CHEMICAL - 8996 Annonces

Jeudi 17 mars 2016

Amorphous Calcium Aluminate Keywords amorphous calcium aluminate, non crystalline calcium aluminate, non crystallized calcium aluminate, amorphous C12A7, ACA, concrete accelerator, CAS No. 12042-68-1, cement addititve, shotcrete additive, concrete additives. trademark: hnkingway Description...

Mercredi 16 mars 2016

Quantité : 1-20 - Prix : 40000-200000 usd

Advantages: 1. Can both produce the diesel oil and base oil 2. The machine can recycle all kinds of engine oil, motor oil, lube oil, tire oil, pyrolysis oil, heavy fuel oil, gear oil, machine oil etc. . 3. Low cost, cost is 30$ for refine one tons used lube oil. 4. Easy to operate...

Mercredi 16 mars 2016

Quantité : 1000000 - Prix : 75,00 €

High speed Corrugator Belt With Kevlar Edge is a consistent development bason on the high speed corr ugator belt.It is ideal for corrugating systems with high production speed,even load systems and fre quently changing paperboard widths.the belt's edge reinforcement of kevlar fibers...

Mardi 15 mars 2016

Quantité : 100sets/ye - Prix : Negotiatable

Introduction Compound crusher is a comprehensive domestic and foreign similar technology, the main technical parameters to optimize the design developed from the new crushing, coarse grinding products, mainly for medium-sized cement crushing cement raw material, clinker. It provide...

Samedi 12 mars 2016

Quantité : 50sets/yea - Prix : Negotiatable

Application The equipment structures of manganese ore briquette machine are similar to the coal briquette machine, dry powder briquette machine and other briquette machine. It can be used for pressing coal powder, iron powder, coking coal, aluminite powder, scrap iron, oxide-scale...

Samedi 12 mars 2016

Quantité : 50sets/yea - Prix : Negotiatable

Application Sawdust pressure ball machine can be used to suppress sawdust, coke, rice husk and other powder, powder material, scrap, waste, widely used in refractory, power plants, metallurgy, chemical industry, energy, transport, heating and other industries, materials after the...

Samedi 12 mars 2016

Quantité : 50sets/yea - Prix : Negotiatable

Application Flue dust briquette machine is using for press the coal powder, iron powder, coking coal, aluminite powder, scrap iron, oxide-scale, carbon powder, charcoal powder, slag, gypsum, tailings, sludge, Kaolin, activated carbon, dust coke and all kinds of powder, powder materials...

Samedi 12 mars 2016

Quantité : 50sets/yea - Prix : Negotiatable

Structure of Iron Powder Briquette Machine Feeder system--- achieved dosing feeder to ensure the iron powder feed evenly. Matching motor--- fine iron powder briquette machine the constant of the electromagnetic motor seed control until the weight of the feeder is equal to the needed weight...

Samedi 12 mars 2016

Quantité : 200kgs - Prix : 10.68usd

food grade silicone rubber for cake molding Food grade Silicone Rubber cure at room temperature with negligible shrinkage. With different hardne sses to choose from, OTT products offer tremendous versatility and are suitable for making productio n molds of any configuration, large or small...

Samedi 12 mars 2016

Laizhou xinyuan machinery factory is a collection of casting and machining for the integration of large-scale private joint-stock enterprise. Company is located in the beautiful coastal city of Laizhou, in the north of Qingdao city, Qingdao port is only 150 km, very convenient....

Samedi 12 mars 2016

Quantité : 1set - Prix : Negotiatable

Introduction FuYu dry powder ball press machine can be used for pressing various powdered materials that have low moisture content : lime powder, coal powder, iron powder, coke, aluminum, iron, iron oxide, carbon powder, charcoal powder, slag, gypsum, tailings, sewage sludge, kaolin...

Vendredi 11 mars 2016

Quantité : 2000 - Prix : USD 6.5

5 In 1 Face Massager Rotating Cleansing Electric Facial Cleaning Wash Brush welcome OEM Product Description Our 5 In 1 Face Massager Rotating Cleansing Electric Facial Cleaning Wash Brush welcome OEM is powered by 4 pcs battery,3 adjustable speed,waterproof IPX 7,easy and conveientto...

Vendredi 11 mars 2016

Quantité : 2000 - Prix : USD 6.5

Hot New Beauty Proructs for 2016 Waterproof Spin Skin Cleansing Face and Body Brush Product Description Our Hot New Beauty Proructs for 2016 Waterproof Spin Skin Cleansing Face and Body Brush is powered by 4 pcs battery,3 adjustable speed,waterproof IPX 7,easy and conveient to use and store...

Vendredi 11 mars 2016

Quantité : 2000 - Prix : USD 6.5

2016 Newest Hot Sale ABS Material 5 in 1 Facial Fachine Exfoliating Brush Product Description Our 2016 Newest Hot Sale ABS Material 5 in 1 Facial Fachine Exfoliating Brush is powered by 4 pcs battery,3 adjustable speed,waterproof IPX 7,easy and conveient to use and store, can...

Vendredi 11 mars 2016

Quantité : 2000 - Prix : USD 6.5

Localisation : Floor 2-3,NO.80 Baoshi East Road,Shiyan Street,Bao'an District,Shenzhen,Guangdong,China, 518109 Shiyan, Personne à contacter : Cherry liu, 0755 27526671

Vendredi 11 mars 2016

There are two kinds of PTFE rods to offer. One is manufactured by Paste extruding method in the diameter from 4 to 9mm and the other Is made by ram extruding method is the diameter from 10to 50mm; rods Over the diameter 50mm are manufactured by moulding. PTFE is the most chemical-resistant...

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Mercredi 09 mars 2016

Quantité : 20000piece - Prix : 13-25/piece

Material : 100% Cotton 100% cotton flame resistant fabric Feature: Anti-Static, Anti-UV, Blackout, Flame Retardant, Fusible, Heat-Insulation, Shrink-Resistant, Tear-Resistant, Waterproof Use: Cover, Curtain, Garment, Industry, Jean, Lining, Raincoat, Color: all color is available...

Mardi 08 mars 2016

Main Features: JM series spinning extruder is applicable to the chip of PETP,PA6,PA66,PP etc. melting and spinning. Adopting good quality material,advanced design and processing technology makes our spinnin g extruders widely used for big project of chemical fiber successfully....

Vendredi 04 mars 2016

Quantité : 32 pcs/ctn - Prix : 5.8USD/pc

The battle of the mice and men is over! THIS REALLY WORKS! A much more humane way to keep pests away. Just plug the RATMAN HCR-021 ULTRASONIC PEST REPELLER in the outlet and it will repel mice and rats away from your home. No harsh chemicals, No gross looking traps set up around...

Jeudi 03 mars 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Jeudi 03 mars 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Jeudi 03 mars 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Mardi 01 mars 2016

Quantité : 999

Product Description AMITTARI l Whiteness Meter is mainly used to directly measure the whiteness value of object or powde r with flat surface. It can be widely used in whiteness measurement of textile printing and dyeing, paint, chemical building materials, paper board, plastic products...

Dimanche 28 février 2016

Before the curing Appearance A: Trasparent B: Blue Relative Density 0.96～1.00(g/cm3) Viscosity At 25℃ A: 650~850 B: 650~850 (mPa·s) After the curing Degree 240~280 Fire resistance Flameout Time ＜16s curing time ＜2h Complete time ＞4h 1.Features ZS-GN01A/B is a kind...

Dimanche 28 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Dimanche 28 février 2016

Prix : 20$

Basic information: CAS# : 13463-67-7 Property: This product is a dedicated cosmetic titanium dioxide; it can effectively prevent the damage of UV o n human skin. This product is non-toxic and harmless, and has an excellent compatibility with other raw materials of cosmetic. Because...

Samedi 27 février 2016

Quantité : 1 piece - Prix : 54$

Materials: Steel Surface treatment: Zinc HITOAUTO is a ISO/TS 16949: 2009 certified company with specializes in the truck body pats, commercial van body parts, curtain side van parts, refrigerated truck parts, wing body truck parts, container parts and so on.. Products include hinges ...