DEVICE - 13814 Annonces

Samedi 11 novembre 2017

Heat mirrors and cold mirrors are special bandpass filters that can reflect infrared light and ultraviolet light and only allow visible light to pass through, also known as heat-absorbing filters, also known as IR cut filters. Heat Mirror will be a large number of heat generated near-infrared...

Samedi 11 novembre 2017

Quantité : 1 set - Prix : 1 usd per set

Digital Elmendorf Tearing Tester Standards: ASTM D1424/D689, NEXT 17, M&S P29, BE EN ISO 13937/4674, BS 4468, DIN EN 21974, GB/T 3917.1, ISO 1974 Applications: Digital Elmendorf Tearing Tester is used for determining the tear strength of fabrics, non-woven, paper, cardboard...

Mercredi 08 novembre 2017

Quantité : 4500 tons - Prix : 2 500,00 €

3003 aluminum coil is commonly product in the 3000 series of Al-Mn alloy. Because of the addition of manganese in the alloy, it has excellent rust resistance. Therefore, the 3003 aluminum coil is the most widely called antirust aluminum. As one of the representative products of Mingtai Aluminum...

Dimanche 05 novembre 2017

PLC electric control system is safe and reliable. Pneumatic balance device for slide block to ensure the stability and precision of the machine tool. Hydraulic overload protection for JH21, rigid protective device for JF21 to prevent damage due to overload in operation. website: http://www...

Dimanche 05 novembre 2017

1. The design of the guillotine shear conform to EU international standards. The fuselage eliminates internal stress by annealing and vibration, ensuring higher precision and strength.We use SOLID WORKS 3D programming to design all porducts and made with enhanced ST44-1 quality steel...

Samedi 04 novembre 2017

The small high efficiency air filter test device is a highly targeted filter test equipment, based on the "European standard EN1822-5: 2000 determining the efficiency of filter element " principle, but in line with the domestic industry on the finished product filter, filter material...

Samedi 04 novembre 2017

Slips and trips are the most common cause of major injuries at work and can happen almost anywhere-broken bones and other serious injuries frequently result from major slips and slipping can also be the initial cause for a range of other types of accident, such as fall from height...

Samedi 04 novembre 2017

Medical masks synthetic blood tester is used to determine the resistance of medical protective masks to by synthetic blood at different test pressures,and can also be used to determine the resistance to blood of other coating materials. Application The device is used for anti-synthetic...

Samedi 04 novembre 2017

Products meet the standard requirements, which is YY0469-2004 "Medical surgical mask technical requirements" and YY 0969-2013 "Disposable medical masks", medical face mask air exchange pressure difference tester is measured by gas pressure difference on both sides of the mask (ie...)

Samedi 04 novembre 2017

This device is mainly used to test the flame retardant performance of medical masks. The combustion performance of the mask is measured through a head mold wearing a mask de-vice to contact with the flame at a certain linear speed. The device is mainly used in the field of medical protection...

Samedi 04 novembre 2017

This product uses fluorescent UV lamps, combined with temperature and humidity device to simulate the material decline in color, brightness, strength and cracking, spalling, powder, oxidation damage via the high temperature sun light (UV), high humidity, condensation, dark cycle etc...

Samedi 04 novembre 2017

The rapid extraction of oil and oil is specially used to quickly obtain the oil content of the top and similar materials. Through the container and evaporation, it can detect the grease and oil content of wool and synthetic fiber samples. You can optionally use the 1, 2 or 3 extraction...

Samedi 04 novembre 2017

The instrument is used to test the pilling conditions of wool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product quality and process effect. When testing, the fabric is rubbed against nylon brush and abrasive, or rubbed against abrasive only in the...

Samedi 04 novembre 2017

The device use needle flame to simulate small flame effect resulted from equipment incorrect operation so as to evaluate fire hazard. Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermocouples...

Samedi 04 novembre 2017

The main principle of the wrinkle recovery tester is to apply a predetermined pressure to the specimen under standard atmospheric conditions and to maintain the specified time. The overall structure of the instrument and the precise spiral column ensure that the loaded specimens produce...

Samedi 04 novembre 2017

Standardized sample clamping program, strictly meet the standards. While taking into account the operation, is simple and generous. The calorimeter has a long service life and stable performance. Radiant protective performance is an important performance index of flame retardant products...

Samedi 04 novembre 2017

Fabric water vapour permeability testing apparatus is for assessment of the water vapour permeability ability of fabrics by moisture permeable cup moisture absorption method. The instrument is used to determine moisture (steam) permeability of various types of fabrics (including moisture...)

Samedi 04 novembre 2017

Standards Application ISO 5660 Reaction to fire tests-Heat release, smoke production and mass loss rate. ASTM E 1354 Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter BS 476 Pt.15 Fire tests on building materials and...

Samedi 04 novembre 2017

The new high efficiency filter material filtration performance tester uses the current international mainstream particle counting method, the high efficient large flow laser particle counter to test the basic filtration performance parameters of filter material, such as filtration efficiency...

Samedi 04 novembre 2017

Introduction： Weatherproof test: This test is conducted to find out the impacts on some items and parts in a natural condition by such factors as sunbeam, ozone, rain, snow, temperature and humidity. It will also find out the resistance of the aforesaid items to the aging effects...

Samedi 04 novembre 2017

Technical Parameters： It's great significant for AFC-133 filter test bench to optimize and develop filter materials, ensure quality assurance of the production process. Dust capacity and filtration efficiency are the most interesting properties of filter material properties, depending...

Samedi 04 novembre 2017

Light transmittance test machine for fabric is used to determine the total visible light transmittance of the fabric to evaluate the shading properties of the fabric and is suitable for sheet textile products such as curtains. Test standard : JIS L1005-2009 Test principle: 1. A light...

Samedi 04 novembre 2017

fabric flame retardant performance test machine is mainly used to determine the textile flame, smoldering and carbonization tendencies. Suitable for flame-retardant woven fabrics, knitted fabrics, coated products, quilted products. Scope of application: fabric flame retardant performance...

Vendredi 03 novembre 2017

Quantité : 1PCS - Prix : 83.69USD

- 6 dB Basestation MINI DIN Tapper Directional Coupler - Product Description What is Directional coupler? Directional couplers are most frequently constructed from two coupled transmission lines set close enough together such that energy passing through one is coupled to the other...

Vendredi 03 novembre 2017

Quantité : 1PCS - Prix : 222USD

- Low PIM -150dBc 698-2700MHz 4.3-10 connector 2 Way Microstrip splitter - Product Description What is power splitter? Power splitter is a kind of all input signal energy will be divided into two or more signals energy output devices, also can in turn be synthesized multi -channel...

Jeudi 02 novembre 2017

Leadshine DMA860H 7.2A Stepper Motor Driver for Stepping Motor CNC Machine Driving Leadshine DMA860H is the new vision of MA860H, these two models are replaceable. DMA860H cnc driver is stepper motor driver widely used in CNC router machine, CNC laser machine etc. DMA860H Step Motor...

Jeudi 02 novembre 2017

ISO 30 HSK50 Tool Holder Clamping Stand Roller Bearing Tool Lock Seat This tightening stands for CNC toolholders, ISO-30, HSK-50. Roller-bearing flange diameter is 50mm. Holds all ISO30 tool holders and HSK50 toolholders. CNC Toolholder Locking Stand Features: Tool Holder Tightening...

Mercredi 01 novembre 2017

Quantité : 1000 - Prix : 1,00 €

Product Description This Portable High Power Wireless Anti-explosion Jammer is the most advanced high efficiency cell phone and satellite signal jammer in the whole world which is professionally designed for bomb disposal and VIP protection like during battle and security safeguard...

Mercredi 01 novembre 2017

Advantages compared with traditional production unit 1.Reduce cost, small cover area, small investment, high return. Distribution model from material to machine, far reduce the logistic cost compared with selling urea solution. 2.Intelligent operation, one button start, high efficiency...

Mercredi 01 novembre 2017

Technological Craft of DEF Solution Production Equipment 1 Preface of DEF Solution Production Equipment Shandong Newblue provides one set Adblue production system. 1.1 Raw water quality: use tap water supplied by customers. 1.2 Output quality：meet customer's requirement, 2 stage...