METHODS - 9083 Annonces

Mardi 28 juillet 2015

Model price (USD) Power factor Lamp bead amount Waterproof Rating Input voltage Insulation type Specification Control method Service environment SC-YF-DGXX-E01 >0.95 SMD5050 3W IP65 DC24V CLASS II Φ100mm DMX512RGB full-color -35℃~+40℃ 1. Light source: CREE/ Taiwan...

Jeudi 16 juillet 2015

Prix : 1 000,00 €

Shuanghe Mixer CO.,LTD.located in Wenzhou,Wenzhou peoplehas excellent quality and honesty, efficiency and win-win situation as the goal of philosophy. In 1991, the beginning of China's reform and opening up, the first conical mixer was produced in Shuanghe manufacturing shop, We...

Lundi 13 juillet 2015

These materials are mainly used in applications where high frequencies should be absorbed. In a lot of these cases the “reflective shielding” of EMC gaskets is not fully sufficient. Therefore microwave absorbers are used in combination with the EMC gasket to reach requested results...

Vendredi 10 juillet 2015

Quantité : 1 set - Prix : USD 10000

Introduction of Cement Kiln Waste Heat Boilers Cement kiln heat recovery boiler is a kind of Waste Heat Boiler, with high efficiency and lower consumption, widely applied in cement manufacturing industry, cement plant heat power stations. Cement kiln ash on the tubes of heat recovery...

Vendredi 10 juillet 2015

Quantité : 1 set - Prix : USD 10000

Introduction of Sugar Manufacturing Process The bagasse produced after extracting the juice from sugar cane is used as fuel to generate steam in factories. Increasingly large amounts of bagasse are being made into paper, insulating board, and hardboard and so on. Nowadays, harvesting...

Vendredi 10 juillet 2015

Quantité : 1 set - Prix : USD 10000

Introduction of Sugar Manufacturing Process The bagasse produced after extracting the juice from sugar cane is used as fuel to generate steam in factories. Increasingly large amounts of bagasse are being made into paper, insulating board, and hardboard and so on. Nowadays, harvesting...

Vendredi 10 juillet 2015

Quantité : 1 set - Prix : USD 10000

Introduction of Sugar Manufacturing Process The bagasse produced after extracting the juice from sugar cane is used as fuel to generate steam in factories. Increasingly large amounts of bagasse are being made into paper, insulating board, and hardboard and so on. Nowadays, harvesting...

Vendredi 10 juillet 2015

Quantité : 1 set - Prix : USD 10000

Introduction of Sugar Manufacturing Process The bagasse produced after extracting the juice from sugar cane is used as fuel to generate steam in factories. Increasingly large amounts of bagasse are being made into paper, insulating board, and hardboard and so on. Nowadays, harvesting...

Vendredi 10 juillet 2015

Quantité : 1 set - Prix : USD 10000

Introduction of Sugar Manufacturing Process The bagasse produced after extracting the juice from sugar cane is used as fuel to generate steam in factories. Increasingly large amounts of bagasse are being made into paper, insulating board, and hardboard and so on. Nowadays, harvesting...

Vendredi 10 juillet 2015

Quantité : 1 set - Prix : USD 10000

Introduction of Sugar Manufacturing Process The bagasse produced after extracting the juice from sugar cane is used as fuel to generate steam in factories. Increasingly large amounts of bagasse are being made into paper, insulating board, and hardboard and so on. Nowadays, harvesting...

Vendredi 10 juillet 2015

Quantité : 1 set - Prix : USD 10000

Introduction of Cement Kiln Waste Heat Boilers in Cement Plant Cement kiln heat recovery boiler, as a kind of Waste Heat Boiler is widely applied in cement manufacturing industry, cement plant heat power stations. With high efficiency and lower consumption, cement kiln waste heat...

Dimanche 05 juillet 2015

MC150-DF Auto Feed Laser Marking Machine MC150-DF is a high performance auto feed laser marking machine equipped with optional automatic rewinding mechanism and automatic correction machine with auxiliary feeding function achieves a large-format carving, marking, cutting and punching...

Dimanche 05 juillet 2015

DDB100 Treble Axes Dynamic Focusing Marking Machine Features 1. Fully enclosed optic system doesn't need adjustment and is maintenance-free. ymhqy2015 2. Original imported RF laser enjoys high power and good beam quality, stable power output and long lifetime. 3. Three-axis laser...

Dimanche 05 juillet 2015

DDB150 Treble Axes Dynamic Focusing Marking Machine Technical indicators: Laser power 60w/100w/150w Wavelength 1064nm Work area 400mm*400mm 500mm*500mm 600mm*600mm Supply voltage AC220V±10% Speed 7000mm/s Cooling method water Weight depend on configuration...

Vendredi 03 juillet 2015

Quantité : minimum 1 - Prix : 250 $

500w wind turbine off-grid working system normal data: Rotor diameter : 2.5m Number of Blades: 3PCS; Material of Blades: Fibre glass expoxy; Type of generator: Permanent-mangnet 3 Phase AC; Start up wind speed: 3m/s Rated working wind speed: 8m/s Working wind speed: 3m/s-20m/s...

Vendredi 03 juillet 2015

Quantité : minimum 1 - Prix : 600$

Model: FD2.8-1kw Rotor Diameter: 2.8m Number of Blades: 3pcs Material of Blades: Fibre glass expoxy Cut-in wind speed: 3m/s Working wind speed: 3-20m/s Survival wind speed: 40m/s Rated wind speed: 9m/s Rated rotate speed: 470r/min Rated output power: 1kw Max output power: 1...

Vendredi 03 juillet 2015

Quantité : minimum 1 - Prix : 700$

Rotor Diameter: 3.2m Number of Blades: 3pcs Material of Blades: Fiber glass epoxy Cut-in wind speed: 3m/s Working wind speed: 3-20m/s Survival wind speed: 40m/s Rated wind speed: 9m/s Rated rotate speed: 430r/min Rated output power: 2kw Max output power: 3kw Type of tower...

Vendredi 03 juillet 2015

Quantité : minimum 1 - Prix : 2049 $

Model: FD4-3kw Rotor Diameter: 4m Number of Blades: 3pcs Material of Blades: Fibre glass expoxy Cut-in wind speed: 3m/s Working wind speed: 3-25m/s Survival wind speed: 40m/s Rated wind speed: 10m/s Rated rotate speed: 300r/min Rated output power: 3kw Max output power: 4...

Vendredi 03 juillet 2015

Quantité : minimum 1 - Prix : 2870 $

Rotor Diameter: 5m Number of Blades: 3pcs Material of Blades: Fibre glass expoxy Cut-in wind speed: 3m/s Working wind speed: 3-25m/s Survival wind speed: 40m/s Rated wind speed: 10m/s Rated rotate speed: 260r/min Rated output power: 5kw Max output power: 7.5kw Speed regulation method...

Vendredi 03 juillet 2015

Quantité : minimum 1 - Prix : 6390$

Model Name: FD8-10kw Rotor diameter: 8m Rated wind speed: 12m/s Start up wind speed: 3m/s Rated output power: 10kw Max output power: 17kw Working wind speed: 3m/s-30m/s Survival wind speed: 45m/s Generator type: PMG, 3 Phase AC generator Speed regulation method: Electromagnetic...

Vendredi 03 juillet 2015

Quantité : minimum 1 - Prix : 20800$

30kw pitch control wind generator /wind turbine 30kw - rotor diameter 14m,12m - electric pitch control , electric yawing - Siemens PLC , hydraulic disk brake - gearless, direct drive, 3 phase ac perament magnet - NSK bearing - Siemens brushless yawing motor, Siemens pitch control...

Jeudi 02 juillet 2015

CMA-1910 Laser Engraving & Cutting Machine The goal of developing CM series laser equipments is to fully exert the machine's motion control capability and to further improve the processing quality. The ternet of serving for the field processing is emphasized on every aspects...

Jeudi 02 juillet 2015

CMA-1625F Laser Cutting Bed for Mass Cloth Cutting CMA series laser cutting machine represents the world-class level in terms of stability, precision and speed. CMA1625F laser cutting bed is equipped with auto feeding system and open stainless meshed worktable, especially suitable...

Jeudi 02 juillet 2015

- Quick Details - - Place of Origin: Shaanxi, China (Mainland) - Application: industry - Thickness: 3mm - Width: 1000mm - Length: 2000mm - Technique: Cold Rolled - Grade: GR2 - Ti (Min): 98% - Brand Name: ysti - Model Number: gr2 - thickness: 0.8mm-50.8mm - length...

Jeudi 02 juillet 2015

CMA600-R Plastic Edge Laser Cutting Machine Features 1. Air nozzle system to prevent fire. Keep lens clean and enhance cutting quality. ymhqy2015 2. Protection system and emergency stop button in accordance with international safety standard. 3. Different types of focus heads for selecting...

Mercredi 01 juillet 2015

Quantité : As per Cus - Prix : Affordable

WGSDMCC has marked its presence as a reliable supplier of Fisheries, Animal Feeds, Grains, Pulses, Lentils, Sugar, Rice, Corn, Maize, Sorghum, Poultry primarily to Middle East, Africa, South Asia and Europe. WGS DMCC commitment to quality and its dynamic leadership's experience in...

Mercredi 01 juillet 2015

CMA1325C Medium-power laser cutting machine Features: 1. Gantry type structure, high precision ball screw and linear guiderail with stable and high precision transmission.ymhqy2015 2. Light and solid beam structure with superior dynamic performance, module design offers customized...

Mercredi 01 juillet 2015

CMA 2012-M laser cutting machine Features 1. 32 bit high speed DSP SmartCarve controller is designed to improve performance and achieve stable S type acceleration control movement, Automatic attenuation compensation technique is adopted to to achieve the desired result for different...

Mercredi 01 juillet 2015

Quantité : 9999 - Prix : negotiable

Rock collapse resistance tester Rock Slake Durability Testing machine Slake Durability Apparatus for rock test Slake Durability Apparatus of Rock Purpose: used for testing the durability of the rock disintegration index of test instruments. a.This test method has been developed...

Mercredi 01 juillet 2015

Quantité : 9999 - Prix : negotiable

HHS-1 recycler for chlorylene extracted from asphalt.with centrifugal separation method for asphalt mixture of asphalt content determination, must use trichloroethylene as solution extraction for asphalt mixture. Technical parameters: 1,Mains voltage: 220V 2,Range of temperature control...