MOLD|FILTER - 8164 Annonces

Mercredi 29 avril 2015

vApplication: ZYD double stages vacuum transformer oil purification machine adopts advanced and unique technology, two horizontal vacuum towers, which speed up the dewatering and degassing more quickly and completely than normal type. It has functions of vacuum dehydration, degasification...

Mardi 28 avril 2015

Quantité : 100000 - Prix : negotiation

sapphire square windows process -Sen Hishi supplier Typical Applications: 1 Gas and air analyzer / monitor; 2 Purple / Infrared Detectors; 3 IPL optical and filter; 4 Barcode Scanner; 5 Epitaxial substrate; 6 LED 7 High Brightness Light; 8 Sensor; Material: Sapphire,magnesium fluoride...

Mardi 28 avril 2015

Quantité : 100000 - Prix : negotiation

Rectangular Germanium Windows -Sen Hishi supplier manufcture in Shenzhen Typical Applications: 1 Gas and air analyzer / monitor; 2 Purple / Infrared Detectors; 3 IPL optical and filter; 4 Barcode Scanner; 5 Epitaxial substrate; 6 LED 7 High Brightness Light; 8 Sensor; Material: Sapphire...

Jeudi 23 avril 2015

Electron beam evaporation has high thermal efficiency, beam density, fast evaporation speed and higher purity comparing with average resistance heating evaporation Operational principle: Material in water-cooled copper crucible, directly using electron beam heating. Electron beam...

Jeudi 23 avril 2015

Oil separator main function is to remove the air of the solid dust, oil and gas particles and liquid substances. SIZE: 72*L130 72*L200 72*L250 72*L375 Localisation : Room 502,No.1299,XinJinQiao RD, Pudong New Area, ShangHai, China., 201206 ShangHai, Personne à contacter : Martin Miao...

Jeudi 23 avril 2015

Vacuum inlet filters are designed to enable the granular particles from the vacuum pump into the vacuum chamber and damage the structure of components and sophisticated. The product uses German advanced technology, high filtration efficiency and good effectiveness, compact structure...

Jeudi 23 avril 2015

VAF Vacuum liquid and dust filter is special designed for the pump to avoid the liquid, liquid vapor and dust damage vacuum pump components and precision structure. The product adopt advanced international cyclone vane to separate liquid and impurities, and porous stainless steel...

Jeudi 23 avril 2015

JZP2H is roots and rotary piston vacuum pump system. The unit used in transformer, coating, smelting, heat treatment, drying, distillation, such as aviation simulation test. Roots and Rotary piston vacuum pump system has a remarkable energy saving effect. It has very fast pumping...

Jeudi 23 avril 2015

2H series double stage rotary piston vacuum pump is a vacuum pump that can exhaust normal gas and gas containing a small amount condensable vapor (gas ballast device should be used). Applications: It's suitable for vacuum smelting, vacuum drying, vacuum coating, electrician, electron...

Jeudi 23 avril 2015

2X series rotary vane vacuum pumps are used for pumping gas in the specific sealed container and obtain certain vacuum. Applications: They're not only used for refrigerators, air conditioners, light bulbs, fluorescent lamps, bottles of bile to production, but also used for metallurgy...

Jeudi 23 avril 2015

H Series Piston Vacuum Pump is a single stage rotary piston vacuum pump, namely sliding vane vacuum pump. Applications: It's suitable for vacuum smelting, vacuum drying, vacuum coating, electrician, electron, metallurgy, chemical industry, ceramic, aviation, laboratory and other...

Mercredi 22 avril 2015

Product Information Medisystem series Central vacuum systems for hospital from 45 to 1.080 m3/h.with three pumps. Thanks to our experience developed in over forty years of vacuum pumps manufacturing, we have designed central vacuum systems series MEDISYSTEM. Manufactured in observance...

Mercredi 22 avril 2015

Product Information Centralized vacuum equipment CPA 3x151/1000V VACUUMSYSTEM CPA 3x151/1000V Serbatoio disposto verticalmente Information about: CPA TRIPLEX CPA triple pump vacuum systems are primarily used as vacuum systems for hospital applications. These groups have been...

Mercredi 22 avril 2015

Product Information CPA 3X106/1000V VACUUM SYSTEM CPA 3X106/1000 Centralized vacuum equipment Serbatoio disposto verticalmente Information about: CPA TRIPLEX CPA triple pump vacuum systems are primarily used as vacuum systems for hospital applications. These groups have been...

Mercredi 22 avril 2015

Product Information Centralized vacuum equipment CPA 2X205/1000V VACUUM SYSTEM CPA 2X205/1000V CPA 2x205/1000V - CPA 2x305/1000V: Serbatoio disposto verticalmente Information about: CPA DUPLEX CPA vacuum systems with dual pump are mainly used in centralized vacuum systems as units...

Mercredi 22 avril 2015

Main technical data of Induction vacuum hot-pressing furnace Model Effective Working dimension (mm) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW0 IF frequency (HZ) Working Pressure (T) Dimension (m) RVIY-60 200×250 ...)

Mercredi 22 avril 2015

Main technical data of Vacuum vapor deposition furnace Model Effective working dimension mm(Φ×H) Max temperature ( ℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIC-100 350×700 1800 7×10-1 0...

Mercredi 22 avril 2015

Main technical data of of Cycle vacuum induction melting furnace Model Capacity (Kg) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF voltage (V) IF frequency (HZ) Dimensions m( L×W×H) RVI-10 10 1850 6×10-3 0.67...

Mercredi 22 avril 2015

Sieve for sieving large-scale mechanical structure strength put forward high requirements, common filter mechanical structure has been difficult to meet this requirement.Sieve for sieving large-scale mechanical structure strength put forward high requirements, common filter mechanical...

Mardi 21 avril 2015

Specification: 1.The multi-slide die-casting machine 2.Assure the mold life of 1000K shot 3.Be specific in the miniature zinc alloy part 4.We provide the mold design and fabricate 5.OEM service Localisation : Room D,12F,First Trading Building,No.985 DongFang Rd, Pu-Dong, Shanghai...

Dimanche 19 avril 2015

Quantité : 100 units - Prix : Negotiable

Hitop est un ISO 9001: 2000 certifié fabricant de moules, privée avec une usine ultra-of-the-art production en Chine. Hitop vous donne les avantages de la baisse des coûts couplés aux normes d'ingénierie et de production élevées attendues dans la européen et nord-américain. La...

Vendredi 17 avril 2015

Quantité : 500

Principales caractéristiques : Modele de caméra 720p AHD 2431H + solution HD 5130 PixArt avec la fonction WDR, OSD prendre en charge 12 langues Spécifications : Capteur d'image HD 5130 PixArt ; Qualité d'image HD 720p et résolution de 1280 * 960, OSD prennent en charge pour 12 langues ...

Vendredi 17 avril 2015

Quantité : 500

Principales caractéristiques : Antioxydant OSP PCB Solution d'h + SONY IMX222 HD 2441 2.0MP module de caméra HD anagolg AHD module de caméra surveillance systèmes: CCTV produits-1/3 SONY 2.0MP HD AHD Spécifications : Capteur d'image 1/3 SONY IMX222 1080p HD ; La résolution...

Jeudi 16 avril 2015

Quantité : 1set - Prix : 21600rmb

- Specifications - Grease Adding Equipment: 1,Advanced technology 2, Make the pellet more attractable 3,Low costs 1. The grease addition can be adjusted and high accuracy; 2. The coarse and fine filters are used for input and output line to remove impurities and prevent from...

Jeudi 16 avril 2015

At present, facing the world face a common challenge of environmental deterioration, environmental protection is not the industry boundaries, all walks of life should try to achieve the protection of the environment, looking for the best interests of points in the contradiction of...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...