DRILLING - 2501 Annonces

Mercredi 01 mars 2023

Prix : 1000-6000USD

Small tapered roller bearings belong to precision parts, so it is required to be cautious in use even with high-performance bearing. If it is used improperly, the expected performance effect can not be achieved, and the bearing is easy to be damaged. Therefore, the use of small tapered...

Mercredi 01 mars 2023

Prix : 1000-6000USD

BW Mud Pump The BW pump belongs to piston pump, and have the function of common mud pump. BW Mud Pump Common Model Commonly used models are BW-150 mud pump, BW-160 mud pump, BW200 mud pump, BW-250 mud pump, BW320 mud pump, etc. It can be used in the field of geological exploration...

Mercredi 01 mars 2023

Prix : 1000-6000USD

Brief Introduction and Characteristics of Reciprocating Pump Single and double acting reciprocating pump relies on the reciprocating operation of plug or plunger pump cylinder to periodically expand the working volume of pump cylinder and shrink the suction and discharge liquid reciprocating...

Mardi 28 février 2023

Automatic Drilling and Tapping Machine The manipulator is applied to the opening and plugging of the slag port in a copper smelting furnace. According to the copper smelting furnace slag port manual operation process and used tools, we developed hole digging robotic arm, which uses...

Samedi 25 février 2023

Cannulated Screw System Cannulated screws are a common method of fixation used by orthopedic surgeons for multiple fracture patterns. These screws may be cannulated or "hollow" to allow them to be placed over a guidewire facilitating better alignment prior to drilling or screw insertion...

Samedi 25 février 2023

Scan Screw For External In an external fixator, metal pins or screws are placed into the bone through small incisions into the skin and muscle. The pins and screws are attached to a bar outside the skin. Because pins are inserted into the bone, external fixators differ from casts...

Jeudi 23 février 2023

Scientists Have Developed Nano-cubic Boron Nitride Harder Than Diamond Diamonds will no longer be the hardest substance in the world! At present, scientists have artificially synthesized nano-scale cubic boron nitride, which has exceeded the hardness of diamonds. According to the...

Mercredi 22 février 2023

These is the Rapid Prototype Machined Parts Machining parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 34mm*53mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Professional CNC Prototype Machining...

Mercredi 22 février 2023

These are the High Precision CNC Milling Machine parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 54mm*52mm Raw material: Aluminum 7075 Surface Treatment: clear anodizing Finish: anodizing Specifications of Precision Metal CNC Machining, CNC Milling ...

Mercredi 22 février 2023

This is the Precision CNC Turning Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 46mm*76mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Precision CNC Turning Parts Type: Broaching, Drilling...

Mercredi 22 février 2023

This is the Mighty Precision Machining Parts Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 56mm*45mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Precision CNC Machineing Parts Type: Broaching...

Mercredi 22 février 2023

This is the High Precision CNC Lathe Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 39mm*49mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Precision CNC Lathing Parts Type: Broaching, Drilling...

Mercredi 22 février 2023

This is the Precision CNC Lathe Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 36mm*38mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Precision CNC Lathing Part Type: Broaching, Drilling...

Mercredi 22 février 2023

This is the OEM manufacturer 5 axis cnc turning machine stainless steel/brass threaded rod auto parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 49mm*52mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications...

Mercredi 22 février 2023

This is the OEM custom manufacturer 5AXIS CNC machining and milling 4140 steel barrel extensions for Aerospace parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 55mm*45mm Raw material: 4140 steel Surface Treatment: clear anodizing Finish: anodizing...

Mardi 21 février 2023

CNC boring is used for the shaft sleeve in the transmission shaft of large equipment, and the tolerance of the bearing position is +0.03mm. After welding the accessories, use CNC horizontal boring and milling equipment to process both sides with a concentricity of 0.05mm. CNC Boring...

Samedi 18 février 2023

Prix : 5000-50000USD

The roller reamer is also called the expander squint drill. It is a tool used for reaming while drilling in oil wells. It is different from the reaming drill installed in the lower part of the drill string, but is mounted in the middle of the drill string and has a diameter slightly...

Samedi 18 février 2023

Prix : 5000-50000USD

What Is Xmas Tree Oil and Gas The xmas tree wellhead is a wellhead device used to extract oil from wells and machine wells. It is the main equipment for controlling and regulating oil and gas production in the upper part of oil and gas wells. It mainly consists of casing head, tubing...

Samedi 18 février 2023

Prix : 5000-50000USD

A Few Words about Wellhead Equipment A wellhead is a component located on the surface of oil or gas well, which provides structure and pressure bearing interface for drilling and production equipment. The main purpose of using the wellhead is to provide a peadant point and pressure...

Samedi 18 février 2023

During saver sub drilling operation, major wear and tear wear often take place between drill and casings. Wear sub is used to avoid the wear between drill , tool joints and casings. With features such as compact structure and easy operating, wear sub can prolong the service life of...

Samedi 18 février 2023

Prix : 5000-50000USD

SAIGAO GROUP offers a full range of valves for drilling and production operations. Gate valves are designed and manufactured in accordance with API 6A latest edition PSL 1-4 while the robust, simple and reliable gate and seat design promotes ease of service with in-line maintenance...

Samedi 18 février 2023

Prix : 5000-50000USD

Tubing: A pipe used in oil wells for oil recovery, gas production, water injection, and acid fracturing. Casing: A pipe that has been drilled into the wall from the surface of the ground to prevent the wall from collapsing. Drill pipe: A pipe used for drilling a hole. Line pipe: A...

Samedi 18 février 2023

Prix : 5000-50000USD

Tubing head assembly is applied to hang different tubing. It combined with casing head and some accessories, which can be used in tubing fracturing wellhead, annular space fracturing wellhead, and mixed fracturing wellhead. Tubing head can be equipped with tapered or vertical tubing...

Vendredi 17 février 2023

Horizontal Directional Drilling (hdd drill bit) is not excavation surface conditions, the laying of a variety of underground utilities (, cables, etc.) of a drilling way, it is widely used in water supply, electricity, telecommunications, gas, gas, oil and other pipeline construction...

Vendredi 17 février 2023

Geothermal drilling characteristics of geothermal drilling the main oil and gas well drilling technology for reference, because the heat reservoir rock geological conditions, such as lithology, buried depth and output fluid property is different, compared with more demanding conditions...

Vendredi 17 février 2023

Overview of Tricone Bit Tricone bit is mainly used in drilling, exploration, petroleum and trenchless as pilot bit. According to cutting material, Tricone bit can be divided into TCI bit and Steel tooth Bit. TCI bit adopts high-strength and high-toughness hard alloy teeth, optimized...

Vendredi 17 février 2023

Overview of tci bits Tci tricone drill bits is an important tool for oil drilling. When the cone bit is working, the cutting teeth alternately contact the bottom of the well, the rock breaking torque is small, the contact area between the cutting teeth and the bottom of the well is small...

Vendredi 17 février 2023

Overview of Steel Tooth Bit This superior method provides a stronger, more impact-resistant tooth than milling because the metal particle structure during forging is protected, resulting in stronger teeth. The details of Steel tooth Bit. GREAT heat treatment process selectively carburizes...

Vendredi 17 février 2023

The Steel body PDC bit body is made of AISI 4145H round steel. The cost of Steel body PDC bit is lower than that of Matrix body PDC bit. Every Steel body bit shall have heat treatment, to improve the mechanical properties of steel, to eliminate residual stress and improve the cutting performance...

Vendredi 17 février 2023

Quantité : Output cap

Customized Ultra-light small size the most harshness environment temperature application in Standard & Non-Standard Parts & Terminal Interconnect Solution Custom Connectors There are many kinds of connectors, including 2pin and 4Pin types, or other numbers of pins, and medical connectors...