SOLID - 20778 Annonces

Lundi 26 avril 2021

Prix : 100USD

Colet coffee is an commercial coffee machine manufacturers and automatic coffee maker,which is also famous for it's quality. CLT-ZQJ01 Commercial Automatic Milk Steamer Machines is a high efficiency automatic milk frother commercial, with continuously high pressure steam to frothing...

Lundi 26 avril 2021

Biomass briquettes, fuel substitues made through the compaction of bio-degradable waste such as sawdust or seed husks. Unlike the primitive hand made briquettes of the past, modern ones are made in special biomass sawdust briquette machine. Materials Used For Biomass Briquette Making...

Lundi 26 avril 2021

Powerful tool in precision positioning with a backlash of less than 0°03' Reduction Ratio of this planetary gear shaft: 1/3-1/100 Backlash: 0.05° (within 3 min) Main features of LFB series Concentric Shaft Planetary Gear Reducer Backlash is within 3 min-perfect solution for precision...

Lundi 26 avril 2021

The LSS series of micro harmonic reducers can be divided into two models depending on the different used harmonic waveform generator: LSS-I (uni-body type wave generator) and LSS-II (cross slider type wave generator). We provide 6 different sizes with 5 kinds of speed reduction...

Lundi 26 avril 2021

Prix : 400 USD

The LSD series is a newly developed strain wave gear/drive series based on the LSS series to fulfil the needs of the market. This type of mini harmonic drive only uses a uni-body type wave generator. Compared with the LSS series, the LSD strain wave gearbox is more compact and thin-walled...

Lundi 26 avril 2021

Rubber sealed deep groove ball bearings have rubber seals installed on one or both sides and are pre-lubricated with grease. rubber sealed deep groove ball bearings with their simple design, high resistance and low-maintenance, while many different retainers are available, pressed...

Lundi 26 avril 2021

Prix : 400USD

The LHT Series of hollow output shaft gearboxes use hat type flex spline. We can divide the LHT drive actuators into 5 versions, LHT-I, LHT-II, LHT-III, LHT-IV and LHT-V. Differences Among Different LHT Hollow Shaft Gearbox: LHT-I: use uni-body type wave generator LHT-II: cross...

Lundi 26 avril 2021

Prix : 400USD

LFS series- this harmonic actuator is a combination product that is lightweight, ultra-flat. It uses cross-roller bearing. LFS integrated series-Combined harmonic reducer with high performance and small motor, with highest input characteristics under the same gear conditions. Applications...

Lundi 26 avril 2021

This automatic vision screen printer is the latest release of our printer. It features the latest machine vision recognition system, adopting highly precise servo motion control to achieve high speed and high accuracy pattern matching. With a core cycle time below 8.5 seconds, our...

Lundi 26 avril 2021

Automatic Pick and Place Machine TronStol A1 is the latest high-precision laser flying mounter developed by our company, which can stably and efficiently mount high-precision components such as 0201 and BGA. Compared with a semi automatic SMT pick and place machine, this automatic...

Lundi 26 avril 2021

Semi Automatic Pick And Place Machine This kind of pick and place machine features a dual head, 25 feeder slots, a vision system, and a flexible positioning system. The manual SMT pick and place machine is suitable for prototyping and small-batch production with stable performance and low cost...

Lundi 26 avril 2021

This kind of SMT pick and place machine features a dual head, 46 feeder slots, vision system, and flexible positioning system. The desktop smt pick and place machine is suitable for prototyping, small batch production with stable performance, and affordable price. Specification of...

Lundi 26 avril 2021

Prix : 100USD

PT series is the special application design by Walson, which adopts high-strength, high-precision, seamless mechanical structure design, and combines with large torque servo power device. It can realize high-speed and precision operation under the payload of 100kg, and better solve...

Lundi 26 avril 2021

Prix : 100USD

PTZ Dual Band Infrared Camera PT series HD features a new high performance 2x/4x optical zoom and thermal lens with autofocus. Compared with the previous generation lens, this new lens technology provides a wider zoom range and better imaging performance in the condition of a completely dark...

Lundi 26 avril 2021

Prix : 100USD

WLS-MDD binocular night vision device is a high-performance pure military head-mounted night vision device, which is designed with reference to the current head-mounted night vision device PVS-31 in the United States. The night working binoculars are divided into two models: low-light...

Lundi 26 avril 2021

Prix : 100USD

WLS-MNW uses a high-performance ultra-second-generation image intensifier, thus greatly improving the visibility and resolving adult-sized targets at a distance of 1-2KM. In the night vision mode, the night field sniper operation can be carried out as long as the use conditions of...

Lundi 26 avril 2021

Prix : 100USD

Protecting cameras from water, the camera housings produced by Walson are all made in accordance with the IP66 standard. Heater and fans are available to provide stable environment for camera work. The housing material will be tested by fog, salty, water, strong light/wind and snow...

Lundi 26 avril 2021

Prix : 100USD

The Walson CTE-Series HD is the most advanced dual-sensor security system, combining a cooled or uncooled 640 × 480 resolution thermal sensor, a 1080p HD visible-light imaging sensor, and a high speed, precision pan/tilt system. The whole vehicle-mounted thermal imaging camera system...

Vendredi 23 avril 2021

1.Introduction Drill pipe screen also called Drill pipe spill, tapered structure, which is used for filtering drilling fluid in the petroleum geology drilling, and protecting the MWDS instrument. Picked up below the kelly bar instead of the joint in use. During the drilling fluid circulation...

Mercredi 21 avril 2021

Quantité : 10000piece - Prix : 1,00 €

100% Bio certified Organic Argan oil in glass bottle with dropper : Min.Order Quantity: 50 Piece/Pieces MOQ for private labeling : 100 Piece Supply Ability: 20000 Liter/Liters per Week Port: FOB Casablanca /Tanger MED / Agadir Payment Terms: L/C,T/T,Western Union,MoneyGram...

Mercredi 21 avril 2021

Quantité : 100000 - Prix : 60~3000 USD

Mechanical Dosing Pump The mechanical metering pump is a motor that drives a worm gear pair to make a variable speed movement through a direct drive. Under the action of a crank connecting rod mechanism, the rotary motion is converted into a reciprocating linear motion. The so-called...

Mercredi 21 avril 2021

TPS24 type Microwave temperature sensor is a high level temperature sensor, very stable performance with very short response time, when you need to upgrade your product performance, this type temperature sensor can meet your demand. Details Material: semiconductor ceramic resistor...

Mercredi 21 avril 2021

Prix : 100USD

Better clarity and WBC, higher telecentricity Especially suitable for round workpiece measurement、 Specification Of Telecentric Illuminator Model Focal Distance (MM) Rated Power (W) Rated Voltage (V) Max Current (MA) Output Light Diameter Φ (MM) WD (MM) WD Tolerance (±mm)...

Mercredi 21 avril 2021

Prix : 100USD

Suitable for low mag lens coaxial lighting, uniform light spot, high brightness Specification Of Point Illumination Model Light Color Main Wavelength (nm) Forward Voltage (V) Forward Current (mA) XF-ADLED1W white 3.2V 350MA XF-ADLED1R gules 630 2.2V 350MA XF-ADLED1B...

Mercredi 21 avril 2021

Prix : 100USD

New series WD range from 49mm to 1405mm, magnification from 0.1X to 1X Smaller size for installation in small space Support to 2/3' C mounting industrial lens Specification Of Non Telecentric Lens Model WD (MM) Magnification (X) Object FOV (MM) Image FOV (MM) DOF (MM) Aperature...

Mercredi 21 avril 2021

Prix : 100USD

Suitable for ITO, particle detection, wafer inspection Infinity optical design can match infinity objective lens with a different mag High-contrast & brightness image solution New modular design allows customizing different optical layouts on customers' requests Specification...

Mardi 20 avril 2021

KC provides metal CNC cutting product manufacturing services, sample L/T 3-7 days, mass production cycle 7-15 days KC can serve customers with CNC machining services for various hardware parts. We have more than 20 precision CNC machining equipment from Korea and Japan, and quickly...

Mardi 20 avril 2021

Quantité : 10000pcs - Prix : 45,00 €

[2 IN 1 DISPLAYS ON WORLD GLOBE]Two displays on one world globe: When light off, you can explore the Earth we live in through the satellite image maps, mountains, rivers, natural wonders and underwater marine topography. When light on, you can know how big the world is through latitude...

Mardi 20 avril 2021

PVC pipe production line is mainly used in the manufacture of the plastic PVC pipe with various tube diameters and wall thickness in the aspects such as the agricultural and constructional plumbing, cable laying etc. This set is composed of the conical twin-screw extruder, vacuum...

Mardi 20 avril 2021

That production line design special, adoption BM separate type efficiently the pole of automating the degree is high, operation convenience, continue to produce, stable dependable. A plastics for producing windpipe material, have heat-proof, bear ageing, the bear environment should dint...