PERFORMANCE SYS - 17412 Annonces

Dimanche 30 octobre 2022

Product solid picture of straight to PCB (S Type Connector) Product solid picture of straight to PCB (S Type) Outline dimension dimension note: all dimension in mm Part no. A B C Part no. A B C R04-9P/9PIS 19.8 14.3 5.4 R04-9RH/9RHS 19.8 14.3 5.4 R04-15PI/15PIS 23...

Samedi 29 octobre 2022

Quantité : 500tons - Prix : USD0.015-----USD100

China neodymium ring magnet mean the magnets that in a ring shape, someone calls them magnet rings. Strong ring magnets is one of the common types of permanent magnets. The neodymium ring magnets (neodymium magnetic rings) are more and more used today. They are just high-performance...

Samedi 29 octobre 2022

Quantité : 500tons - Prix : USD0.015-----USD100

Disc magnets are permanent magnets that in a disc shape, it sometimes called as magnet discs and magnet disks. The neodymium disc magnets are the disc magnets made from neodymium magnetic material, it also called disc neodymium magnets, the disc is the most common shape for NdFeB magnets...

Samedi 29 octobre 2022

Quantité : 500tons - Prix : USD0.015-----USD100

Cube magnets(cubic magnets) are special block magnets, which have the same sizes for length, width, and height. They are also called as magnet cube/cubic blocks. The neodymium cube magnets are the strongest cube magnets, they are made from bigger neodymium magnet blocks by cutting...

Samedi 29 octobre 2022

Prix : talk in detail

Sheet metal has the characteristics of lightweight, high strength, electrical conductivity (can be used for electromagnetic shielding), low cost, and large-scale mass production performance. With the increasing use of sheet metal, the design of sheet metal cabinet has become an important...

Samedi 29 octobre 2022

This machine is able to bend the flange sheet metal to get three folds, and it's also considered as a general crimping machine. Hand Folding Machine Performance Feature: Hand operated bending machine is usually used to fold 1.5 mm thick sheet metal to finish HVAC air duct sheet plate...

Samedi 29 octobre 2022

The machine is overall steel-welded and gate-type with chain drive. The motor has its own brake, which means no power consuming when not shearing. It's suitable for processing sheet metal less than 3mm in thickness. Electric Shearing Machine Performance Feature: The sheet metal shearing...

Samedi 29 octobre 2022

Pre-bending function makes straight edges narrower, and it can even round small round pipe with diameter of 100mm. Combined with manual worm gear and eccentric wheel device, the machine can quickly move side rollers up and down to improve efficiency. Flange Rolling Machine Performance Features...

Samedi 29 octobre 2022

Electric Lock Seaming Machine Performance Feature: Electric seam locker machine can lock square HVAC air duct. The sheet thickness range is 0.3-1.2 millimeters. This machine is small and very easy to operate. It's suitable for lock closing duct on site due to convenient to move...

Samedi 29 octobre 2022

Duct Corner Punching Machine Performance Features: Model Pressure(KN) Dimension of die holder(mm) Slider stroke Slider stroke times Power(kW) Dimensions(mm) L*W*H J23-25T 250 40*60 70 60 2.2 1220*920*2060 J23-40T 400 50*70 100 50 3 1320*970*2380 J23 series...

Samedi 29 octobre 2022

It's mainly for automatically lofting and cutting the deformed workpiece. You can select a drawing from the new version of CAM-DUCT and input dimensions and choose a way of connection, then the software will start calculating, composing, jacking and cutting automatically according...

Samedi 29 octobre 2022

CNC Angle Steel Production Line Performance Features: Fully automatic angle steel flange production line, or CNC angle steel flange production line, is mainly for punching and cutting duct angle steel flange. The machine are designed to feed, punch, cut automatically in order to...

Samedi 29 octobre 2022

Prix : 100USD

What is Particle Size and Particle Size Distribution? Particle size indicates how small (or big) a particle is. The unit is usually mm, μm or nm. The particle diameter is the most common parameter usually used to describe particle size. Particle size distribution is characterized...

Samedi 29 octobre 2022

Prix : 100USD

The Nanoptic 90 Plus (nanoparticle sizer) is an optical detection system newly designed to measure the particle size and size distribution of nanoparticles. Measurement: Particle size and size distribution Particle size range: 0.4 nm - 9 um Testing speed: ≤ 5 minutes per test Small...

Samedi 29 octobre 2022

- Grind's Saw Diamond Grit series are with cube-octahedron particles, for stone and construction engineering industries such as Granite, Marble, Concrete, Asphalt, Bricks etc. The synthetic diamond grit provides premium thermal stability and impacts resistance performance. E-Grind...

Samedi 29 octobre 2022

Resin bond microndiamond is made from Diamond Resin Bond Mesh. It has a multi-crystalline structure, rough surface, and uniform shape. The sharp edges always generate during cutting, grinding, lapping, and finishing. With such unique characteristics, Diamond Resin bond micron provides...

Samedi 29 octobre 2022

- Grind supplies the whole range of and PCDN blanks for cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available can be 55mm. Our PCD blanks and PCDN blanks provide high wearing resistance ability and high finishing surface. Application of PCD Blanks Our...

Samedi 29 octobre 2022

Riken RMC C35P water sandpaper is a waterproof abrasive paper; using imported Latex paper. It's mainly used for wet or dry sandpaper. Features of C35P Water Sandpaper Riken RMC C35P water sandpaper has a feature of very strong softness due to its abrasive paper grit. The inherent...

Samedi 29 octobre 2022

Rosun water disinfectant powder is an advanced oxidation technology basing on sulfate radical [SO4-], using potassium monopersulfate compound powder (2KHSO5.KHSO4.K2SO4)as its active ingredient. By using high-energy activation technology to produce active oxygen [O] through the...

Vendredi 28 octobre 2022

Quantité : 100k Month - Prix : 10-80

Low Power Consumption, Strong Performance. Read all Mainstream 1D/2D Barcodes. Fast Mobile Phone Screen Barcode Reading. Build in RS232 and USB Interface. Details of Superlead 2620BT long range handheld barcode scanner With 200 Meters Application scenarios: convenience stores, supermarkets...

Vendredi 28 octobre 2022

Quantité : 100k Month - Prix : 10-80

Details of Superlead QR Code Reading Small White Box 7180 Professional Mobile Phone Reader Large Field of View Specification of Superlead QR Code Reading Small White Box 7180 Suzhou SuperMax Smart System Co., Ltd. 7180 Technical Specification Physical Characteristics Dimensions...

Vendredi 28 octobre 2022

Quantité : 100k Month - Prix : 10-80

Multiple Language Barcode Message Transfer Object Auto Sense of the industrial handheld barcode scanner Accurate Aimer of the industrial barcode scanner Cellphone Sscreen Barcode Reading Read all Mainstream 1D/2D Barcodes Extremely Easy to Use Specification of Superlead Industrial...

Vendredi 28 octobre 2022

Quantité : 100

HBTE offers a wide range of advanced positioning equipments: single axis, dual-axis, and multi-axis rotary positioners, antenna masts, and linear of various lengths. Positioning equipment is a kind of complex modern equipment with mechatronics, which plays a key role in the field...

Vendredi 28 octobre 2022

Quantité : 100

HBT technology pneumatic shielded box is made by sheet metal process, which has good shielded sealing and strong structure. It is the switch of the pneumatic control box door, which can improve test efficiency and reduce operator fatigue. Pneumatic shield box supports RS232 serial...

Vendredi 28 octobre 2022

Quantité : 100

RF Components Definition HBTE have sincerely supplied commercial companies, education and research institutions with authentic rf passive components and cables for decades. We always take pride ourselves in offering you the top-quality products with reasonable prices, outstanding...

Vendredi 28 octobre 2022

Quantité : 100

OTA System OTA test equipment is an important test in wireless device certification. After CTIA has formulated the OTA standards,more and more attention has been paid to the radiation performance test of the entire device in the wireless performance test,which reflects the final transmitting...

Vendredi 28 octobre 2022

Get in touch with Mac Email :  at@mooreplc.com Mac (sales manager) | Mobile : 86-18020714662 QQ : 2851683130 | Whatsapp : 86-18020714662 WeChat : 86 18020714662 | Skype : 86-18020714662 ➪ Request a quote for this module ➪ Siemens (Germany) Product Details Brand: Yokogawa Item No...

Vendredi 28 octobre 2022

Get in touch with Mac Email :  at@mooreplc.com Mac (sales manager) | Mobile : 86-18020714662 QQ : 2851683130 | Whatsapp : 86-18020714662 WeChat : 86 18020714662 | Skype : 86-18020714662 ➪ Request a quote for this module ➪ Siemens (Germany) Product Details Brand: Yokogawa Item No...

Vendredi 28 octobre 2022

Get in touch with Mac Email :  at@mooreplc.com Mac (sales manager) | Mobile : 86-18020714662 QQ : 2851683130 | Whatsapp : 86-18020714662 WeChat : 86 18020714662 | Skype : 86-18020714662 ➪ Request a quote for this module ➪ Siemens (Germany) Product Details Brand: YOKOGAWA Part Number...

Vendredi 28 octobre 2022

Get in touch with Mac Email :  at@mooreplc.com Mac (sales manager) | Mobile : 86-18020714662 QQ : 2851683130 | Whatsapp : 86-18020714662 WeChat : 86 18020714662 | Skype : 86-18020714662 ➪ Request a quote for this module ➪ Siemens (Germany) Product Details Brand: Yokogawa Item No...