P355M|P355ML1|P355ML2|PRESSURE - 13364 Annonces

Mercredi 24 avril 2024

Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000 pressure-rated ball valve that is small and light. It works best in applications where the temperature range is between -20°F (-29°C) and 450°F (232°C). What Is The Typical Operating Temperature...

Mercredi 24 avril 2024

Class 2500 valves can be used for both on-off and throttling applications. The specific valve type and design will determine their suitability for a particular application. Gate valves class 2500 are often preferred for on-off service, while globe valves class 2500 or class 2500 ball...

Mercredi 24 avril 2024

globe valve class 150 is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal operating...

Mercredi 24 avril 2024

A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at 25 ºC, but only 166 bar at 250 ºC. However, in Carbon Steel A105, it can work up to 255 bar at 25ºC and only 209 bar at 250ºC. What Are The Key Features Of Class 1500 Valves? globe valve...

Mercredi 24 avril 2024

Class 125 valve is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal operating conditions...

Mercredi 24 avril 2024

Check Valve 50mm is a butterfly check valve connected to the pipeline, which can prevent the backflow of the medium and the change of the pipeline pressure. The 50mm brass non return valve is light, compact, and easy to install, and is suitable for flow control of liquid, gas, and...

Mercredi 24 avril 2024

Prix : 10000-40000 RMB/MT

Vibration Silver Plate Sheet Stainless Steel has a textured surface with a silver color. This finish is achieved by using special brushes or rollers to create a pattern of parallel lines. It is commonly used in architectural applications, such as wall panels, elevator interiors, and...

Mardi 23 avril 2024

The digestion vessel is divided into two inner and outer tanks. The inner lining is made of Telfon material and the outer tank is made of 304 stainless steel to prevent tank explosion. Specially used for digestion experiments of insoluble samples and volatile elements in samples....

Mardi 23 avril 2024

1. It looks like just a cleaning device, how does it work? Can directly pour the cleaning solution (soap, inorganic acid, strong acid and alkali, etc.) into the PFA round bucket and soak the vessels. Or cover the container, place it on a hot plate for heating, and use acid vapor to...

Mardi 23 avril 2024

It is designed for various types of three-part syringe barrel.including luer slip, luer lock and dual-structural syringe. (1ml, 2ml, 2.5ml, 3ml, 5ml, 10ml, 20ml, 25ml, 30ml, 50ml, 50ml Catheter Tip, 60ml Catheter Tip, 100ml, 150ml) It consists of three main components: the barrel mold...

Mardi 23 avril 2024

LINKPLUS provide precision molds used in manufacturing of each components of the various syringes such as disposable syringe, Insullin syringe, safety syringe, AD syringe. Including barrel, plunger, gasket. It's customizable according to customer production need. Our syringe mold...

Mardi 23 avril 2024

Quantité : 600,000 pi - Prix : USD2.0--USD10.0

barbecue gas connector used in conjunction with a cylinder valve to deliver an unreduced pressure required for operation of torches burners and furnaces for commercial and industrial applications. Gas Regulator Connector Types There're numerous types of gas regulator connector that IGT supply...

Mardi 23 avril 2024

Quantité : 600,000 pi - Prix : USD2.0--USD10.0

Integrated Gas Technologies(IGT®) is a global gas control equipment company founded 2006 excelling in manufacturing and marketing of LPG cylinder regulators and accessories. Our different types of gas cylinder regulator are of our own design, IPR protected, well surface treated...

Mardi 23 avril 2024

Quantité : 600,000 pi - Prix : USD2.0--USD10.0

Welcome to IGT China, your ultimate destination for all your manometer for gas needs. If you're searching for high-quality gas pressure manometers, look no further. Our extensive range includes top-notch gas manometers for sale, catering to various applications and industries. Whether...

Mardi 23 avril 2024

Quantité : Gas Hose - Prix : 600,000 pieces/month

Integrated Gas Technologies(IGT®) supplies PVC gas hose and Rubber gas hoses which are used to connect fittings, consuming appliances and piping and etc. Each IGT gas extension pipe assembly is tested 100% gas-tight by compressed air at 20bar. Various hose standards can be offered...

Mardi 23 avril 2024

Quantité : 600,000 pi - Prix : USD2.0--USD10.0

Introduction The upper cup contains the universal gas filter. Replacement of the gas filter requires a wrench and is recommended by a professional gas fitter. The lower cup contains a gas pad that absorbs the heavy ends and dirt. This can be unscrewed by hand by the end user and the...

Vendredi 19 avril 2024

Quantité : customized - Prix : USD0.1-15

A mould trial is a process by which a new mould is optimised in order to produce the desired products as efficiently as possible. This makes it one of the most important aspects of injection moulding. DETAIL OF TRIAL MOLDING Trial Molding Process Set barrel temperature according to...

Jeudi 18 avril 2024

The Silicone Peripheral Vessels we provide mainly include Abdominal aorta, femoral artery, femoral profound artery, popliteal artery, external tibial artery, internal tibial artery, peroneal artery, Jugular vein, superior vena cava, inferior vena cava, internal iliac vein, external iliac vein...

Jeudi 18 avril 2024

The Silicone Cardiac Vessels we provide mainly include Coronary Artery, Transcatheter aortic valve replacement (TAVR) Simulation Model, Cardiac Intervention Simulation Model, Right Cardio-Pulmonary Artery, Cardiac Veins, Left Atrial Appendage Vessels, Transseptal Puncture Vessels and so on...

Jeudi 18 avril 2024

SPUTTERING TARGET BONDING Sputtering target bonding is a process that involves attaching a sputtering target to a backing plate or a substrate holder. The bonding process is crucial in ensuring smooth and efficient sputtering operations. The target material is typically bonded to...

Jeudi 18 avril 2024

Pressure Vessel Pressure vessels can be categorized into refrigeration and chemical pressure vessel. A refrigeration pressure vessel usually comprises of six components, namely, cylinder, head, flange, sealing element, opening and nozzle, and support. Similarly, a chemical pressure...

Jeudi 18 avril 2024

Plate Heat Exchanger Plate heat exchanger for refrigeration is a highly efficient phe heat exchange system comprised of a series of metal sheets with a specific corrugated shape. These sheets are arranged to form thin rectangular channels that enable efficient heat exchange. These...

Jeudi 18 avril 2024

PHOSPHATE ESTERS Phosphate esters are a group of organic compounds that are widely used as lubricants, surfactants, and flame retardants, among other applications. These compounds are derived from dibutyl phosphoric acid and s, and their unique properties make them suitable for a...

Jeudi 18 avril 2024

As one of the reliable refractory metal suppliers, Huasheng Metal are keeping a large and comprehensive inventory of the highest quality in form of types of refractory metals such as Powder, Bar, Rod, Sheet, Ingot, Wire and Block, etc., to ensure our customers with fast shipment and...

Jeudi 18 avril 2024

As one of the reliable refractory metal suppliers, Huasheng Metal are keeping a large and comprehensive inventory of the highest quality in form of types of refractory metals such as Powder, Bar, Rod, Sheet, Ingot, Wire and Block, etc., to ensure our customers with fast shipment and...

Mercredi 17 avril 2024

Prix : 1000-6000USD

KRD10 Hydraulic Vertical Shock Test System KRD10 series is a full-automatic hydraulic lifting vertical shock testing machine, with the state-of-the-art design, high degree of automation, simple operation and convenient maintenance. Engineers adopt it to test and measure the shock...

Mercredi 17 avril 2024

Prix : 1000-6000USD

KRD102 Clamping Force Tester KRD102 series clamp force tester is newly developed multi-functional economical carton quality inspection equipment, mainly used for household appliances, furniture, toys, kitchenware and other finished packaging to do clamping test. It can simulate the...

Mercredi 17 avril 2024

Prix : 1000-6000USD

KRD101 Packaging Compression Tester KRD101 series packaging compression tester is the ideal equipment for the compression strength test of various packaging containers with the features of advanced technology, complete functions, reliable performance, easy control and operation...

Mercredi 17 avril 2024

Quantité : 2000 units - Prix : $2000-6000

4 WHEEL ELECTRIC MOBILITY SCOOTER With four wheel design, this four wheel drive electric scooters 's center of gravity is stable and turning will not roll over. When in turning, the mobility scooter electric 4 wheel's whole plane rotates to ensure smoothness and safety. The four-wheel...

Mardi 16 avril 2024

Polydimethylsiloxane PDMS 1.5cst PDMS is a colorless transparent polydimethylsiloxane silicone which has good insulation, high water resistance, high speed shear resistance, high compressibility, high dispersion, low surface tension, low reactivity, low steam pressure, good thermal...