9%MAX - 11615 Annonces

Vendredi 21 décembre 2007

Specification: Mono Input Channels: Balance MIC or Line Input Stereo Input Channel: Balance or Unbalance Stereo Lline Input Frequency Response: 10Hz~30KHz +/-3db 20Hz~20KHz +/-0.5db MIC Sensitivity (22Hz-22KHz): -129.5db, 150 Ohm Source; -132db, Input Short Circuit Gain Adjustable Range...

Dimanche 09 décembre 2007

Dicalcium phosphate DCP Feed/Food/Toothpast grade(%) Phosphate: 18.00% min Calcium: 21.0% min Fluorin: 0.05% max Arsenic: 0.0007% max Cadmium: 0.0007% max Vanadium: 0.0003% max Moisture: 2.0% max Size: 16--40; 40-100Mesh(500um) Appearance: White Powder and White granuler Capacity...

Lundi 26 novembre 2007

SIZE:9CM&UP,10CM&UP,11CM&UP SPECIFICATION: MOISTURE:10%MAX ADMITURE:1% IMPERFECT GRAINS:3% PACKING: 25KG OR 50KG PER NEW PP BAG 12MT PER 20'FCL OR 25MT PER 40'FCLLocalisation : , wangkou town, Personne à contacter : Li Wei,

Lundi 26 novembre 2007

SIZE:9CM&UP,10CM&UP,11CM&UP SPECIFICATION: MOISTURE:10%MAX ADMITURE:1% IMPERFECT GRAINS:3% PACKING: 25KG OR 50KG PER NEW PP BAG 12MT PER 20'FCL OR 26MT PER 40'FCLLocalisation : , wangkou town, Personne à contacter : Li Wei,

Lundi 26 novembre 2007

SIZE: GRADE A(10.5CM&UP,11CM&UP) GRADE AA(12CM&UP) GRADE AAA(12.5CM&UP,13CM&UP) SPECIFICATION: MOISTURE:10%MAX ADMIXTURE:1%MAX IMPERFECT GRAINS:3% PACKING: 25KG OR 50KG PER NEW PP BAG 12MT PER 20'FCL OR 25MT PER 40'FCLLocalisation : , wangkou town, Personne à contacter : Li Wei,

Jeudi 22 novembre 2007

Quantité : 1000000

Features: 1. Powerful single chip ZORAN ZR39160 2. Fully DVB-T/MPEG-2 compliant 3. Demodulation: QPSK, QAM16, QAM64 4. Multi Bandwidth selection: 6M&7M&8M 5. RF modulator for TV standard (optional) 6. Teletext: DVB-TXT ETSI/EN 300 472 7. EPG (Electronic Program Guide) support 8. Favorite...

Mardi 20 novembre 2007

Quantité : 100000 - Prix : USD. 1

Operating speed: 0.01mm to 1m/sec. Mechanically: 240 operations/min. Electrically: 20 operations/min. Contact resistance: 15mmΩ Insulation resistance: 100MΩ(at 500VDC). Dielectric strength: 1,000 VAC, 50/60 Hz for 1 minute betweennon-contenuous terminals. 2,000 VAC, 50/60...

Vendredi 16 novembre 2007

The tile forming line includes in hydraulic decoiler, sheet guiding equipment, roll forming system, cutting-pressing equipment, hydraulic station, electric controlling system, safety cover and supporter. Technical Parameters: Material Spec. Aluzinc, pre-coasted steel Yield strength...

Vendredi 16 novembre 2007

Components for the Machine The tile forming line includes in hydraulic decoiler, sheet guiding equipment, roll forming system, cutting-pressing equipment, hydraulic station, electric controlling system, safety cover and supporter. Technical Parameters: Material Spec. Aluzinc, pre-coasted...

Vendredi 16 novembre 2007

Quantité : 1

Rigid Inflatable Boat HYP520 Product Description Over Length : 520cm Tube Diameter : 52cm Gross Weight : 240KG Max Passenger : 5 Packing Size : 460*180*120cm Floor Type : Double FRP Net Weight : 220KG Over Width : 228cm Air Chamber : 5 OTHER: Rigid Inflatable Boat HYP660 Rigid Inflatable...

Vendredi 16 novembre 2007

Quantité : 1

Rigid Inflatable Boat HYP660 Product Description Over Length : 660cm Tube Diameter : 52cm Gross Weight : 950KG Max Passenger : 8 Packing Size : 580*180*150cm Floor Type : Double FRP Net Weight : 900KG Over Width : 228cm Air Chamber : 5 Max Engine : 150HP OTHER: Rigid Inflatable Boat...

Jeudi 15 novembre 2007

Quantité : 2000 MT

Monsieur, Madame, Nous cherchons la semoule de blé pour la fabrication des pâtes alimentaires aux caractéristiques suivantes: - Humidité 14 PCT max - Protéine 13 PCT min - Taux de cendre 0.5 min - 0.90 max - Gluten 30 PCT min - Tamis 200 à 350 micron Si vous disposez le produits demandé...

Mardi 13 novembre 2007

Product name:JQ-2369 fat consumption pedometer Functions:LCD/time/steps/max/step display/calculate fat consumption/calculate calorie consumption upon stature/weight/step distanceLocalisation : Moonland building Hua Fan RD.Dalang Lunghua Shenzhen China, 518109 Shenzhen, Personne à contacter ...

Samedi 10 novembre 2007

We are pleased to inform you that we are sublimation transfer paper producer width 160cm(63inches) also our special dds system enable max width up to 320cm(126inches) We are at your service with our technical personnel & design service at all times .We are looking forward hearing...

Samedi 10 novembre 2007

We provide Auto Body Repair Machine - Frame Machines. Enjoy the following features: 1. Easy-moving towers, with powerful and reliable hydraulic system 2. Movable cross-members on both ends, enable workers to approach repairing cars the closest 3. Lifting platform optional 4. Super...

Vendredi 09 novembre 2007

Quantité : 2000pcs

Features: 1) Control system: DSP 2) Work size: 600 x 1,200mm 3) Laser tube type: CO2 sealed glass 4) Laser power: 100W 5) Max. speed: 800mm/s 6) Software resolution: 2,500DPI 7) Software: Easycut 4.0 laser engraving system 8) Image form: HPGL, DXF, BMP, DST 9) Driver type: stepper...

Vendredi 09 novembre 2007

Quantité : 2000pcs

Features: 1) Control system: DSP 2) Work size: 600 x 900mm 3) Up and down plate: 260mm adjustable 4) Laser tube type: CO2 sealed glass 5) Laser power: 60W 6) Max. speed: 800mm/s 7) Software resolution: 1,000DPI 8) Software: Easycut 4.0 laser engraving system 9) Image form: HPGL, DXF...

Vendredi 09 novembre 2007

Quantité : 2000pcs

Standard Feature: Control system: DSP Work size: 918mm x 1224mm with double side open door Laser tube type: CO2 Sealed glass Laser power: 80W Max speed: 800mm/s Software Resolution: 1000DPI Software: Easycut 4.02 Image form: hpgl, bmp, tif, jpg, dxf, dst, ai Driver type: Micro Stepping...

Mardi 06 novembre 2007

Quantité : 2000pcs

Standard Feature: Control system: DSP Work size: 510mm x 714mm with double side open door Up and down work plate: optional Laser tube type: CO2 Sealed glass Laser power: 50W Max. speed: 800mm/s Software Resolution: 1000DPI Software: Easycut 4.02 Image form: HPGL, BMP, TIF, JPG, DXF...

Mardi 06 novembre 2007

Quantité : 2000pcs

Standard Feature: Control system: RISC Work size: 305mm x 305mm Laser tube type: CO2 Sealed glass Laser power: 40W Max speed: 400mm/s Software Resolution: 1000DPI Software: Easycut 2.0 laser engraving system Image form: hpgl, bmp, tif, jpg Driver type: Micro Stepping Motor Packing...

Mardi 06 novembre 2007

Quantité : 2000pcs

Features: 1) Control system: DSP 2) Work size: 900 x 1,500mm 3) Laser tube type: CO2 sealed glass 4) Laser power: 80W 5) Max. speed: 800mm/s 6) Software resolution: 2,500DPI 7) Software: Easy cut 4.0 laser engraving system 8) Image form: HPGL, DXF, BMP, DST 9) Driver type: stepper...

Lundi 05 novembre 2007

Quantité : 2000pcs

Standard Feature: Control system: DSP Work size: 612mm x 1224mm with double side open door Laser tube type: CO2 Sealed glass Laser power: 60W Max speed: 800mm/s Software Resolution: 1000DPI Location precision: Localisation : 218 Section F-2, Pioneer Square,Qilu Soft Park No.1 Shunhua Road...

Samedi 03 novembre 2007

SD-296 punching capacity:25papes(80gsm) Heavy-duty Plastic Comb Binding punching size:3*8mm margin size:2、4、6、8mm pitch:14.25mm max binding capacity:from 6mm(1/4 dimension:426*422*213mm N.W.:11kg max binding length:Less than A4 paLocalisation : NO.38 HUOJU ROAD...)

Samedi 03 novembre 2007

Quantité : 5000 - Prix : US$1500

A. Descriptions/Specifications 1. The frame is made of powder-coated steel with leather mattress 2. 8”*2 foam front wheel and 12” PU rear wheel 3. Detachable armrest and footrest 4. Imported manual controller and motors 5. Safe capacity: 0-150kgs 6. Motors: 160w*2,rechargeable 7. Voltage...

Samedi 03 novembre 2007

Quantité : 1500MT/mon - Prix : 100,00 €

Mica Powder:10mesh 20mesh, 40mesh, 60mesh,100mesh, 325mesh . Mica Flakes: 1-2mm, 2-3mm, 3-5mm. Note: The size should be adjusted according to customer’s demands. Data for reference: Element: SiO2 Al2O3 Fe2O3 K2O MgO CaO Sand Density Content %: 44-50 20-33 2-6 9-11 0.32-2 0.02-0.77 2...

Samedi 03 novembre 2007

Features: 1) Control system: DSP 2) Work size: 500 x 700mm 3) Up and down plate: 260mm adjustable 4) Laser tube type: CO2 sealed glass 5) Laser power: 50W 6) Max. speed: 800mm/s 7) Software resolution: 1,000DPI 8) Software: Easycut 4.0 laser engraving system 9) Image form: HPGL, DXF...

Samedi 03 novembre 2007

Quantité : 2000pcs

Features: 1) Control system: DSP 2) Work size: 600 x 1,200mm 3) Laser tube type: CO2 sealed glass 4) Laser power: 80W 5) Max. speed: 800mm/s 6) Software resolution: 2,500DPI 7) Software: Easycut 4.0 laser engraving system 8) Image form: HPGL, DXF, BMP, DST 9) Driver type: stepper...

Samedi 03 novembre 2007

Quantité : 2000pcs

Features: 1) Control system: DSP 2) Work size: 900 x 1,500mm 3) Laser tube type: CO2 sealed glass 4) Laser power: 100W 5) Max. speed: 800mm/s 6) Software resolution: 2,500DPI 7) Software: Easy cut 4.0 laser engraving system 8) Image form: HPGL, DXF, BMP, DST 9) Driver type: stepper...

Vendredi 02 novembre 2007

Quantité : 2000pcs

Standard Feature: Control system: DSP Work size: 24" x 36" (612mm x 918mm) with double side open door Up and down work plate: optional Laser tube type: CO2 Sealed glass Laser power: 60W Max speed: 800mm/s Software Resolution: 1000DPI Software: Easycut 4.02 Image form: hpgl, bmp, tif...

Vendredi 02 novembre 2007

Quantité : 2000pcs

Standard Feature: Control system: 32 BIT DSP Memory: 32M flash memory on main board Work size: 12" x 20" (305mm x 508mm) with double side open door Up and down work plate: 8" (200mm) Laser tube type: CO2 Sealed glass Laser power: 50W Max speed: 800mm/s Software Resolution: 1000DPI Software...