VERTICAL - 8992 Annonces

Jeudi 23 avril 2015

1.gear for water-cooling 2.novel design, compact structure, inter-series universal and interchangeable. 3.water-base, good heat dissipation. 4.rolling bearings and transmission gear can add oil . Equipment configuration: Structure type: vertical type or Horizontal type Chamber type...

Jeudi 23 avril 2015

Reasonable configuration for the vacuum system. High pumping speed, high efficiency, energy saving, full automatic process controller can be simple, reliable, beautiful. operational Principle : The evaporation material (for example: Aluminum wire) vaporized and evaporated by high...

Jeudi 23 avril 2015

It can be widely used in high-grade decorative and functional films for watch, glasses , communications, electronics, machinery, decoration and transportation aviation and other industries. Operational principle: Sputtering is physical phenomenon that electron collide with argon...

Jeudi 23 avril 2015

GDC-J electromagnetic high vacuum damper valve is used to open or close the valve by electromagnetic and spring-return force, applying itself to open or cut off the air current within the Vacuum system. It allows to bear the atmospheric pressure over the valve sealed surface while...

Jeudi 23 avril 2015

DYC-Q series low vacuum electro-magnetic pressure difference valve is a new vacuum valve which has been installed in the gas inlet of the mechanical pump. The working principle is the valve and pump should be connected in the same power . When the pump stops working or power supply...

Jeudi 23 avril 2015

GDQ-J is angle type and GDQ-S is three-way type with prepumping. Applicable medium can be air and noncorrosive gases. GDQ pneumatic high vacuum damper valve(Angle Valve), motivated by compressed air, pushes the cylinder to up and down move with the valve rod by changing the direction...

Jeudi 23 avril 2015

CVS Rotary vane vacuum pump system is consisted of SV series rotary vane vacuum pump and the vacuum tank or vacuum chamber. It's widely used in vacuum suction and vacuum holding, CNC router. Construction: CVS series Vacuum system adopt SV single-stage rotary vane vacuum pump as host machine...

Jeudi 23 avril 2015

F Series high pressure compound molecular pump is consisted of turbo molecular pump and disc tractive pump. It has two type pumps' characteristics that is, large pumping speed, high compression ratio and high pressure. It expands the application range of the turbo molecular pump...

Jeudi 23 avril 2015

Compound molecular pump FF series FF series compound molecular pump is one of mechanical vacuum pumps which gaining superhigh vacuum by high speed rotator carrying gas molecules. It is constituted by turbo molecular pump and disc tractive pump. It simultaneously got speedy pumping...

Jeudi 23 avril 2015

Prix : USD1200-4000/METRIC

Stainless steel welded industrial pipe is mainly applied in heavy industry projects such as drilling rigs, high buildings, factories, chemical industry... To meet strictly safety and quality standards, Sonha's products are always manufactured in accordance with international standards...

Mercredi 22 avril 2015

- - Localisation : NO.7 Groups of Caojiapeng Neighborhood Committee | Economic and Technological Development Zone of Shimen | Changde | Hunan | China, 410000 changde, Personne à contacter : zoe zangwill, 86 731 88702791

Mercredi 22 avril 2015

Latin Name: Allium sativum L. Appearance: Light Brown Fine Powder Grade: Pharmaceutical grade&food grade Extraction Method: Solvent Extraction Part: seed Active Ingredient: Allicin Specification: 1%-2% by HPLC Alliin: CAS NO.: 556-27-4 MF: C6H11NO3S MW: 177.2178...

Mercredi 22 avril 2015

- - Localisation : NO.7 Groups of Caojiapeng Neighborhood Committee | Economic and Technological Development Zone of Shimen | Changde | Hunan | China, 410000 changde, Personne à contacter : zoe zangwill, 86 731 88702791

Mercredi 22 avril 2015

Quantité : 500kg in s - Prix : negotiation

English name: Red Clover Extract Latin Name: Trifolium pratense L Active ingredients: Isoflavones CAS No.: 977150-97-2 Molecular formula: C22H18O12 Molecular Weight: 474.37 Specification: 2.5% 8% 20% 40% Use Part : Aerial parts Appearance: Brownish-green to black fine power Mesh size...

Mercredi 22 avril 2015

Product description: 1 Metal materials melting and casting under the condition of vacuum It is widely used to do experiments, the metallic and non-metallic materials research and development. For example, do the experiment and research on amorphous thin belt, fast hardening powder...

Mercredi 22 avril 2015

Product description: 1 Using turbo molecular pump system, the ultimate vacuum 6 x 10-4 pa or less, when separately evacuated arc melting chamber separately or electromagnetic levitation melting chamber,the ultimate vacuum 2 x 10-4 pa or less. 2 The arc melting chamber complete...

Mercredi 22 avril 2015

Product description: The equipment is widely used in aerospace, aviation, electronics and other industries components dealing. Using double water-cooled, electric lift, bell vertical stainless steel structure,three heating districts adopt Y -connection,type Y connection of three heating...

Mercredi 22 avril 2015

Application: this equipment is mainly composed of a vacuum chamber system, vacuum suction and measurement system, heating and temperature control system, electric control system, pneumatic system and auxiliary system, etc. The equipment is used for device vacuum degassing, annealing...

Mercredi 22 avril 2015

Main technical data of Vacuum thermal resistance furnace Model Effective working dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate (pa/h) Heating power (KW) Working pressure (T) Temperature uniformity (℃) RVY-113 100×100×300 2000 5×10-3 0...

Mercredi 22 avril 2015

Main technical data of Induction vacuum hot-pressing furnace Model Effective Working dimension (mm) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW0 IF frequency (HZ) Working Pressure (T) Dimension (m) RVIY-60 200×250 ...)

Mercredi 22 avril 2015

Main technical data of Vacuum dehydroxy furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Temperature Uniformity(℃) Vertical RVSJ-50×70 Φ500×700 1300 2×10-3 0.5 ±5 Vertical RVSJ-11×11 Φ1100×1100 1300 2×10-3 0...

Mercredi 22 avril 2015

Main technical data of Vacuum vapor deposition furnace Model Effective working dimension mm(Φ×H) Max temperature ( ℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIC-100 350×700 1800 7×10-1 0...

Mercredi 22 avril 2015

Main technical data of Vacuum induction high-temperature graphite furnace Model Effective working dimension mm(Φ×H) Max temperature(℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIG-100 200×300...

Mercredi 22 avril 2015

Main technical data of Vacuum pyrolysis furnace Model Effective working dimension mm(Φ×H) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIP-80 600×800 1000 5 1.5 160...

Mercredi 22 avril 2015

Main technical data of low temperature vacuum soldering furnace Model Effective working dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate (pa/h) Temperature uniformity (℃) RVSL-459 450×450×900 850 8.0×10-4 0.5 ±3 RVSL-669 ...

Mercredi 22 avril 2015

Main technical data of high temperature vacuum soldering furnace Model Effective working dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate (pa/h) Temperature uniformity (℃) RVSB-459 450×450×900 1300 8.5×10-4 0.5 ±3 RVSB-559...

Mercredi 22 avril 2015

Main technical data of Vacuum switching tube brazing furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Temperature Uniformity(℃) RVSB-456G 400×500×600 1100 2×10-4 0.1 ±5 RVSB-669G 600×600×900 1100 2×10-4 0...

Mercredi 22 avril 2015

Product description: It is mainly used in the melting, rapid quenching or thrown belting process of Rare earth permanent magnetsNdFeB , hydrogen storage alloy, nickel base material, high temperature alloy etc.materials under the condition of vacuum or inert gas filling. Main configuration...

Mercredi 22 avril 2015

Product description: It is mainly used in the melting, rapid quenching or thrown belting process of Rare earth permanent magnets NdFeB , hydrogen storage alloy, nickel base material, high temperature alloy etc.materials under the condition of vacuum or inert gas filling. Main configuration...

Mercredi 22 avril 2015

Main technical data of Vacuum annealing furnace Models Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate (pa/h) Temperature uniformity (℃) Loading capacity (kg) RVST-448G 400×400×800 1300 2×10-3 0.5 ±5 300...