FORCE - 5804 Annonces

Mercredi 02 août 2023

A solenoid operated diaphragm valve is one of the crucial control units of any fluid control system to control the media of liquid or gas. When the power is on or off, the media (liquid or gas) can pass through the valve or not, to achieve the purpose of shutting off or allowing fluid flow...

Mardi 01 août 2023

Fully Covered Esophageal Stent Micro Tech Nanjing provides you with a comprehensive selection of self-expanding stents for bypassing esophageal stenoses. The stents are characterised by very high flexibility. The working diameter of the stent is 18 or 20 mm; as regards the lengths...

Mardi 01 août 2023

Positional stability is paramount with colonic stents. MICRO-TECH TTS colonic and rectal stents are known for their ability to anchor safely inside the bowel and optimally adapt to the anatomy and peristalsis of the colon. The transition from the main body of the stent to its spherical...

Mardi 01 août 2023

Soybeans fiber is a natural water-soluble soy dietary fiber and insoluble dietary fiber composed of galactomannan, xylan and mannan. The soy protein fiber uses the latest technology to extract soybean fiber from the cell wall of soybean seeds. Soy dietary fiber has a variety of...

Mardi 01 août 2023

Birkom shock absorber wholesale is designed by an international team of Koman automotive shock absorber suppliers production and management strictly follow the TS16949 international standard with shock absorber OEM service. China shock absorber factory direct supply, our shock absorber...

Samedi 29 juillet 2023

Copper Press Fitting is a flameless alternative to soldering copper pipe connections. In this system, a hydraulic tool is used to press specially designed connectors to join traditional . These connectors house a sealing element that, when pressed, creates an even and reliable connection...

Samedi 29 juillet 2023

Category: permanent magnetic lifter / china lifting magnets Advantages: scientific magnetic circuit disign, powerful magnets used, strong magnetic holding force available, electic-power not needed About permanent magnetic lifter/Lifting Magnets/Hoisting Magnets Permanent magnetic...

Samedi 29 juillet 2023

Category: rare earth magnets/ Samarium-Cobalt magnets/ SmCo magnets Advantages: highest coercive force; highest working temperature; good temperature stability Disadvantages: price is too expensive The same as neodymium magnets, Samarium Cobalt magnets are also rare earth permanent magnets...

Samedi 29 juillet 2023

Category: rubber magnets/ flexible magnets Advantages: can be made into complex shape without mechanical processing Disadvantages: low magnetic energy and low working temperature Brief introduction of rubber magnetic strips: Rubber magnetic strips are mold extruded strip type rubber magnets...

Samedi 29 juillet 2023

At Packson, we specialize in manufacturing custom precision mold components and machined parts that meet or exceed international quality standards, including ISO 9001 and 13485. Our team is dedicated to building custom, durable, high-quality precision mold parts with the spirit of craftsmanship...

Samedi 29 juillet 2023

Packson's injection molding machines range in capacity from 60-800T, providing a wide range of options for our clients. Our facility includes 40 sets of injection machines, with 9 NISSEI and 14 LSR machines housed in a class 8 clean room to ensure the highest level of cleanliness and quality...

Samedi 29 juillet 2023

Tianchuang's wave guardrail is composed of two corrugated steel guardrail plates and two vertical columns sandwiched between the two. The two-column clamps are clamped between two corrugated steel guardrail plates. The column is connected to the board in a blocking block type and a bracket type...

Vendredi 28 juillet 2023

Quantité : 300m-350m/ - Prix : 100USD

Good force pull on the material, meanwhile the material can be fully distributed evenly without shearing, so the temperature of the material could be cooling down Technical Details of Mixing Rotor Brand：LESUN Model：φ20 ~ φ300 Material：38CrMoALA/ W6Mo5Cr4V2/ HIP Properties: Wear-resisting...

Vendredi 28 juillet 2023

Quantité : 300m-350m/ - Prix : 100USD

The involute shaft is the form of mandrel splines used by all the twin screw extruders over the world. The standards of the spline are Chinese GB standard, German DIN5480 (or DIN5482) and Japanese standard. The design of the involute spline shaft can make the groove depth of the screw larger...

Jeudi 27 juillet 2023

The elevator buffer is the last protection measure in the elevator mechanical safety device. Lift car buffer is a safety device that relieves the impact force of an elevator when it falls out of control. Buffer in elevator is generally in the bottom of elevator cabin and counterweight...

Jeudi 27 juillet 2023

There are a variety of different applications for alpha alumina powders according to different morphology and purity. Our alumina polishing powder, choose linear and flake aluminum oxide powder which is suitable for use as abrasive, stable performance, strong grinding force, long slurry life...

Jeudi 27 juillet 2023

Quantité : 20000T

EN 13889 shackle specifies the design, materials, testing, and marking requirements for shackles used in lifting applications. It requires that the shackles be manufactured from high-quality materials and meet certain strength and durability criteria. The standard also specifies testing...

Mercredi 26 juillet 2023

Overmolding & 2k Molding The same type of material of different colors is usually used for two-color injection molding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product...

Mercredi 26 juillet 2023

Insert Moulding Design USM molds focus on structural parts injection molds, gas-assisted and water-assisted injection mold, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product...

Mercredi 26 juillet 2023

Gas Assist Injection Molding Design Guide Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection cycle of water-assisted is about 70% shorter than the injection cycle of gas assist molding; The product wall thickness of water-assisted...

Mercredi 26 juillet 2023

Quantité : 10000 - Prix : 4-10000USD

The PDC drilling drag bit consists of four parts: the bit body, the scraper blade, the water divider cap and the nozzle. The drill body is the body of the scraper bit with welded scraper blade and water divider cap, which is made of medium carbon steel. The lower end is welded with...

Mercredi 26 juillet 2023

AM50A magnesium alloy series is suitable for auto parts. YiRui Metal got 6KG long-term inventory. Other specifications need to be customized in advance. Yirui Metal, a professional magnesium alloy products company, is proud to offer high-quality AM50A magnesium alloy, which is ideal...

Mercredi 26 juillet 2023

Quantité : Per Order - Prix : $0.1-$200

The main features of the press ball valve are its compact structure, reliable sealing, simple structure and convenient maintenance. The sealing surface and the spherical surface are often in a closed state, which is not easy to be eroded by the medium. This OEM ball valve is easy...

Mercredi 26 juillet 2023

Quantité : Per Order - Prix : $0.1-$200

The half inch and 1 inch pex ball valve provided by Carbo, a professional pex ball valve factory, has good wear resistance. The reason for the OEM ball valve wear resistance is that the valve core when it is sealed is welded with alloy steel, and its sealing ring is also welded with alloy steel...

Mercredi 26 juillet 2023

Quantité : Per Order - Prix : $0.1-$200

In the field of valves, cold expansion ball valve is a top-mounted ball valve with a thermal expansion and contraction compensation structure, including a valve body, a valve ball, a valve seat and a valve cover. This new OEM ball valve is characterized in that: the valve seat is...

Mercredi 26 juillet 2023

Prefabricated Container Homes & House Buildings The Zhongtai china container homes for sale are created through a refined standard process that utilizes various materials including steel plate, sandwich board, bolt, aluminum parts, concrete, wood, ceramic tile, glass, paint, and others...

Mardi 25 juillet 2023

Clutch Actuator The truck uses compressed air to disengage and recombine the amt clutch actuator to complete the start and shift gears. A concentric pneumatic clutch actuator contains all elements connected to the gearbox system to disengage and reengage the trans clutch as required...

Samedi 22 juillet 2023

Tight configuration, small contact distance, snap action, high sensitivity, and short operating travel Long life, high reliability Global safety approvals Variety of terminals. Optional operating force varies from 100gf to 400gf Wide range of operating temperatures (-25° C~+150° C)...

Samedi 22 juillet 2023

Quantité : 1-100000pc - Prix : 0.01-1000USD

Extruded Molding The products are processed by injection molding extruder, with a smooth surface and high dimensional accuracy. Products of different sizes, colors, and types can be customized according to customer requirements. As a professional injection and extrusion molding company...

Samedi 22 juillet 2023

All Pumps Machinery supplies ZH, ZHR, ZHH, ZM, and ZL series Heavy Duty Wholesale Horizontal Slurry Pumps. Using latest wear-resistant 27% chromium alloy white iron is used for the part in contact with the medium, with a hardness of more than 62Hrc. The China horizontal slurry...