PA66 - 209 Annonces

Mercredi 12 avril 2023

Quantité : 1000t/m - Prix : 2-15 USD

Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending and modifying with the addition of a toughening agent. The flexural strength, abrasion resistance and creep resistance of Nylon 66 are very outstanding. What is the pa6 tensile strength of nylon...

Mercredi 12 avril 2023

Quantité : 1000t/m - Prix : 2-15 USD

Nylon66 PA66 Heat Stabilized Description Heat stabilized nylon PA66 a high temperature nylon made by the polycondensation of terephthalic acid and hexamethylene diamine. Heat stabilized nylon 6 has the properties of low water absorption, excellent heat resistance, good processing fluidity...

Mercredi 12 avril 2023

Quantité : 1000t/m - Prix : 2-15 USD

Flame-retardant PA66FR is a halogen-free flame retardant engineering plastic made of nylon 66 resin as a base material (other fibers can also be added), mixed and extruded. Typical Application of Nylon66 PA66 Halogen-free FR(A2005X01) Anmei PA66 FR is filled with minerals and the...

Mardi 31 janvier 2023

Quantité : 130000 pcs - Prix : $0.02~$0.40 per piec

The thread length of the long cable gland is 15mm, which is suitable for relatively thick distribution boxes or electrical panels. Our long thread cable glands is made of PA66 material and can be waterproof and dustproof. As one of the most professional nylon cable ties manufacturers...

Vendredi 06 janvier 2023

Prix : $2-$150

Pressure Range: <16Bar~47Bar</span> Adjustable Pressure Setting One-piece interface welded bellows element Fast rebound function, Low abrasion and Durable High reliability electrical & mechanical performance A digital thermostat is not the ideal solution for some refrigeration...

Vendredi 06 janvier 2023

Prix : $2-$150

HVAC Pressure Transducer Pressure Range: <16Bar~47Bar</span> Adjustable Pressure Setting One-piece interface welded bellows element Fast rebound function, Low abrasion and Durable High reliability electrical & mechanical performance A digital thermostat is not the ideal...

Samedi 31 décembre 2022

With the fast growth in the electronic industry, the demand for injection molding electronics is much higher. The injection molding electronics can be intricate or simple. Intricate injection molding electronics can be economical because they combine many parts into one piece which...

Vendredi 09 décembre 2022

Anmei focuses on the production of modified engineering plastics. We have polyamide pa66 modified products with properties of heat-resistant, reinforced, toughened, flame-retardant, wear-resistant, weather-resistant, oil-resistant and conductive. According to the characteristics...

Vendredi 09 décembre 2022

As an engineering plastic company, Anmei focuses on the production of modified engineering plastics, among which high-performance nylon 6 engineering plastics are one of our main products. We have nylon 6 modified plastics of heat-resistant, reinforced, toughened, flame-retardant...

Vendredi 09 décembre 2022

We are here to be your reliable partners of modified plastic. Engineering plastic is the high-performance plastic that can apply in different industrial areas, the higher mechanical strength and heat resistance of these modified plastics make them an excellent alternation of metal material...

Mardi 29 novembre 2022

Quantité : 130000pcs - Prix : 0.02-0.4usd

The outstanding features of this series of cable glands are safe, durable, and economical. Our NPT cable gland is Made of PA nylon material, with long service life, good toughness, wear-resistance and oxidation resistance. NPT Cable Gland Specifications Product PLASTIC CABLE GLAND...

Mardi 29 novembre 2022

Quantité : 130000pcs - Prix : 0.02-0.4usd

The outstanding advantage of the multi hole glands is that the seal can have multiple outlet holes to meet the need of multi-harness cables. The seal has good toughness, can fix the cable, and make the cable gland to be waterproof and dustproof. Multi Hole & Flat Hole Nylon Cable...

Mardi 29 novembre 2022

Quantité : 130000pcs - Prix : 0.02-0.4usd

The plastic and rubber parts of the reinforced cable gland are made of the best materials. The plastic part is more solid and the surface is more wear-resistant; rubber seals and gaskets have better thickness and flexibility and are made with precision, which is 100% compatible with...

Mardi 29 novembre 2022

Quantité : 130000pcs - Prix : 0.02-0.4usd

The thread length of the extended cable gland, a kind of metric cable connectors, is 15-20mm, which is suitable for relatively thick distribution boxes or electrical panels. When the length of the normal size cable glands is not long enough to fit the lock nut, in this case, a long...

Vendredi 11 novembre 2022

GM-TECH has been manufacturing tools for injection molding of plastics for various industries for more than 10 years. We are also experienced in the automotive, electrical, and home appliance industries but also manufacture moulds for other industries requiring plastic injection china...

Jeudi 20 octobre 2022

Quantité : USD3000-20 - Prix : 30-40sets/per month

Pre Deformation Mold When the plastic material rushes into the mold cavity, it loses heat due to heat conduction, and the melted plastic will freeze and solidify, therefore, for complex or large products, high mold temperature is usually used for filling, the purpose is to reduce...

Mercredi 21 septembre 2022

The thread length of the extended cable gland, a kind of metric cable connectors, is 15-20mm, which is suitable for relatively thick distribution boxes or electrical panels. When the length of the normal size cable glands is not long enough to fit the lock nut, in this case, a long...

Samedi 17 septembre 2022

Quantité : 30 sets of - Prix : $1,000-$10,000

With the fast growth in the electronic industry, the demand for injection molding electronics is much higher. The injection molding electronics can be intricate or simple. Intricate injection molding electronics can be economical because they combine many parts into one piece which...

Jeudi 08 septembre 2022

Quantité : 8,000,000p - Prix : $0.1-$10

Earth Leakage Breaker RCBO RCCB Circuit Breaker Overload/Short Circuit Protection Safety Breaker, your best choice! Specification of rccb 4 pole 63 amp Residual Current Circuit Standard IEC60898 Rated Voltage 230/400 Rated Current 6,10,16,20,25,32,40,50,63 Poles 1-4 poles...

Jeudi 01 septembre 2022

As an engineered plastics company, Anmei focuses on the production of modified engineering plastics, among which high-performance nylon 6 engineering plastics are one of our main products.The mechanical properties of blended materials such as glass fiber and toughening agent added...

Jeudi 01 septembre 2022

PA 66 GF 15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 GF15 Storage and Handling PRE-PROCESSING： Pre-drying: 4-6h / 130°C Processing: Melting temperature 280 - 300 °C Mold temperature 60 - 100 °C Product storage and handling:...

Jeudi 01 septembre 2022

Using polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending and modifying with the addition of a toughening agent. The flexural strength, abrasion resistance and creep resistance of Nylon 66 are very outstanding. What is the tensile strength of...

Mercredi 17 août 2022

Quantité : 1 set - Prix : 5000USD-30000USD

Mould Name: Precision Automotive Plastics Mould Part Material: PA66 G30 Product Description: BODY plastic Mould Cavity: Cavities Mold Mould Cavity Steel: 2344ESR Mould Injection System: hot runner Mould Ejection System: ejector pin Mould Cycle Time: 26's Mould Life Cycle: 1,000,000 Lead Time...

Mercredi 17 août 2022

Quantité : 1 set - Prix : 5000USD-30000USD

Mould Type: Plastic Precision Car Parts Mould Production Material: PC, PP, PA6, PA66, PE, ABS, HDPE, TPE, TPU, PET, PPS, POM, PBT, PMMA, PPS, SAN, etc. No of Cavities: Single or Multi cavity Core Material: 2344, S136,H13,S7, NAK80,SS420, P20 and other steel according to customer mould...

Mardi 02 août 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

PA66 GF30 Car Parts Plastic Injection Mold If you want to get the product is straight, your mold design and mold processing are also made straight, but there will be a bent product, deformed or the product size is out tolerance, they were caused by material, temperature, shrinkage...

Samedi 09 juillet 2022

Reinforced with 20% of glass fiber on substrate PA66 is called PA66 GF20, it improves dimensionally stabilized and impact resistance for injection moulding. Typical Application of PA66 GF 20 (A2000D) PA GF20 is applied to various precision gears due to its high rigidity, dimensional stability...

Samedi 09 juillet 2022

Pa6 6 gf15 is Nylon66 and 15% Glass-Filled, these materials are performed with medium stiffness and strength but it has much better mechanical properties over unfilled granules. Reinforced with 15% of glass fiber and modified Nylon 66 in Anmei plastic plant combined with other property...

Samedi 02 juillet 2022

Weather resistant zip ties are made by PA12/PA612 NYLON MATERIAL supplied by Ascend. PA12/PA612 different from normal PA66 which will need absorb moisture to make stable balance, so NYLON 66 can not use in low humidity, or High UV place for long time. PA12/PA612 is special developed...

Samedi 02 juillet 2022

Injection Moulding Products GM-TECH has been manufacturing tools for injection molding of plastics for various industries for more than 10 years. We are also experienced in the automotive, electrical, and home appliance industries but also manufacture moulds for other industries requiring...

Mercredi 22 juin 2022

Prix : 5000USD-30000USD

Insert Molding Technologies for Automotive Industry Mould Type: Automotive Sensor Plastic Injection Mould Production Material: Nylon PA66 No of Cavities: 4 cavities Core Material: S7 Cavity Material: S7 Mold base steel: 1.1730 with A/B plate 1.2312 Injection System: Cold runner Type of gating...