ,meanwhile the material can be fully distributed evenly without shearing, so the temperature of the material could be cooling down Technical Details of Mixing Rotor Brand：LESUN Model：φ20 ~ φ300 Material：38CrMoALA/ W6Mo5Cr4V2/ HIP Properties: Wear-resisting...

Samedi 01 avril 2023

The metric spline shaft stock is the form of mandrel splines used by all the twin screw extruders over the world. The standards of the spline are Chinese GB standard, German DIN5480 (or DIN5482) and Japanese standard. The design of the involute spline shaft can make the groove depth...

Jeudi 30 mars 2023

The principle of this pot magnet is to glue one piece of solid disc magnet, either NdFeB or Ferrite, into the steel housing. Then, depending on customer's applicational requirement a cover made of stainless steel is available. NdFeB Flat Pot Magnet These NdFeB pot magnets are often...

Jeudi 30 mars 2023

Pot Magnets with Screw Holes Description These neodymium magnet with screw hole feature threaded holes that enable users to fasten them on walls, wood boards, etc for holding tools. NdFeB(neodymium) magnet is used for the strong force. Pot magnet is named after its shape, and it is...

Jeudi 30 mars 2023

They are round magnets with hole in center and they can be also called: pot magnet with borehole, pot magnet with mounting holes, holding magnet with borehole, etc. This is one of the most widely used pot magnets. They are made by gluing magnets and steel pots together. Filling materials...

Mercredi 29 mars 2023

The body of the basic grade barrel is made of 45 # steel. The liner of the barrel is made of basic alpha-101 bimetallic material. The high-grade barrel adopts imported HIP powder alloy oval liner. Its material has excellent wear resistance, corrosion resistance and other properties...

Mercredi 29 mars 2023

BOYA multi-roll leveler is the core equipment of finishing process in metallurgical hot and cold rolling mill. By repeatedly bending and convex straightening of the strip, the strip can be straightened with high strength and precision; Widely used in high strength steel, precision steel strip...

Mercredi 29 mars 2023

Quantité : 1200sets/y - Prix : USD10000-200000

ZNC Die Sinking EDM Machine ZNC EDM Sinker has X and Y-axis manual control, and Z-axis automatic control. It can do one single job after manually set position, and job setting is also manual. Ideal for molds and spare parts manufacturing industries, ZNC die sinking EDM machine for...

Mercredi 29 mars 2023

Quantité : 1200sets/y - Prix : USD10000-200000

Windows Platform CNC EDM Machine ADI series CNC EDM sinker has the latest control system at the platform Windows 7, efficiency is about 20-30% higher than previous DOS based control system. Types of windows EDM machines made by DMNC are listed below. ADI300 CNC EDM Machine With Manual...

Mercredi 29 mars 2023

Quantité : 1200sets/y - Prix : USD10000-200000

General Purpose CNC EDM Wire Cut Machine F Structure DK77 series high speed wire cut EDM has non-resistors HF power with Max cutting speed higher than 300mm2/min, Max cutting thickness is higher than 1000 mm. High accuracy linear guide way, ball screw and strong machine body with...

Mercredi 29 mars 2023

Quantité : 500000tons - Prix : $5-$200000

The drill pipe is the steel pipe with thread at the end, for connecting the drill ground equipment and drilling equipment in drilling bottom or bottom hole device. The drill pipe is the device which used to transport drilling mud to drilling bit, and improve, bring down or rotary...

Mercredi 29 mars 2023

The movable sand blasting room or portable blast room, abrasive recovery system, dust collector, sandblasting machine together, it can be transported to the site by flatbed truck. The installation time is less than 2 hours, which is the best equipment for field-flow operation. Transportable...