28%MIN - 8746 Annonces

Mardi 16 avril 2024

Specifications of 22217 EK Bearing Designations (Bearing with tapered bore) 22217 EK Principal dimensions (mm) d 85 D 150 B 36 r1,2 2 Basic load ratings(KN) Basic load ratings (dynamic) (C) 276.45 Basic load ratings (static) (C0) 315.25 Fatigue load limit (Pu) 34...

Mardi 16 avril 2024

Specifications of 22216 E Bearings Designations (Bearing with cylindrical bore) 22216 E Principal dimensions (mm) d 80 D 140 B 33 r1,2 2 Basic load ratings(KN) Basic load ratings (dynamic) (C) 228.92 Basic load ratings (static) (C0) 261.9 Fatigue load limit (Pu)...

Mardi 16 avril 2024

Specifications of 22216 EK Bearings Designations (Bearing with tapered bore) 22216EK Principal dimensions (mm) d 80 D 140 B 33 r1,2 2 Basic load ratings(KN) Basic load ratings (dynamic) (C) 228.92 Basic load ratings (static) (C0) 261.9 Fatigue load limit (Pu) 29...

Mardi 16 avril 2024

Specifications of 22215 EK Bearings Designations (Bearing with tapered bore) 22215EK Principal dimensions (mm) d 75 D 130 B 31 r1,2 1.5 Basic load ratings(KN) Basic load ratings (dynamic) (C) 205.64 Basic load ratings (static) (C0) 232.8 Fatigue load limit (Pu) 26...

Mardi 16 avril 2024

Specifications of 22212 E Spherical Roller Bearings Designations (Bearing with cylindrical bore) 22212E Principal dimensions (mm) d 60 D 110 B 28 r1,2 1.5 Basic load ratings(KN) Basic load ratings (dynamic) (C) 151.32 Basic load ratings (static) (C0) 161.02 Fatigue...

Mardi 16 avril 2024

Specifications of 22211 E Bearings Designations (Bearing with cylindrical bore) 22211 E Principal dimensions (mm) d 55 D 100 B 25 r1,2 1.5 Basic load ratings(KN) Basic load ratings (dynamic) (C) 121.25 Basic load ratings (static) (C0) 123.19 Fatigue load limit (Pu) 13...

Mardi 16 avril 2024

Specifications of 22211 EK Bearings Designations (Bearing with tapered bore) 22211EK Principal dimensions (mm) d 55 D 100 B 25 r1,2 1.5 Basic load ratings(KN) Basic load ratings (dynamic) (C) 121.25 Basic load ratings (static) (C0) 123.19 Fatigue load limit (Pu) 13...

Mardi 16 avril 2024

Drum flying shear in rolling mill Drum flying shear cutting machine are used at the exit of various continuous cold rolling mills for strips to realize dynamic sub-coiling. During the shearing process, the upper and lower drums of the flying shear machine make circular motions, and...

Samedi 13 avril 2024

Chafer Fabrics are the special industrial fabrics mainly made of Nylon 6, Nylon 66 and Polyester yarns. Chafer fabric has quite high breaking strength and good adhesion. Yusheng produces a variety of chafer fabrics, Standard products mainly made of Nylon 6, Nylon 66 and Polyester...

Samedi 13 avril 2024

TMQ is brown piece of amber. It is soluble in benzene, acetone, and other organic solvents but insoluble in water. It is slightly soluble in petroleum hydrocarbons. It has low toxicity and pollution. Specification of Antioxidant TMQ NAME OF INDEX TECHNICAL SPECIFICATIONS Appearance...

Samedi 13 avril 2024

The stainless steel spiral welded pipe unit adopts front-swing intermittent production, which is a complete set of spiral steel pipe manufacturing machine integrating machinery, electrical automation control and hydraulic control. SPECIFICATION OF STAINLESS STEEL SPIRAL WELDED PIPE...

Samedi 13 avril 2024

The pipe X ray machine for spiral steel is suitable for non-destructive testing of the quality of spiral steel pipe welds. The industrial xray equipment can quickly and efficiently detect defects such as pores, looseness, inclusions, and incomplete in spiral steel pipe welds. SPECIFICATION...

Samedi 13 avril 2024

The bare conductor cable also are known as hard drawn bare copper conductor, ground copper and bare copper strand. They have two main types, the hard drawn and soft drawn (tinned soft drawn). The stranded bare earth cable is the connection of electrical equipment for transmission...

Vendredi 12 avril 2024

Quantité : 10000+ - Prix : $5-9999

SFP28 Direct Attach Cables (25g sfp28 dac) are compliant with SFF-8432 and SFF-8402 specifications. Various choices of wire gauge are available from 30 to 26 AWG with various choices of cable length (up to 5m). The SFP28 passive direct attach copper cable assemblies are high-performance...

Vendredi 12 avril 2024

Quantité : 10000+ - Prix : $5-9999

SYSP8A10D SFP28 lr transceivers, according to 25 Gigabit Small Form Factor Pluggable “SFP28”(25ge sfp28) Multi-Sourcing Agreement (MSA) SFF-8431 Rev.4.1 and SFF-8472 Rev. 12.1, are designed for use up to 25.78Gb/s data rate and up to 10km link length. They are compatible with SFF-8432...

Vendredi 12 avril 2024

Quantité : 10000+ - Prix : $5-9999

GearLink's 100M SFP optical fibre transceiver GAS7L0C31 is a small pluggable transceiver module based on the SFP multi-source agreement (MSA). It works with optical fibers to provide a complete two-way data link connection for high-speed and transparent data transmission. Used in...

Vendredi 12 avril 2024

Quantité : 10000+ - Prix : $5-9999

The SFP-10G-BX40 series single mode sfp transceiver is a small form-factor pluggable module for duplex optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The SFP-10G-BX40 module is designed...

Vendredi 12 avril 2024

Quantité : 10000+ - Prix : $5-9999

SFP+ 10G Tx1330/Rx1270 10Km LC Transceiver belongs to SFP+ BIDI series products. BIDI single-fiber bidirectional optical module needs to use different optical wavelengths in the sending and receiving directions to achieve simultaneous transmission of optical signals in both directions...

Vendredi 12 avril 2024

Quantité : 10000+ - Prix : $5-9999

The GHS1L0C85 850nm DFB 10Gigabit Transceiver is designed to transmit and receive serial optical data over single-mode optical fiber with 10Km.They are compliant with SFF-8431,SFF-8432, 10GFC Rev 4.0, FC-PI-4 Rev 7.0 and IEEE802.3ae 10GBASE-LR/LW. The transmitter converts serial...

Vendredi 12 avril 2024

Quantité : 10000+ - Prix : $5-9999

SFP+ 10G 1310nm 40Km LC Transceiver is a hot-pluggable SFP+ package/dual LC interface, with DDM digital diagnosis function, metal shell package effectively reduces electromagnetic interference; complies with SFP+ MSA protocol; complies with SDH/SONET transmission standards; complies...

Vendredi 12 avril 2024

Quantité : 10000+ - Prix : $5-9999

Gearlink's GCS7L0C54 SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The china optical transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1490nm DFB laser (the 1550nm DFB laser)...

Vendredi 12 avril 2024

Quantité : 10000pcs - Prix : ¥8--¥1000

Types of End Brushes End brush is a common small industrial brush, whose structure is simple but very stable. Wire end brush can be easily installed on hand tools, such as Angle Grinder or automatic equipment like CNC. For different workpiece materials, polishing requirements, available...

Jeudi 11 avril 2024

Smart Basal Thermometer What thermometer to use for basal body temperature? shecare smart basal digital thermometer with App is a kind of bluetooth thermometer to check basal body temperature automatically synchronized with the body temperature thermometer app via Bluetooth after...

Jeudi 11 avril 2024

Green silicon carbide crystals have high purity and hardness. You can find the wideapplications of green silicon carbide powder in machining hard alloy, metal and non-metallic materials. For instance, materials with hard and brittle characteristics like copper, brass, aluminum, magnesium...

Jeudi 11 avril 2024

Brown fused alumina is made of high-quality bauxite, anthracite, and iron filings. It is cooled and smelted at a high temperature by more than 2000 degrees in an electric arc. It is crushed and shaped by a jaw crusher and a ball mill. Description of Brown Fused Alumina for Refractory...

Jeudi 11 avril 2024

HVAC SOLENOID VALVE Egret series hvac solenoid valve is an electromechanical valve, used to control the refrigerant or water autonomously and remotely in the air conditioning system. There's a solenoid coil on the top, which is used for controlling the valve by passingan electrical...

Jeudi 11 avril 2024

DOUBLE SIDED TISSUE TAPE Egret so-called double sided tissue tape is used a lot for bonding different materials, and for refrigerator metal parts fixing. Normally is coated with natural rubber glue or solvent based acrylic adhesive on both sides. Plus, this tissue tape double sided...

Jeudi 11 avril 2024

HIGHWAY GUARDRAIL & FENCE POST ROLL FORMING MACHINE This series of rolling guardrail machines are equipped with a quick-change machine base for multi-profile purposes. The maximum production speed of our highway guardrail machines can reach 20m/min. With the help of this series...

Jeudi 11 avril 2024

High Speed Tube Mill Line is used to produce tube diameter between φ4mm to φ50mm. The top working speed of this tube mill line can reach as high as 120m/min to 130m/min. Main Technical Parameters of HighSpeedTube Mill (For reference only, will be as requests): A: suitable strip coils 1...

Jeudi 11 avril 2024

The high-speed metal roof tile machine is for continuously roll forming and pressing step tiles sheets. The step length of this series can be set up and the depth of each step is adjustable. Its production speed of this series is about 8-10 m/min. Similar to other wall sheet roll...