LUBRICATION - 1135 Annonces

Mardi 08 septembre 2015

Quantité : 1+ - Prix : mail

Roll crusher is divided into: roller crusher, four roll crusher, tooth Roll crusher, which is divided in accordance with the specifications! The expected size of the adjustment: fitted with the wedge or shim to adjust the top device, the device is equipped with a wedge between the...

Jeudi 27 août 2015

We are factory specializing in the manufacture and export of Grease Nipple,which is used for U-joint,Generator,Motor,etc,with a producing history of more than 10 years.We have passed ISO9001: 2008.We are located in No.125,Diankou Hardware Town,Zhuji City,Zhejiang,China,which is near...

Vendredi 21 août 2015

Quantité : 20 per mon - Prix : $999-999999

1. Main use This machine has compact structure and high production efficiency. It applies bowl bearings a nd has higher accuracy storage; besides, it adopts a centralized lubrication system and a novel oil seals dust control system. The hydraulic cylinder or hand-driven winch can...

Vendredi 14 août 2015

Impeller diameter 250~1000 mm Speed of mainshaft 350~5000 rpm Pressure range 100~2500 Pa Flow range 588~23530 CFM Blade Back Inclined Impeller Support SWSI (Single Width, Single Inlet), Impeller overhung. Drivetrain Coupling drivetrain Can assign...

Samedi 08 août 2015

Determination of the actual yield Liaoduo and meets the requirements, and to ensure that the bearing temperature rise should not exceed 35 ℃, Metso crusher spares work should be smooth and should not have a more severe vibration, the fasteners should be solid. Lubrication points...

Jeudi 06 août 2015

Impeller diameter 282~1574 mm Speed of mainshaft 720, 960, 1450, 2900 rpm Pressure range 50~3200 Pa Flow range 500~145000 cmh Blade Mix-Flow Drivetrain Direct drivetrain Can assign Lubrication Oil bath lubrication Motor DEC,DASU,TECO ...

Jeudi 06 août 2015

Impeller diameter 230~1010 mm Speed of mainshaft 720, 960, 1450, 2900 rpm Pressure range 30~330 Pa Flow range 300~50000 cmh Blade Axial Drivetrain Direct drivetrain Can assign Lubrication Oil bath lubrication Can assign Motor DEC,DASU,TECO...

Jeudi 06 août 2015

Performance Impeller diameter 180~1000 mm Speed of mainshaft 150~1100 rpm Pressure range 100~1200 Pa Flow range 294~58824 CFM Structure Blade Forward Inclined Impeller Support SWSI (Single Width, Single Inlet), Impeller overhung. Drivetrain ...

Jeudi 06 août 2015

Impeller diameter 180~1000 mm Speed of mainshaft 150~1100 rpm Pressure range 100~1200 Pa Flow range 294~58824 CFM Blade Forward Inclined Impeller Support SWSI (Single Width, Single Inlet), Impeller overhung. Drivetrain Coupling drivetrain Can...

Jeudi 06 août 2015

Impeller diameter 250~1000 mm Speed of mainshaft 350~5000 rpm Pressure range 100~2500 Pa Flow range 588~23530 CFM Blade Back Inclined Impeller Support SWSI (Single Width, Single Inlet), Impeller overhung. Drivetrain Coupling drivetrain Can assign...

Jeudi 06 août 2015

Prix : US $ 1,000 - 50,000

High Quality Jaw Crusher Specifications Quarry Jaw Crusher Price Product Description Introduction Jaw Crusher is widely used aggregate crusher to crush all kinds of materials with a compressive strength lower than 320MPa in mining,metallurgy,public road,railway,hydropower and many...

Mardi 04 août 2015

Prix : US$ 0.1/piece

- We can custom made for you!!! E-mail or call me directly, Plz just feel free to let us know. Thank you! - Main Properties: Project Name Apparent Density Tensile Strength ≥(min) Unit g/cm3 MPa Result 2.10~2.30 15.0 1. FDA, ROSH certification 2. Customize ptfe gasket 3...

Mardi 04 août 2015

Prix : US$ 0.05/piece

We can custom made for you!E-mail or call me directly, Plz just feel free to let us know.Thanks! Product Description We can also produce PTFE,PVDF,PEEK etc parts according to customer's requirements. PTFE is many plastic material is one of the most stable heat of a kind of plastic...

Mardi 04 août 2015

Type NFS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to install...

Mardi 04 août 2015

Type NFS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to install...

Mardi 04 août 2015

Type NFS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to install...

Samedi 01 août 2015

- Type AS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outside dimensions are the same as series 62... Ball bearings. A typical arrangement is...

Samedi 01 août 2015

- Type AS is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outside dimensions are the same as series 62... Ball bearings. A typical arrangement is...

Samedi 01 août 2015

Type NFR is a bearing supported roller type freewheel without any sealing. Lubrication and sealing must be provided by the installation. Standard lubrication is oil. Size 8 to 20 units use steel on steel bearing support ROM the inner race. Above size 20, two 160... Series ball bearings are used...

Samedi 01 août 2015

Type NFR is a bearing supported roller type freewheel without any sealing. Lubrication and sealing must be provided by the installation. Standard lubrication is oil. Size 8 to 20 units use steel on steel bearing support ROM the inner race. Above size 20, two 160... Series ball bearings are used...

Samedi 01 août 2015

Type NFR is a bearing supported roller type freewheel without any sealing. Lubrication and sealing must be provided by the installation. Standard lubrication is oil. Size 8 to 20 units use steel on steel bearing support ROM the inner race. Above size 20, two 160... Series ball bearings are used...

Vendredi 31 juillet 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to...

Vendredi 31 juillet 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to...

Jeudi 30 juillet 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to...

Jeudi 30 juillet 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to...

Jeudi 30 juillet 2015

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Nominal outer diameter is the same as a series 63... Ball bearing. A typical arrangement is to install...

Mercredi 22 juillet 2015

Specifications of X(S)M-50X40 ~ X(S)M-160X40 Rubber (Plastic) Internal Mixer (Intensive Mixer) Model Item X(S)M-50×40 X(S)M-80×40 X(S)M-120×40 X(S)M-160×40 Total Volume of Mixing Chamber L 50 80 120 160 Working Volume of Mixng Chamber L 30 60 90 120...

Vendredi 03 juillet 2015

Quantité : 100 Set/Se - Prix : US $ 25,000 - 65,000

- Quick Details - - Condition: New - Place of Origin: Shandong, China (Mainland) - Brand Name: HJ - Model Number: GZLH860 - Voltage: 380v,50hz,3 phases - Power(W): 220kw - Dimension(L*W*H): 3.3*1.4*3.1m - Weight: 14500 kg - Certification: CE&ISO9001 - Warranty...

Vendredi 03 juillet 2015

Quantité : 100 Set/Se - Prix : US $ 5,000 - 13,172

- Quick Details - - Condition: New - Place of Origin: Shandong, China (Mainland) - Brand Name: Hongjing - Model Number: GZLH460 - Voltage: 380v,50hz,3 phases - Power(W): 55kw - Dimension(L*W*H): 1.92*1.1*2.0m - Weight: 4500 kg - Certification: CE&ISO9001 - Warranty...

Jeudi 02 juillet 2015

Quantité : 50 Set/Set - Prix : US $ 10,000 - 25,000

- Quick Details - - Condition: New - Place of Origin: Shandong, China (Mainland) - Brand Name: HJ - Model Number: DZLP800 - Voltage: 380v,50hz,3 phases - Power(W): 90kw - Dimension(L*W*H): 1.98*1.1*2.1m - Weight: 4t - Certification: CE&ISO9001 - Warranty:...