RESINS - 4369 Annonces

Mercredi 01 juin 2022

Promotional hard enamel pin badges is preferred by those who want a more durable pin, but can be more expensive and generally has more restrictions when it comes to colouring. Hard enamel pins can appear subdued and less vivid than soft enamel pins. Additionally, hard enamel pins...

Samedi 28 mai 2022

High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc. Properties...

Samedi 28 mai 2022

Magnets and magnet assemblies have to meet increasingly complex requirements. Hard-Ferrite Bonded Magnetic Compounds Compared to rare earth magnetic materials, hard ferrites has obvious cost advantage due to the use of cheap strontium oxide, barium oxide and iron oxide as raw materials...

Samedi 28 mai 2022

Light density and low cost of ferrite bonded magnetic compounds (hard ferrites magnets) create a high-cost performance. Therefore, it has the largest market demand and is the most extensively used in the field of modern home appliances, office supplies, communication devices, and defense...

Mercredi 25 mai 2022

Quantité : 1000Kgs - Prix : USD1~2000/Kg

Cyclopentasiloxane And Trimethylsiloxysilicate SiSiB® PC11259 is a mixed product of MQ silicone resin dispersed in volatile cyclomethicones, forming a washing durability and anti-migration film. Silicone resin solid sediment will appear if this product was in an un-sealed condition...

Mercredi 25 mai 2022

Quantité : 1000Kgs - Prix : USD1~2000/Kg

Trimethylsiloxysilicate SiSiB® PC11258 is environmentally friendly production processes, without toluene and xylene which is soluble in a number of silicone and organic fluids. The product is durable material which provides excellent water repellence and resistance to detergent wash off...

Mercredi 25 mai 2022

Quantité : 1000Kgs - Prix : USD1~2000/Kg

Acrylates/Tris(Trimethylsiloxy)Silylprop yl Methacrylate Copolymer (and) Cyclomethicone SiSiB® PC11256 is a mixture of high molecular weight acrylates in cosmetics/ tris(trimethylsiloxy) silylpropyl methacrylate copolymer and cyclomethicones, forming a shin hydrophobic, anti-migration...

Mercredi 25 mai 2022

Quantité : 1000Kgs - Prix : USD1~2000/Kg

Bis 3 trimethoxysilyl propyl amine SiSiB® PC1118 is a secondary aminofunctional silane possessing two symmetric silicon atoms. SiSiB® PC1118 may act as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics...)

Mercredi 25 mai 2022

Quantité : 1000Kgs - Prix : USD1~2000/Kg

3 Aminopropyltrimethoxysilane SiSiB® PC1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It is the equivalent of Momentive's A-1110...

Mercredi 25 mai 2022

Quantité : 1000Kgs - Prix : USD1~2000/Kg

Bis 3 triethoxysilyl propyl amine SiSiB® PC1108 is a yellowish liquid with an amine-like odor. It is the equivalent of Evonik's Dynasylan 1122. SiSiB® PC1108 amino silane may act as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic...

Mercredi 18 mai 2022

Acrylic resin has high hardness, full coating film, good heat resistance, water resistance, solvent resistance, chemical resistance, and good weather resistance, good gloss and color retention. Acrylic coatings are mainly used for topcoats with high decorative and high weather resistance...

Mercredi 18 mai 2022

Acrylic modified vinyl perchloride anticorrosive finish is formulated with vinyl perchloride resin and modified acrylic resin, pigments and solvents. It is a single component, quick-drying, good resistance to chemicals and humidity. Perchloride primer is formulated with vinyl perchloride resin...

Mercredi 18 mai 2022

Epoxy with exterior varnish is a type of varnish produced from epoxy resin with dye or pure epoxy resin. It consists of epoxy resin, organic solvent, epoxy treatment agent, etc. It has excellent adhesion, acid resistance and is used in strong corrosive environments. According to different...

Mercredi 18 mai 2022

Quantité : 15000 piec - Prix : $5-100

Cheap essential oils bulk are concentrated plant extracts. They're made by steam distillation or CO2 extract various parts of a plant (flowers, bark, leaves or fruit) to capture the compounds that produce fragrance. In addition to creating scent, essential oils perform other functions...

Mercredi 11 mai 2022

Insert molding is a molding method to make integrated products. Ⅰ. Definition of insert molding Plastic insert molding means that after inserting a pre-prepared dissimilar material into the mold, injecting resin and molten material, and finally joining with the insert to solidify...

Mercredi 11 mai 2022

Prix : 1-50000000

Aerospace Aerospace refers to various aircraft that move in accordance with the laws of celestial mechanics in the outer space of the earth's atmosphere. The products we provide include but are not limited to Helicopters, Passenger, Planes, Rockets and other space tools. We are committed...

Mercredi 11 mai 2022

Prix : 1-50000000

Mold Custom Based on 30 years of experience in mold usage and management, Haier started from mold project, mold procurement, mold and molding design, mold processing and assembling, to the whole process of customized service for the enterprise of mold delivery. As a precision molding company...

Mercredi 11 mai 2022

Prix : 1-50000000

Special Bolt For Positioning Drawing Board Customize and sell various special bolts for positioning drawing boards Lightning bolt mold with high-quality is available in our company. You can pick a satisfactory lightning bolt resin mold to manufacture bolts in batch production at a low cost...

Mercredi 11 mai 2022

Prix : 10-30USD

Coffee Maker Temperature Sensor Specification: TPS191220-21 Details Material: Thermistor/PVC Wire Applicable temperature range: -30~120℃ Output signal: analog signal output Advantages High-temperature glass sealed thermistor and wire nose epoxy resin encapsulation, fast response speed...

Samedi 30 avril 2022

Dimensions: W29×H41cm Materials: Resin and fabric Colors: White, black Estimate lead time: 7-15 days Description of Dog Shaped Table Lamp To have a table lamp dog for home decoration that brings unique character to an accent table, console table, desk, or nightstand. Infuse your space...

Jeudi 21 avril 2022

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

E-Grind supplies the whole range of pcd cutting tool blanks for pcbn cutting tools purpose. The largest Diameter available can be 55mm. Our PCD provides high wearing resistance ability and high finishing surface. Application of pcd metal Our plant installs laser cutting machines and...

Jeudi 21 avril 2022

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

What Is Diamond Powder E-Grind's metal bond micron diamond products offer good Roughing, Lapping and finishing results. For resin bond, vitrified bond, and electroplated bond. Application of micron diamond powder: for stone, watch, optical glass, etc. Types of Metal Bond Micron Diamond...

Jeudi 21 avril 2022

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

E-Grind's metal bond mesh diamond combines both using life and working efficiency. Suitable for resin bond, vitrified bond, metal bond, and electroplated bond system. Application: glass, PCD/PCBN, dental tools, gemstone Metal Bond Mesh Diamond for Sale Metal Bond Mesh Diamond: EA-M19...

Jeudi 21 avril 2022

UV curing repair technology is the most effective and fast solution for pipe rehabilitation. Because of its high efficiency and low cost, UV curing repair technology is now widely used in the pipe rehabilitation industry. As one of the professional sewer rehabilitation companies in China...

Mercredi 20 avril 2022

Description: Plastic Valve 3 Plate Mould Tolerance: +-0.01mm Surface: SPI A2 & VDI 3400 Part material: PPO food grade Shrinkage: 0.6% Cavity steel: ASSAB 8407 HanKing Mold Tolerances Plates and Mold Base Components: ± 0.013 mm (± 0.0005 in) Cavity components: ± 0.005 mm (± 0.0002...)

Mardi 19 avril 2022

Silicone rubber injection molding has more than a half-century history since the late 1970s. There are two molding ways of silicone rubber injection molding process: Liquid Silicone Rubber Injection Molding (LSR) and Solid Silicone Rubber Molding. There are thousands of applications...

Mardi 19 avril 2022

Prototype molds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering...

Mardi 19 avril 2022

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts. Multi...

Mardi 19 avril 2022

Packson is not totally the same as other medical molding companies. Because we are an ISO-certified medical molding provider. Packson had got the certification of ISO 13485: 2018 and ISO 9001: 2008. We've been working with healthcare and medical companies like BD, Wondfo since 2008...

Samedi 16 avril 2022

7CF® high heat appliance spray paint (300℃) is an organosilicone resin base high heat aerosol paint, which is made of special organosilicone resin, heat resistant pigments, and additives combined with advanced production technology. Heat spray high temperature paint has the characteristics...