COMPOUNDS - 1996 Annonces

Vendredi 22 avril 2022

Quantité : 300m-350m/ - Prix : 100USD

The extruder open screw barrels are used in the feeding section, the natural exhausting section and the vacuum exhausting sections. Depending on the materials produced, the placement of the open barrel is different. The opening shapes of extrusion screw barrel can be square, rectangular...

Vendredi 22 avril 2022

Quantité : 300m-350m/ - Prix : 100USD

Extruder barrels plays an importante role inside extruder. Barrel and screw elements are corporated each other to support extruder process smoothly. There is both a feed barrel for the main feed and a extruder barrel for top-head degassing. Technical Data of Extruder Feed Barrels Brand：LESUN...

Vendredi 22 avril 2022

Quantité : 300m-350m/ - Prix : 100USD

Twin Screw barrel Diameter: φ20 mm ~φ300 mm Twin Screw barrel Properties: Wear-resisting, Corrode-resisting, Durable Nanjing Lesun Screw Co.,Ltd specialize in the manufacture of parallel co-rotating modular Barrel, involving various types of twin screw barrel ranging from Ø20mm to Ø300mm...

Vendredi 22 avril 2022

Quantité : 300m-350m/ - Prix : 100USD

Extrusion barrel plays an importante role inside extruder. Barrel and screw elements are corporated each other to support extruder process smoothly. Extruder side open barrels have opening both at the top and side . The upper opening is for venting purposes. Technical Data of Extruder...

Vendredi 22 avril 2022

Quantité : 300m-350m/ - Prix : 100USD

WITH REGARD TO PRODUCTION SPECIFICATIONS, LESUN NOT ONLY OFFERS STANDARD TWIN SCREW EXTRUDER PARTS MADE BY GENERAL SCREW EXTRUDER MANUFACTURER, BUT ALSO PROVIDES SPECIAL-PURPOSE feed screw design AND MANUFACTURING SERVICE ACCORDING TO YOUR REQUIREMENTS. MEANWHILE, WE ALSO PROVIDE...

Mercredi 20 avril 2022

What Is Meant By Types of API in Pharma? Short for Active Pharmaceutical Ingredient, API mainly refers to the active ingredient of the drug, which is also the basis of the pharmacological action of the drug. API is a pharmaceutically active substance prepared by chemical synthesis...

Mercredi 20 avril 2022

Quantité : 500tons - Prix : USD0.015-----USD100

Brief introduction of isotropic rubber magnet(magnetic rubber): Rubber magnets sometimes called magnetic rubber. Magnetic rubber itself has no magnetism , the magnetism comes from filled magnetic powder. So the magnetic powder is obligate material for produce magnetic rubber. Magnetic...

Samedi 16 avril 2022

LEFOO differential pressure transmitter at the pressure ranges of 0～±100Pa, 0～±1,000Pa, and 0～±10,000Pa.LCD digital display 25+ years manufacturing Expert, Contact LEFOO to get the Best differential pressure transmitter price BRIEF INTRODUCTION OF LEFOO DIFFERENTIAL PRESSURE TRANSMITTER...

Samedi 16 avril 2022

BRIEF INTRODUCTION OF LEFOO DIFFERENTIAL PRESSURE TRANSMITTER Versatile LFM108 differential pressure transmitter ranges from 0~ +50 Pa to 0~ +10 KPa. And customized 34 kpa measuring span is available (HVAC compressor with differential pressure sensor HVAC, low-pressure end of gas...)

Samedi 16 avril 2022

Quantité : 1 million - Prix : US$100-US$5000

NRL4 R-4 OTR Tire 18.4-26|14.5 75 20|12.5/80-18 NRL4 is a pattern of backhoe tires for sale specifically designed for backhoe loaders and compact loaders, and is engineered to deliver great traction, improved durability and excellent self-cleaning properties. Features Of NRL4 OTR Tires 1...

Samedi 16 avril 2022

Quantité : 1 million - Prix : US$100-US$5000

UTST E-2 OTR Tire 14.00 r24|14.00R25|16.00R25 UTST is a crane tyres tread pattern and is designed to be suitable for both on-highway and off-highway uses. UTST is engineered with tough architecture and a versatile tread to meet the needs of cranes and to reach a balance of good traction...

Samedi 16 avril 2022

Quantité : 1 million - Prix : US$100-US$5000

NRL4 R-4 OTR Tire 18.4-26|14.5/75-20|12.5 80 18 NRL4 is a pattern of backhoe tires for sale specifically designed for backhoe loaders and compact loaders, and is engineered to deliver great traction, improved durability and excellent self-cleaning properties. Features Of NRL4 OTR Tires 1...

Samedi 16 avril 2022

Quantité : 1 million - Prix : US$100-US$5000

UTPT IND-5 OTR Tire 12.00 r 24|14.00R24|18.00R25 UTPT is a telehandler tires pattern designed with reinforced architecture, improved heat dissipation and wear resistance for port handling equipment that requires the tires to go through thousands of round trips over abrasive surfaces each day...

Mercredi 13 avril 2022

Quantité : 50000pcs - Prix : 100-60000

TBM disc cutter is a disc-shaped roller cutter mounted on the cutterhead of tunnel boring machine, which is an excavation tool for breaking hard rocks. The disc cutters can be mounted on the cutter heads of large non-excavation construction equipment such as shield machines, TBMs...

Mardi 12 avril 2022

Main structure features of EPS Panel Machine 1) This EPS sandwich panel making machine has the specification: nice appearance, low noise and high efficiency. 2) The EPS sandwich panel production line is welded by H-beam with shot blasting treatment on the surface, so the whole structure...

Samedi 09 avril 2022

Quantité : 100-300 to - Prix : 4-10 USD

Rosun chlorine powder disinfectant is an advanced oxidation technology basing on sulfate radical [SO4-], using potassium monopersulfate compound powder(2KHSO5.KHSO4.K2SO4)as its active ingredient, by using high-energy activation technology to produce active oxygen [O] through the...

Samedi 09 avril 2022

Quantité : 100-300 to - Prix : 4-10 USD

Rosun water disinfectant powder is an advanced oxidation technology basing on sulfate radical [SO4-], using potassium monopersulfate compound powder (2KHSO5.KHSO4.K2SO4)as its active ingredient. By using high-energy activation technology to produce active oxygen [O] through the chain...

Samedi 09 avril 2022

Quantité : 100-300 to - Prix : 4-10 USD

Rosun has been Roxycide™- A Broad Spectrum and Efficacy Disinfectant Roxycide™is a concentrated disinfectant powder that can be mixed with water, to form a powerful disinfecting solution. The triple salt and sodium chloride compound complexed with a surfactant generates high levels...

Jeudi 07 avril 2022

After CNC milling or CNC turning forming, the surface roughness and behavior tolerance requirements of products are completed by CNC grinding, and the maximum dimension tolerance can reach ± 0.001mm. CNC Grinding Capabilities 1. The technology of cnc china machining is combined...

Jeudi 07 avril 2022

Quantité : 100-100000

What is Cable Harness A wiring looms and harnesses also referred to as a wire harness, wiring assembly, cable assembly or wiring loom, is an assembly of electrical cables or wires which transmit signals or electrical power. The cables are bonded together with a durable material such as vinyl...

Dimanche 03 avril 2022

Industrial centrifugal dryer integrates separating, drying, sterilization, with perfect seal system, absolute security and is particularly suitable on high potency compounds, pharmaceutical output stages, highly toxic products, application methods, agents that have to be manufactured...

Dimanche 03 avril 2022

SAIDELI-PROFESSIONAL CENTRIFUGE MACHINE MANUFACTURER Jiangsu Saideli continuously develops high-tech and top-quality products which include Industrial Centrifuge Separator, Industrial Centrifugal Dryer, Industrial Filter. As an industrial centrifuge machine manufacturer, Saideli...

Vendredi 01 avril 2022

Hipro's competitiveness over our automated immunoassay analyzer, one of the types of point of care testing, is rooted in our self-innovated key technologies, an acute sense of cutting-edge technology, an excellent management team, and a strict quality control system. As a professional...

Mardi 29 mars 2022

Sodium silicate is a generic name for chemical compounds with the formula Na2SiO3. This material is generally colorless transparent solids, or in white powder, non toxic and non-inflammable. It is suluble in water in various amount. A more common name for sodium silicate is water glass...

Samedi 26 mars 2022

As a new material, soft magnetic compound can be used for extrusion or injection molding and are especially suitable for high-frequency high-speed stator, 5G base station, transformer skeleton applications, it is helpful for the device to be small and lightweight, to reduce energy...

Samedi 26 mars 2022

High density and metal bonded plastic functional composite materials with complex and delicate structures can also be prepared by the injection molding process. Density can be adjusted as required from 2-13 g/cm3, which can replace some traditional aluminum alloy, zinc alloy, stainless steel...

Samedi 26 mars 2022

We can provide customers with appropriate mold design scheme (magnetic circuit design and mold-flow analysis) and optimization processing parameter based on the material characteristics to obtain the best performance of the material, we also cooperate with our customer to analyze...

Samedi 26 mars 2022

Hybrid Bonded Magnetic Compounds Introductions： By mixing different kinds of magnetic powder in different proportions, we can obtain a series of hybrid magnets whose magnetic properties are higher than ferrite bonding magnet and lower than bonded neodymium (anisotropic) magnet,...

Samedi 26 mars 2022

High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc. Properties...

Vendredi 25 mars 2022

Quantité : 500kg

The silicone busbar insulation coating is made from special silicone rubber, high-performance material and other polymers by polymer blending technology. Its basic structural unit is silicon - oxygen chain while its side chain is connected by silicone with another organic radical group...