IONS - 2017 Annonces

Lundi 12 août 2019

Syringe filter is a kind of filter connected to the front of the syringe. When the experimenters deal with the chromatographic samples with syringe filter, they should pay attention to avoiding bringing impurities in the process of filtration. One reason for the appearance of such...

Lundi 12 août 2019

The system of an HPLC column is composed of a liquid, a reservoir, a pump, a sampler, a column, a detector and a recorder. - The packing material of HPLC columns - The packing material has high carbon content, small surface polarity, very low chemical purity and high surface separation...

Lundi 12 août 2019

Solid phase extraction principle Solid phase extraction is a separation technique that combines selective retention, selective elution, and the like. When a complex sample solution passes through the sorbent, the sorbent selectively retains the aimed compound and a small number of...

Vendredi 09 août 2019

Lithium batteries are primary batteries that have metallic lithium as an anode, they are also referred to as lithium-metal batteries. Lithium-Ion Battery offers up to 20 times longer cycle life and five times longer float/calendar life than a lead-acid battery, helping to minimize...

Vendredi 09 août 2019

Dongjin Lithium iron Phosphate battery (LiFePO4) is comprised by cells of 3.2V each. LFeLi Battery offers up to 20 times longer cycle life and five times longer float/calendar life than lead acid battery, helping to minimize replacement cost and reduce total cost of ownership. Lithium-Ion...

Jeudi 08 août 2019

Flash columns adopt high-capacity silica gel for precise filling, which has very excellent separation and purification performance. The specific surface area of high-capacity spherical silica gel is 40% higher than that of ordinary spherical silica gel, and the sample loading is twice...

Jeudi 08 août 2019

Most common SPE cartridges are injection syringes made of polyethylene, in which there are two plugs made of polypropylene or fiberglass, with a certain amount of chromatographic adsorbent (filler) between the two plugs. SPE cartridges without sieve plate 1. Avoid “non-specific adsorption” 2...

Mercredi 07 août 2019

The principle of vacuum filtration is forming the negative pressure to drive the filtration at the outlet of the filtrate. This kind of filtration according to the forms of operation is divided into two types: batch operation and continuous operation. The vacuum filtration with batch...

Mardi 06 août 2019

Ion-exchange solid phase extraction is widely used in biological samples and environmental monitoring. During the extraction process, the pH of the sample is adjusted so that the solute is easily ionized. The solute is exchanged from the resin by changing the pH or increasing the...

Samedi 03 août 2019

In the application of membrane separation technology, the microporous membrane is the most widely used membrane variety. It is simple and fast to use and is widely used in many fields such as scientific research, food testing, chemical industry, nanotechnology, energy, and environmental...

Samedi 03 août 2019

SPE cartridge can be divided into three classes on the markets: silica-based cartridges, polymer-based cartridges, and adsorption-based cartridges. And here we talk about the three types of silica-based cartridges. The first type is the C18 cartridges. This kind of cartridges bond...

Jeudi 01 août 2019

The flat sheet ceramic membrane is a new type of high temperature plate porous ceramic membrane, which is prepared by high temperature sintering process using inorganic materials such as alumina. Compared with the organic film, ceramic flat membrane has the advantages of good chemical stability...

Jeudi 01 août 2019

As a core technology, JIUWU has become the largest ceramic membrane element producer and a world leader in cross-flow filtration. Electrodeionization (EDI) is a kind of pure water manufacturing technology which combines ion exchange technology , ion-exchange membrane technology and...

Jeudi 01 août 2019

There are two different cases of retention time: retention time drift and retention time fluctuations. The former means that the retention time changes only in one direction, while the latter refers to the fluctuation of the retention time without a fixed law. It is often helpful...

Mercredi 31 juillet 2019

Solid phase extraction (SPE), developed in the 1970s, can replace the traditional liquid-liquid extraction in many fields and has been applied more and more widely in the laboratory. The common solvent of SPE Hexane, isooctane, tetrahalide carbon, trihalomethane, dihalomethane, tetrahydrofuran...

Mardi 23 juillet 2019

Introduction of the flake graphite Flake-graphite is probably the most familiar of the natural flake graphite materials. Most people are familiar with the finely powdered graphite used as a lock lubricant, or the “lead” in pencils. Both of these products typically contain natural...

Vendredi 19 juillet 2019

Bonded-phase chromatography is a liquid-liquid chromatography method in which a stationary phase is covalently bound to a carrier particle, which overcomes the mechanical shock in the distribution chromatography, the constant loss of the stationary phase and the gradual change of...

Mercredi 10 juillet 2019

A bottle-top dispenser is a device installed at the mouth of a solvent bottle to take a large amount of solution and has been constantly updated and improved to meet the growing operational requirements of the laboratory for more than ten years. There are two kinds of bottle-top dispensers...

Mardi 09 juillet 2019

The reversed-phase HPLC columns may be repeatedly injected into a sample containing a strongly retained material, and in particular, the sorbent components such as large molecular weight or hydrophobic biological flow proteins and strong alkaline substances may be adsorbed on the silica medium...

Mardi 09 juillet 2019

Polymeric MCX SPE cartridges are used to extract strongly alkaline compounds. MCX is a mixed strong cation exchange adsorbent obtained by bonding sulfonic acid groups on highly crosslinked PS/DVB surface. It has both reverse phase and cationic exchange retentive properties and good...

Lundi 08 juillet 2019

SPE Technique Introduction SPE(Solid-phase Extraction), is an increasingly popularized technology of sample pretreatment, which is established on the basis of traditional LLE(Liquid-liquid Extraction). Combined with the substance interaction mechanism that like dissolves like, and...

Jeudi 04 juillet 2019

Activation, also known as solvation, add a suitable solvent to expand the functional groups on the adsorbent and remove possible interferences on the adsorbent. Equilibrium, remove the activated solvent to create a suitable solvent environment for sampling. Usually, use the same solvent...

Lundi 01 juillet 2019

After selecting the type of SPE cartridges, we have to determine the specifications of the SPE cartridge. The principle of selecting the SPE cartridge specification is to first ensure that the SPE cartridge packing has sufficient capacity to retain the target compound 100% on the column...

Vendredi 21 juin 2019

The cation chromatography column is a kind of high-performance liquid chromatography, which is a liquid chromatography method for analyzing anions and cations. The method has the advantages of good selectivity, sensitivity, rapidity, and simplicity, and can simultaneously measure...

Vendredi 21 juin 2019

Normally SPE cartridge has two basic adsorption modes: target compound adsorption mode, impurity adsorption mode; 5 operation modes: gravity operation, manual positive pressure, centrifuge, negative pressure and positive pressure mode. Now let's review the whole process step by step...

Jeudi 20 juin 2019

Firstly, let's divide those bottle-top dispensers into 3 groups according to their materials A. Highly corrosion resistant materials such as PTFE, PFA, boron silicate, platinum, etc. Application: Resistant to high-temperature sterilization (121℃), withstand most of the acid, alkali...

Dimanche 16 juin 2019

Ceramic Nanofiltration membrane is relatively recent membrane filtration system, with the purpose of softening and removal of disinfection by-product precursors such as natural organic matter and synthetic organic matter. More ultrafiltration membrane system details here! CHARACTERISTICS...

Vendredi 14 juin 2019

Hawach introduced the properties and application range of HPLC column stationary phase in the silica gel matrix. Silica gel matrix: Silica gel, weakly acidic, has a strong memory, used to separate non-polar, weakly acidic compounds, oils, etc.; C18, a silica-based uncapped reversed-phase...

Mardi 11 juin 2019

Solid phase extraction (SPE) is a separation process by which compound that is dissolved or suspended in a liquid mixture, thereby being separated from other compounds in the mixture according to their physical and chemical properties. There are 4 general functions as below: 1.Matrix...

Jeudi 06 juin 2019

The main function of the microporous filtration membrane and syringe filter is to trap and filtering of the particles, bacteria and other impurities from the gas phase or liquid phase for separation, purification and purification purposes. The following factors should be considered...