SHAFT - 3302 Annonces

Jeudi 08 décembre 2022

Quantité : 10000pcs / - Prix : USD 130 - USD 980

HMHG-IV series flex spline belongs to the hollow flanging standard structure. The wave generator cam has its own Input shaft and there is a support bearing inside the reducer The reducer is fully sealed and easy to install, especially suitable for the situation where there is a need...

Jeudi 08 décembre 2022

Quantité : 10000pcs / - Prix : USD 130 - USD 980

HMHG-V Series with hat-combination standard structure. The input shaft can connect with the motor directly. The cable can go through the low-speed hollow shaft Encoder can be installed on both input and output shafts Especially for Cobot and Joint modular Features of HMHG-V Unit (Hollow ...)

Jeudi 08 décembre 2022

Quantité : 10000pcs / - Prix : USD 130 - USD 980

HMCG-I consists of three basic components: flexible gear, rigid gear, and wave generator. The flexible gear is a cup-shaped standard structure, and its input shaft directly cooperates with the inner hole of wave generator and connects with it through flat key or fastening screw."...

Jeudi 08 décembre 2022

Quantité : 10000pcs / - Prix : USD 130 - USD 980

HMCG-II-E series flex spline is a cup-shaped standard structure, input shaft connects with the wave generator inner hole directly fixed through a flat key connection. Generally, the circular spline is fixed, and the flex spline is connected to the output end. Features of HMCG-Ⅱ-E...

Jeudi 08 décembre 2022

Quantité : 10000pcs / - Prix : USD 130 - USD 980

HMCD is Ultra-flat harmonic drive china, with characteristics as compact and lightweight, input and output coaxial, excellent positioning accuracy and rotation accuracy. HMCD Series Harmonic Drive Cup Type List HMCD-Ⅱ Unit (Super Flat) Series Harmonic Drive HMCD-II is a highly compact...

Jeudi 08 décembre 2022

Quantité : 10000pcs / - Prix : USD 130 - USD 980

Through big data modeling, simulation optimization and performance verification, Han's Motion team realizes the optimal design of tooth profile, breaks through barriers of experience accumulation and correction in transmission design, and continuously improves and innovates in the...

Mercredi 07 décembre 2022

Permanent magnet AC synchronous motor is a further development of permanent magnet direct drive system, which integrates permanent magnet AC synchronous motor with belt conveyor drive drum and truly realizes mechatronics. The VFD compatible motor not only inherits the advantages of...

Jeudi 01 décembre 2022

Conventional Lathe is perfectly suitable for small volume production plant and machinery maintenance shops and can machine a wide range of materials. Features of Conventional lathe machine The machine is a one-piece casting because the bed is cast as a whole, the guide rail of the...

Jeudi 01 décembre 2022

Conventional Double Column Vertical Lathe, Regarding the column heightening model, there is a double sliding column system. The cross beam can move up and down to achieve better cutting accuracy. We have several models to be selected for the best cutting need. Features of Conventional...

Jeudi 01 décembre 2022

From the vertical type and horizontal type to gantry type, Sealion Machine Tool offers you a wide range of CNC Machining center China. With our hard-working design engineers, we always keep our best machining center above other manufactures. Those machines are widely used in mold processes...

Jeudi 01 décembre 2022

Walkson provides various valve components through casting and forging, including pressure relief valve components, hydraulic valve components, flow control valve. control valve components, etc. Check Valve Walkson provides castings or forgings for check valves, include Valve Body...

Mercredi 30 novembre 2022

Endoscopic Linear staplers are Mechanical staplers that cannot cut but staple the tissues. Victor Medical, as one of the most professional manufacturers and suppliers of endoscopic linear cutting staplers and laparoscopic staplers in China, can provide you with high-quality and high-precision...

Mercredi 30 novembre 2022

The structure of the mid ebike motor is much more complicated than midhub motor. Mid motor also requires clutches, drive shafts, and other components. The power is output to the rear wheels. It is directly connected to the cranks and gears, which can get more power. Features of Shengyi...

Mardi 29 novembre 2022

Features of Cassava Flour Milling Machine Processing Capacity: 400-500kgs/hour Application Scope: Milling the coarse powder into fine powder Product Introduction: cassava milling equipment, cassava milling machine, cassava miller for cassava flour and garri processing Product Description...

Samedi 26 novembre 2022

Quantité : 2-10 units - Prix : 2 million-50 million

As one of the professional drying oven manufacturers in China, RUIYUAN continues technological innovation to create the best value for all customers and provides a suitable price for drying oven industrial. RUIYUAN's conventional oven for drying is mainly used to dry after the metal...

Samedi 26 novembre 2022

Quantité : 2-10 units - Prix : 2 million-50 million

Our pile turner are mainly for metal printing and coating. The working platform is plate type or drum type, easy for loading and unloading stackers. Pile turner machine can handle metal sheets up to a maximum size of 1143(mm)×965(mm) and stack weights up to 3,600 kg, and suitable...

Jeudi 24 novembre 2022

TY203 series servo hydraulic press and CNC hydraulic press are independently developed and designed by Ningbo Tianyu Machinery Equipment Co., Ltd. with independent intellectual property rights. The servo hydraulic press machine adopts the imported touch screen for data input and data display...

Jeudi 24 novembre 2022

This is a high-end CNC drilling machine for panel furniture, which has the advantages of high processing efficiency and a high degree of automation. The servo electric press china can realize six-side position processing and front and back groove processing at a time. TY10 series...

Jeudi 24 novembre 2022

TY502 is the equipment independently developed by Tianyu Machinery Equipment Co., Ltd. It can detect whether the interference between components is fully in line with the design to prevent the products with unqualified fit clearance from entering into the next process. CNC hydraulic...

Mercredi 23 novembre 2022

Rectangular splines are mostly six splines. This type of spline is better than a single key and can withstand greater torque. It is convenient for various screw elements to be mounted on the mandrel. The mandrel material is also a 40CrNiMoA forging of alloy structural steel. Quench...

Mercredi 23 novembre 2022

The 22 spline shaft type is divided into single-key , rectangular spline and involute spline. Materials can be selected from China, Germany and Japan made. The standards for splines has Chinese standard, German DIN5480 (or DIN5482) and Japanese standard. Currently the maximum length...

Mercredi 23 novembre 2022

Splined Shaft Application The involute shaft is the form of mandrel splines used by all the twin screw extruders over the world. The involute spline shaft standards are Chinese GB standard, German DIN5480 (or DIN5482) and Japanese standard. The design of the involute 6 spline shaft...

Mercredi 23 novembre 2022

TBM cutter disc is a disc-shaped roller cutter mounted on the cutterhead of tunnel boring machine, which is an excavation tool for breaking hard rocks. The disc cutters can be mounted on the cutter heads of large trenchless construction equipment such as shield machines, TBMs, pipe...

Mardi 22 novembre 2022

Prix : US $10-500/ Piece

Butterfly valves whose stem axis deviates from the center of the disc and the center of the body at the same time, and the sealing pair is an oblique cone are called eccentric sealed butterfly valves.The eccentric butterfly valve and the upper and lower valve shafts are connected...

Samedi 19 novembre 2022

The LHT Series of hollow output shaft gearbox use hat type flex spline. We can divide the LHT drive actuators into 5 versions, LHT-I, LHT-II, LHT-III, LHT-IV and LHT-V. Differences Among Different LHT harmonic reducer: LHT-I: use uni-body type wave generator LHT-II: cross slider...

Vendredi 18 novembre 2022

Crane Rope Drum is a part of crane lifting mechanism which is used to full in, entwine, and store wire rope. The crane drum has consisted of drum shaft, flange type annular gear, drum hub, bearings, bearing pedestal, etc. The material of the crane hoist drum is usually no less than...

Jeudi 17 novembre 2022

Quantité : 1000pcs

HOTEC is one of the leading companies and suppliers of different public equipment for a more convenient, effective and high-quality life. The Wall Mount Hair dryer from HOTEC dries hair fast with high drying power in this compact dryer, two speed position for people to choose. Comes...

Samedi 12 novembre 2022

FMY Series automatic thermal lamination machine adopts the environmental protection laminating process and operates simple, less investment, easy to use, whether it is mass production or a small amount of film, can be used easily, and now widely used in the market. 1. Adopt a high-speed...

Jeudi 10 novembre 2022

Prix : 100USD

After CNC milling or CNC turning forming, the surface roughness and behavior tolerance requirements of products are completed by cnc grinding, and the maximum dimension tolerance can reach ± 0.001mm. CNC Grinding Capabilities 1. The technology of cnc china precision machining is combined...

Jeudi 10 novembre 2022

Prix : 100USD

CNC boring is used for the shaft sleeve in the transmission shaft of large equipment, and the tolerance of the bearing position is +0.03mm. After welding the accessories, use CNC horizontal boring and milling equipment to process both sides with a concentricity of 0.05mm. CNC Boring...