CAVITY - 1122 Annonces

Mardi 19 avril 2022

Prototype molds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering...

Mardi 19 avril 2022

Precision mold components is a process that requires high technique and the use of precision molds and precision machines. The process of precision mould is different from normal injection mold but it still belongs to injection mold. It requires strict tolerance of ±0.01 mm and it...

Mardi 19 avril 2022

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts. Multi...

Mardi 19 avril 2022

2k injection molding is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years mold...

Samedi 16 avril 2022

LEFOO diaphragm pump for water purifier 115V is an RO water pump. The diaphragm pump for water purifier 115V is supplied with alternating current (AC), and the AC voltage is capable of being set as a 115v water pressure pump, which is rectified into a direct current (DC) voltage through...

Samedi 16 avril 2022

Longguang' products have a wide range of applications in the automotive field. We also have close cooperation with various automobile industry manufacturers in China over ten years, such as Toyota and Bosch, which has also accumulated a lot of experience and cases in this industry...

Samedi 16 avril 2022

Under many circumstance, due to the limitation of equipment, it is necessary to use manual equipment to grind the parts such as angle grinder. At these time, many small types of brush, such as pipe brush, end brush, we can design the size of the shank according to the specifications...

Jeudi 14 avril 2022

Quantité : 50000 sets - Prix : USD25-80

POER Smart provides the programmable wifi central heating thermostat set. We have wifi water heater thermostats and electric underfloor heating thermostat wifi for your choice. The wifi boiler control thermostat was built-in a wifi module. With this module, the wifi thermostat underfloor...

Mardi 12 avril 2022

Quantité : 1200sets/y - Prix : USD10000-200000

Wire Erosion Machines for Sale DMNC Provides Complete Solution Of EDM Machining Technology With 30+ Years' Experience, Continuous Innovation, Strict Quality Control, and Swift Service. The CNC EDM machine for sale can machine deep ribs faster with more precision, as the CNC incorporates...

Mardi 12 avril 2022

Prix : 100USD

What is exothermic welding supplies Exothermic welding, also called hot melt welding, fire-clay welding, thermite welding and explosion welding, is a high-heat principle that utilizes the redox reaction between metals, the operation of which is simple, easy to learn, safe and efficient...

Jeudi 07 avril 2022

The nozzle of cooling tower is the component of water distribution in the cooling tower, which is made of ABS by one-time injection molding. Socket connection, firm connection, easy disassembly, not easy to block, nozzle water distribution is uniform, using cross water distribution method...

Jeudi 07 avril 2022

Railroad Clip Steel MIM stand for Metal Injection Molding, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press...

Jeudi 07 avril 2022

MIM Products Whether you seek to economically manufacture a high-quality computer component, a small medical instrument, a firearm component, or other metal injection molding products, MIM is an ideal process. Wearability And Smart Wearability In recent years, wearable devices have...

Samedi 02 avril 2022

Quantité : 1000 - Prix : 2000-4500USD

The frequency of the linear array probe is 4-12 MHz, which can be applied on ultrasonic examination of superficial organs, vessels, and tissues, etc. Compared with other linear probes, Stork linear probes have a more professional algorithm platform and GPU framework to ensure clear images...

Samedi 02 avril 2022

Quantité : 1000 - Prix : 2000-4500USD

An ultrasonic sensor or a probe generates sound waves, and the reflections of the sound waves produce clear images of body tissues and organs, which is an important part of the ultrasound system. The following are the three most common ultrasonic probes types: Linear ultrasound probe...

Mardi 29 mars 2022

The vacuum pressure casting, as this name indicates, is casting method which the major processes including the melting, pouring, solidifying are performed inside the vacuum chamber. The vacuum is able to minimum the gas content of the product, and prevent further oxidation happening to the metal...

Mardi 29 mars 2022

The squeeze die casting, also names extrusion casting or liquid die forging, is kind of newly developed metal forming technic which combines the casting process and die forging like method. The basic principle is to fill the liquid metal into the pre-lubricated mold cavity, then gives...

Mercredi 16 mars 2022

Pressure Sensor Definition The pressure sensor produced by Tianguang company can be divided into resistance strain type and diffused silicon type. According to the structure, each type is divided into two types: with a cavity and without a cavity. The cavity has high accuracy and a wide range...

Mercredi 16 mars 2022

Prix : 1000-6000USD

Hot Press Vacuum Press for Sale Hot vacuum press is used for the test parameters of the material properties, including the fluidity of composite materials, resin fluidity, and gel time. The composite material is formed after hot pressing and curing. The parameters of temperature and...

Mercredi 16 mars 2022

Prix : 100USD

Adapter is one of the most important part of G.E.T system, especially the cast lip system. Either made by casting or forging, an adaptor installed between the lip and the tooth. It's nose and pocket support the main structure. WALKSON mainly focus on providing big size cast adaptors...

Mardi 15 mars 2022

Methyl methacrylate china, whose chemical formula is C5H8O2 and chemical formula quantity is 100.12, is an organic compound, also known as MMA, or methyl ester for short. HS code for MMA is 2916140010. MMA methacrylate is an important chemical raw material and the production of...

Vendredi 11 mars 2022

Prix : 100USD

Differential Pressure Gauges Differential vacuum gauge measure the difference between two pressures. They are suitable for the monitoring of filter contamination, for level measurement in closed vessels, for overpressure measurement in clean rooms, for flow measurement of gaseous...

Jeudi 10 mars 2022

AX Series (AX-400, AX-500, AX-600, AX700, AX-800, AX-900) portable anaesthesia machine offers SIMV supports the smooth transition to anesthesia resuscitation, promotes resuscitation efficiency, and reduces lung injury caused by man-machine confrontation. CPAP/PSV supports postoperative...

Jeudi 10 mars 2022

The remarkable Acclarix AX2 & AX3 color doppler ultrasound scanner System delivers a surprising combination of features to meet the demands of point-of-care imaging. It has been designed from the relentless focus on delivering uncompromising performance at a cost-effect price...

Jeudi 10 mars 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

For plastic medical device manufacturers, it means that medical supervisors are required to supervise and manage the materials used to manufacture the equipment, the medical injection molds parts are designed to withstand high temperatures and chemical corrosion. In this way, it...

Jeudi 10 mars 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Gas & Water assisted injection molding Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection cycle of water-assisted is about 70% shorter than the injection cycle of gas-assisted molding; The product wall thickness of water-assisted...

Jeudi 10 mars 2022

Prix : 1000-6000USD

Precision Mould Parts Various high-precision parts As a precision molding company, we spare no efforts to provide precision moulded components to achieve our customers' satisfaction. If you have any questions about our parker precision molding, please do not hesitate to contact us...

Jeudi 10 mars 2022

Prix : 1000-6000USD

Hot Runner Mould for Pump Base Hot Runner Molds for Water Pump Bases The hot runner injection molding process is an advanced concept of thermal engineering which refers to moulds using a heated device to make them melt in the runner never solidify. We provide you with different types...

Mercredi 09 mars 2022

Prix : 100USD

Two shot molding, also called double shot moulding, dual shot injection molding，multi shot injection molding or 2k injection moulding is one category of injection molding using two different thermoplastic materials to produce injection molded parts in two colors or two components...

Mercredi 09 mars 2022

Prix : 100USD

Plastic molds are tools that are matched with plastic mold making machines in the plastic processing industry to give plastic products a complete configuration and precise dimensions. Due to the wide variety of plastics and processing methods, and the complex and simple structures...