COMPOUND - 1996 Annonces

Mercredi 08 juin 2022

BMC Auto Parts Mould Automobiles are different in size and shape. That means automobile suppliers always need flexible auto parts molds, once there occurs a new model of automobile. Over 90% of auto parts production depend on mold. BMC car parts and SMC auto parts molds enable massive...

Mercredi 08 juin 2022

Auto Parts Description SMC auto parts made from sheet molding compound (SMC) are typically 25-35% lighter than steel parts and aluminum products of the same strength. The stroke is increased and the fuel consumption is greatly reduced. Aobang provide bmc composite, smc motor factors...

Mercredi 08 juin 2022

Cars, buses, trucks, transport and special vehicles • Weight: Parts made from sheet molding compound (automotive smc) are typically 25-35% lighter than steel parts and aluminum products of the same strength. The stroke is increased and the fuel consumption is greatly reduced. • Stable shape...

Samedi 28 mai 2022

Hybrid Bonded Magnetic Compounds Introductions： By mixing different kinds of magnetic powder in different proportions, we can obtain a series of hybrid magnets whose magnetic properties are higher than ferrite bonding magnet and lower than bonded neodymium (anisotropic) magnet, which...

Samedi 28 mai 2022

High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc. Properties...

Samedi 28 mai 2022

Magnets and magnet assemblies have to meet increasingly complex requirements. Hard-Ferrite Bonded Magnetic Compounds Compared to rare earth magnetic materials, hard ferrites has obvious cost advantage due to the use of cheap strontium oxide, barium oxide and iron oxide as raw materials...

Samedi 28 mai 2022

Light density and low cost of ferrite bonded magnetic compounds (hard ferrites magnets) create a high-cost performance. Therefore, it has the largest market demand and is the most extensively used in the field of modern home appliances, office supplies, communication devices, and defense...

Samedi 28 mai 2022

Introduction SmFeN magnetic material uses abundant rare-earth Sm element instead of expensive elements of Nd, Dy, Co, etc, and is the most cost-effective rare earth permanent magnetic material. Compared with the bonded neodymium magnet, the bonded SmFeN magnet has higher magnetic...

Samedi 28 mai 2022

Bonded Neodymium Magnetic Compounds Introductions Bonded neodymium magnets (bonded NdFeB magnet) has high mechanical performance and no need for surface coating and other processes, which can effectively avoid the shortcomings of brittle and poor corrosion resistance of sintered NdFeB magnet...

Jeudi 26 mai 2022

CRYSCORE can offer Epi-Ready grade sapphire wafer with a very low surface roughness in complete orientation options. C plane sapphire wafers are being extensively used for epitaxial growth of III-V and II-VI compounds, such as gallium nitride (GaN), aluminum nitride (AlN), for bright...

Jeudi 26 mai 2022

Due to the less mismatched lattice and stable chemical and physical properties, sapphire(Al2O3) wafer is the popular substrates for III-V nitrides, superconductor and magnetic epi-film. They are widely used in GaN and thin-film epitaxial growth, silicon on sapphire, LED market and...

Mercredi 25 mai 2022

From the vertical type and horizontal type to gantry type, Sealion Machine Tool offers you a wide range of CNC Machining center China . With our hard-working design engineers, we always keep our best machining center above other manufactures. Those machines are widely used in mold processes...

Mercredi 18 mai 2022

Prix : different products o

The PCB loader and unloader machine have a stable design of the casting lifting table structure, which improves the stability of the equipment. The control system with independent intellectual property rights, multi-functional electrical circuits and programming, and stable performance...

Mercredi 18 mai 2022

Quantité : 200 pcs pe - Prix : 1~1000 usd per pc

Two crank hospital bed is also called double crank hospital bed. The main function of the 2 crank of this hospital manual bed is its back adjustment and leg adjustment. 2 crank bed can add on bed infusion pole and over bed tables and other related basic configurations. Parameter of...

Mercredi 18 mai 2022

Quantité : 200 pcs pe - Prix : 1~1000 usd per pc

3 crank manual hospital bed for hospital use is also called three functions manual nursing bed. The main function of the hospital bed 3 cranks is its back adjustment, leg adjustment and height adjustment. Three crank hospital bed can add on-bed infusion poles and over-bed tables and...

Mercredi 18 mai 2022

An interesting Fact: about 7 billion people have googled about CBD and THC in the past 5 years. Still, there are a lot of those who aren't aware of what CBD is, and its benefits. Currently, in India CBD is legal. It is also excluded from the banned substance list by the WADA (World...)

Mercredi 18 mai 2022

Quantité : 15000 piec - Prix : $5-100

Cheap essential oils bulk are concentrated plant extracts. They're made by steam distillation or CO2 extract various parts of a plant (flowers, bark, leaves or fruit) to capture the compounds that produce fragrance. In addition to creating scent, essential oils perform other functions...

Mercredi 18 mai 2022

Quantité : 15000 piec - Prix : $5-100

Kaiping healthwise health food co ltd natural botanical extracts are produced by extracting various plants' effective chemical constituents out of their different part using different solvents (as water, ethanol,co2, etc), Each one is standardized to guarantee consistency between batches...

Mercredi 11 mai 2022

Quantité : 5000 - Prix : USD0.1-15

Industrial heat shrink using high-quality polymers, scientific formula, mechanical co-mixing polymer alloy, product molding after the electronic accelerator irradiation crosslinking, continuous expansion. Products with environmental protection, soft, flame retardant, fast shrinkage...

Mercredi 11 mai 2022

Quantité : 5000 - Prix : USD0.1-15

heat shrink tubing 3 to 1 using high-quality polymers, scientific formula, mechanical co-mixing polymer alloy, product molding after the electronic accelerator irradiation crosslinking, continuous expansion. heat Shrink tubing 3 to 1 products with environmental protection, soft, flame retardant...

Mercredi 11 mai 2022

Prix : 1-50000000

Stamping Die Parts Custom Stamping Metal Products Stamping and Bending Parts Precision compound die stamping is a method for cutting and forming metal into a specified shape after a series of stamping die process. As one of the metal die manufacturers, we offer metal stamping dies...

Mardi 10 mai 2022

Prix : 95,00 €

1. Strong R&D capability and comprehensive product line 2. The company's main equipment includes 60 German-imported Karl Mayer HKS3 high-speed warp knitting machines, electronic automatic control high-speed warping machines, bonding fabrics 4 high-speed stretch yarn machines,...

Mardi 10 mai 2022

Jinpo bicycle master cylinder are of omfortable hand feeling, ergonomic design, fine-tune the brake knob for easy adjustment of brake force; Master cylinder in bikes are of expansion and rotation to adapt to different grasping feelings; Quality cylinder of bike is hexagon socket fixed...

Samedi 07 mai 2022

As we all know, the best on road off road tyres and off road tyres on road must deliver excellent traction and dependability in tough off-road conditions. Customers will be trusted on a supplier who can provide leading value alternative tire in the on / off-road segment. Over 20 years'...

Vendredi 06 mai 2022

A single die is generally composed of one or more concave dies and a convex dies, which refers to completing the process in a stamping stroke only in one station. Orienson's Single Die A single mould can be divided into single punch press, bending die, drawing die, plunging die, and integral die...

Samedi 30 avril 2022

Quantité : 5000 sets - Prix : USD5,000.00-USD3,000

Main structure features of EPS Sandwich Panel Machine 1) This EPS sandwich panel making machine has the specification: nice appearance, low noise and high efficiency. 2) The EPS sandwich panel production line is welded by H-beam with shot blasting treatment on the surface, so the...

Jeudi 28 avril 2022

Mixing Silicone Rubber Usage: it can be used for pressing buttons, o-ring, sealing gasket, shaft seal, rubber roller etc. Packaging and shipping: the product adopts double corrugated carton packaging, net content 20 kg per piece. Please store in a cool, ventilated and dry place...

Jeudi 28 avril 2022

Name: Methyl Vinyl Silicone Rubber Feature: High temperature resistant Appearance: Colorless and transparent, no obvious mechanical impurities Application of Methyl Vinyl Silicone Rubber ZT-110 Methyl Vinyl Silicone Rubber can be widely used in various fields of silicone compounds...

Jeudi 28 avril 2022

Surfaces that are directly touched by the skin, notably the hand, can be a source of transmission to everyone. Frequently touched surfaces can become increasingly contaminated and have a greater risk of transmission if no remedial action such as disinfecting surfaces is taken to reduce...

Vendredi 22 avril 2022

Quantité : 300m-350m/ - Prix : 100USD

Rectangular splines are mostly six splines. This type of spline is better than a single key and can withstand greater torque. It is convenient for various screw elements to be mounted on the mandrel. The mandrel material is also a 40CrNiMoA forging of alloy structural steel. Quench...