API 5L X65 MATERIAL - 51397 Annonces

Mercredi 09 août 2023

Feton Ultra Plant™ led grow light 200 watt : The new generation with sel-developed patented LED tech developed by grow light company.It outperforms 99% of conventional LED grow light. Specification of 200w led full spectrum grow light General Product Ultra Plan™ Grow Model UP150P...

Mercredi 09 août 2023

HaiQ Warehouse Automation Software Platform HaiQ is an intelligent software platform that leverages AI algorithms to streamline order fulfillment and inventory management. It serves as the central command for inbound, outbound and inventory management, seamlessly integrating with other devices...

Mardi 08 août 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Egret vinyl tape is made of soft polyvinyl chloride (PVC) film as the base material, coated with rubber pressure sensitive adhesive, with good insulation, flame resistance, voltage resistance, cold resistance and other characteristics, suitable for automobile wiring, wire winding...

Mardi 08 août 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Egret so-called vinyl electrical tape is used a lot for wrapping the wire harness, so it is also called PVC wire harness tape. Important to realize, the main difference with non-adhesive pvc tape is about the glue. The base material is pure PVC resin and coated with aggressive synthetic...

Mardi 08 août 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Polyethylene fiber mesh laminated with foil is very popular in HVAC industry. It can used for wrapping the air ducts and laminating the glass wool or rock wool thermal insulation, duct board joints applications. It can be either easy tear or hard tear as per customers requirements...

Mardi 08 août 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Industrial felt is made of wool which is machined and bonded (non-weft and warp interwoven). The main features are as follows: Elastic, can be used as shockproof, sealing, gasket and elastic wire needle cloth bottom felt material. Good bonding performance, not easy to loose, can...

Mardi 08 août 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Egret BL-DXF series Diaphragm check valve adopts a magnetic, diaphragm, filter self-priming structure design so that the check valve is not limited by the installation Angle and the relationship between the size of the reverse pressure to affect the automatic closure of the valve...

Mardi 08 août 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Egret series refrigeration ball valve is a manually regulated shut-off valve, which is applicable to two-direction flow. It is used on the liquid, air suction, and hot vapor piping of the freezer, cold store, and air conditioning unit. The valve seat is well sealed with perfect...

Mardi 08 août 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Egret so-called pvc pipe wrap tape is used a lot for wrapping air ducts, so it is also called PVC pipe wrap tape. Important to realize, the main difference with non adhesive pvc tape is about the glue. The base material is pure PVC resin, and coated with aggressive synthetic rubber adhesive...

Mardi 08 août 2023

Pekhill's Organic Blueberry Juice Powder is sourced from wild blueberries in northern China, a pure natural growing environment that allows our products to meet organic standards. Specifications of Organic Blueberry Juice Powder Specifications Description Organoleptic Fine pink...

Mardi 08 août 2023

Astragalus is the astragalus membranaceus root (Fisch.) Bge. Var. mongholicus (Bge.) Hsiao or A. membranaceus (Fisch.) Bge. Pekhill has organic Astragalus Membranaceus powder, organic Astragalus Membranaceus wholeroot and TBC available. Specification of Pekhill organic Astragalus...

Mardi 08 août 2023

Organic Blue Algae Materials Microalgae are a typical type of photoautotrophic microorganisms that are widely distributed in freshwater and marine environments. Microalgal biomass is a renewable resource that contains a variety of biologically active substances, such as protein, polyunsaturated...

Mardi 08 août 2023

Why Is Molecular Diagnosis Important? Molecular diagnosis is the application of molecular biology to detect the structures or expression level changes of genetic materials, aiming to determine the susceptibility of individuals to certain diseases and existing diseases. Diagnostic...

Mardi 08 août 2023

XTY-50LA6545 is equipped with stainless inner box which greatly avoids the wet materials corrosion. Strong machine frame makes it work well in odious environment. Professional enclosed design highly prevents the dust in. Pressing: Feed Opening Size: ∅500 Baling Chamber Height: 800mm...

Mardi 08 août 2023

The three-piece low-temperature ball valve socket weld belongs to the three-piece low-temperature ball valves series. The valve body is composed of three sections. The two ends are socket welding connection surfaces. After special low-temperature treatment, the temperature resistance...

Mardi 08 août 2023

Semi automatic balers can also connect with the conveyor and air pipe lines to feed and compress the materials automatically.The difference is that semi auto balers need manual tying. But it has the advantage on the price. It's also the most people's preference. Main Cylinder Size...

Mardi 08 août 2023

Butt weld ball valve closure member is a sphere, it is relying on the sphere around the centerline of the valve body 90-degree rotation to achieve open and close a valve. The straight-through ball valve is mainly used to cut off the medium in the pipeline. There is a two-piece and...

Mardi 08 août 2023

The ball valve is composed of a valve body and a bonnet. It is called a two-piece type. The one-piece type is an integrated structure. The two-piece ball valve has improved the one-piece valve with less flow and is easy to leak. The gland is added to prevent leakage. Nominal pressure: 1...

Mardi 08 août 2023

The full bore ball valve has a constant-width flow, that is, the size of the pores from inflow to outflow is the same, and its size cannot be less than the value specified by the standard, which is roughly equivalent to the nominal diameter of the specification. For example, the flow...

Mardi 08 août 2023

The waterproof cast protector hand is made of high-quality TPU material, which is easy to accommodate irritation for skin, the easiest cover for skin, bandages, and dressings for wounds. Hand Cast Cover Specifications Item number Item description Detailed size Unit box size (CM)...

Mardi 08 août 2023

medical cloth tape with Dispenser 1PCS, 1.9cm*5.5m CE/ISO/FDA Certificate Material: Durable Cloth - Silk Without Ethylene Oxide Sterilization Specifications of Fabric Adhesive Tape MedicalItem number Item description Detailed size Package Unit box size (CM) Single box weight (Kg)...

Mardi 08 août 2023

As the most commonly used fabric for adhesive fabric bandages, flexible fabric is really versatile. As the adhesive bandage material, the fabric is not only reasonably priced but also has stable functions. Flexible fabric stretch and flexes as you move,fabric adhesive bandage has...

Mardi 08 août 2023

Prix : 2.8-3.2USD

Plastic molds are tools that are matched with plastic mold making machines in the plastic processing industry to give plastic products a complete configuration and precise dimensions. Due to the wide variety of plastics and processing methods, and the complex and simple structures...

Mardi 08 août 2023

Prix : 2.8-3.2USD

As a china abs molding supplier, Keyplast has leading advantages in custom plastic molding industry, with rapid quotation, professional design, efficient processing, regular feedback, strict quality-control and automatic packaging. For prototyping, we provide professional suggestions...

Mardi 08 août 2023

Prix : 2.8-3.2USD

What is plastic injection molding? Plastic Injection molding is a molding method that combines injection and molding. The advantages of plastic small scale injection molding method are fast production speed, high efficiency, operation can be automated, variety of colors, shapes can...

Mardi 08 août 2023

Prix : 2.8-3.2USD

Insert molding service is one category of injection molding that allows preformed parts or components, usually metal inserts, to be inserted into the plastic molded parts and to have a final product in one-step process. Insert moulding has characteristics as below: A combination of two parts...

Mardi 08 août 2023

Prix : 2.8-3.2USD

What materials are used in injection moulding? Materials used in injection moulding generally include abs molding, nylon injection molding, polycarbonate injection molding, PP injection molding, PVC injection molding, HDPE injection molding, and so on. Feel free to check out the injection...

Mardi 08 août 2023

Prix : 2.8-3.2USD

Plastic Injection Molding Plastic Injection Molding Plastic injection moulding is a method of making plastic products. The molten plastic is injected into the mold by pressure, and then cooled and molded to obtain various plastic parts. There are mechanical injection molding machines...

Mardi 08 août 2023

Prix : 2.8-3.2USD

Injection mold design engineering is a procedure at the first stage of injection molding process, which develops the injection mold designs to improve the effectiveness and efficiency in injection molding. Plastic mold design technical team of R&D and engineers of Keyplast is...

Mardi 08 août 2023

Topstar 4 inch canless recessed lights Kit Fixture 5K Daylight LED Ceiling Light 5CCT Canless Recessed Lighting Specification of 4 Inch Canless Recessed Lighting Name 4 Inch Recessed Downlight Power 8W Lumen 700lm CCT 2700K/3000K/3500K/4000K/5000K CRI RA80/RA90 Lamp base...