TEMPERATURES - 24037 Annonces

Mardi 24 août 2021

Product Description TF1100-EP Portable Clamp On Ultrasonic Flowmeter with Pulse Output.The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and non-intrusive flow measurement of liquid and liquefied gasses in fully filled pipe...

Mardi 24 août 2021

Wall-mounted Insertion Transit-Time Ultrasonic Flow Meter Product Description TF1100-EI Wall-mounted Insertion Transit-Time Ultrasonic Flow Meter 30 Year's Technology Insertion Ultrasonic Flow Meter provides abundant capabilities for accurate liquid flow measurement from outside of a pipe...

Mardi 24 août 2021

Wall-mounted Clamp On Ultrasonic Water Flow Meter Product Description TF1100-EC Wall-mounted Clamp On Ultrasonic Water Flow Meter works on the transit-time method. The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and...

Mardi 24 août 2021

DF6100-EP Doppler Portable Ultrasonic Flow Meter Product Description DF6100-EP Doppler Portable Ultrasonic Flow Meter Features uRechargeable battery can work up to 50 hours uIt is suitable for pipe sizes ranging from 40 to 4000mm uFor dirty liquids, a certain amount of air bubbles...

Mardi 24 août 2021

DF6100-EI Insertion Series Doppler Ultrasonic Flow Meter Product Description Ultrasonic Flow Meter can measure metal or plastic with a certain amount of air bubbles or suspended solids. Advanced technique allows this instrument to operate with high reliability and low maintenance...

Mardi 24 août 2021

Product Description DF6100-EC Wall-mounted Doppler Ultrasonic Flowmeter (Clamp-on) 1. Lanry Doppler Clamp on Ultrasonic Flow Meter for Liquid Mud is designed to measure volumetric flow of liquid within closed conduit, the pipe line must be full of liquids, and there must be a...

Mardi 24 août 2021

Prix : 1000-4000usd/unit

Product Description Product Introduction Of Doppler Flow Meter (Handheld Type) DF6100-EH Handheld Doppler Ultrasonic Flow Meter Series DF6100-EH Doppler Handheld Ultrasonic Flow Meter is designed to measure volumetric flow of within closed conduit, the pipe line must be full of liquids...

Mardi 24 août 2021

Prix : 200-5000usd/unit

Product Description DOF6000-P Portable Open Channel Ultrasonic Flow Meter The DOF6000 series flowmeter consists of Flow calculator and the Ultraflow QSD 6537 Sensor. The Ultraflow QSD 6537 Sensor is used to measure water velocity, depth, and conductivity of water flowing in rivers...

Samedi 21 août 2021

Quantité : 50 Pcs - Prix : USD 2,951.00

Price : USD 2,951.00 Min Order : 1 – 5 Pcs Lead Time : 3 – 6 Days Port : CIF / Kualanamu International Airport Terms : T / T, Western Union, Paypal, Money Gram Product : Ori and Ready in stock Medanvision sell products : Binoculars, Monoculars,Nightvision, Nightvision Goggles, Nightvision...

Samedi 21 août 2021

Quantité : 50 Pcs - Prix : USD 5,399.00

Price : USD 5,399.00 Min Order : 1 – 5 Pcs Lead Time : 3 – 6 Days Port : CIF / Kualanamu International Airport Terms : T / T, Western Union, Paypal, Money Gram Product : Ori and Ready in stock Medanvision sell products : Binoculars, Monoculars,Nightvision, Nightvision Goggles, Nightvision...

Samedi 21 août 2021

Quantité : 100+PCS - Prix : USD300-500

LED flood light can be seen as the point light that can illuminate all quarters uniformly. Its range of irradiation can be adjusted at random and appears as a regular octahedron icon in the scene. Normally, a LED floodlight can be used to illuminate the entire scene. Multiple floodlights...

Samedi 21 août 2021

SANVO & Fittings provides pipe fittings sale according to the needs of hardware customers. A nipple is a short segment of pipe with equal male threading at each end. It is typically used for connecting two other , fittings or hoses. Pipe nipples can be made from a wide range of materials...

Samedi 21 août 2021

Stamping mold is a special process equipment for processing materials (metal or non-metal) into parts in cold stamping processing, called cold stamping die. Stamping is a pressure processing method that uses a mold installed on a press to apply pressure to the material at room temperature...

Samedi 21 août 2021

Rotational mold is to first add plastic raw materials into the mold, and then the mold is continuously rotated along two vertical axes and heated. Under the action of gravity and thermal energy, the plastic raw materials in the mold are gradually uniformly coated and melted and adhered...

Samedi 21 août 2021

Injection mold is a tool for producing plastic products; it is also a tool for giving plastic products a complete structure and precise dimensions. Specifically, it refers to injecting the material melted by heat into the mold cavity by high pressure, and after cooling and solidifying...

Samedi 21 août 2021

Blow and Blister Mold are divided into manual blowing and mechanical blowing. Blowing technology uses glass to have the characteristics of plasticity in a certain temperature range. Blow and Blister Mold by COSMOPlat Did not find what you were looking for~ Details of Blow Mold Products...

Jeudi 19 août 2021

Smart Living Eye Massager with Heat, Air Compression Bluetooth Music Rechargeable Eye Therapy Massager for Relieve Eye Strain, Dark Circles, and Eye Bags to Improve Sleep. Spending hours working on the laptop or phone can cause fatigue for your eyes and mind. Fortunately, there are...

Jeudi 19 août 2021

LWIR lens plays a critical role in thermal imaging surveillance applications, beyond night vision capability, critical targets differentiation in poor vision conditions is considered the most practical attribute in homeland security and defense market segmentation. Compared to the cooled system...

Jeudi 19 août 2021

QGT Series Tilting Drum Type Shot Blasting Machine from professional shot blasting companies is one of the updated products based on GN series steel track shot blasting machine, with the features of high efficiency and uniformity. Due to the use of the roller mechanism, the drum not...

Jeudi 19 août 2021

As one of the professional gas density gauge manufacturers, Lanso is committed to offering SF6 gas density monitors/gauges, which include density relay, density meter, density switch, density transmitter, valves, and instruments. SF6 gauge is suitable for different kinds of working environments...

Jeudi 19 août 2021

The specification of WIT-18R2A-4-UVB Automotive Cable Ties For Round Hole Item No. Material Color For panel thickness(mm) For hole(mm) Bundle diameter(mm) Dimension(mm) MPQ(pcs) Original code L W H WIT-18R2A-4-UVB PA66 Black 0.6-2.5 Ø5 Ø2-Ø25 132 2.5 1 500 ...

Jeudi 19 août 2021

Waterproof cable tie is a kind of one-piece fixing tie with rubber seal. Mainly used in the automotive industry, especially suitable for car body applications, the door wire harness and tailboard wire harness. The matching rubber seal can greatly reduce dust, dirt and moisture entry...

Jeudi 19 août 2021

The specification of T50SOSEC22 Wire Harness PA66 Cable Tie With Edge Clip Item No. Material Color For plate thickness(mm) For hole(mm) Bundle diameter(mm) Dimension(mm) MPQ(pcs) Original code L W H T50SOSEC22 PA66 Black 1-3 / Ø1-Ø35 150 4.6 1.3 100 T50SOSEC22...

Jeudi 19 août 2021

The specification of customized automotive cable channel car engine bracket Item No. Material Color Dimension(mm) MPQ(pcs) L W H CN200-P3 PA66 Black 190.2 66.8 113.6 120 CN120S-P2-4 Nylon PBT+GF Black 258.7 117 75.6 25 Product name customized automotive...

Jeudi 19 août 2021

Hot forging is also called hot die forging by hot forging manufacturers. During the hot die forging process, the deformed metal flows violently and the forging contacts with the die for a long time. Therefore, the mold materials should have high thermal stability, high temperature...

Jeudi 19 août 2021

The purpose of quenching in heat treatment is to transform the undercooled austenite into martensite or bainite to obtain martensite or bainite structure, tempering at different temperatures to greatly improve the rigidity, hardness, wear resistance, fatigue strength and toughness of the steel...

Jeudi 19 août 2021

Define normalizing in heat treatment: Heat treatment Normalizing is a kind of heat treatment to improve the toughness of steel. In the normalising heat treatment process, after the steel members are heated to 30-50 ℃ above Ac3 temperature, they shall be kept for a period of time and...

Jeudi 19 août 2021

Heat treatment annealing is a kind of annealing heat treatment process, which means that the metal is slowly heated to a certain temperature, maintained for enough time, and then cooled at an appropriate rate. The purpose is to reduce the hardness, improve the machinability, reduce...

Jeudi 19 août 2021

Our heat treatment facility covers an area of 33300 square meters with more than 50 million RMB fixed assets. The annual output of heat treatment is more than 40000 t, and the annual output of forgings is more than 3000 t. WALKSON, as a reputable heat treatment manufacturer, has more...

Jeudi 19 août 2021

Quantité : 50,000-80, - Prix : 8-15 USD

Fiber optic terminal box includes faceplate and drop cable protection box which can be used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. This termination box fiber optic supports fiber splicing and splitting and meanwhile...