GAS  WELL - 6667 Annonces

Jeudi 23 avril 2015

SV series single stage rotary vane vacuum pump is a kind of reliable, durable, economic and applicable range of vacuum equipment. In the circular pump body, it has an air suction valve and exhaust valve (stator). Thee vanes are equipped with an eccentric rotor slot in the rotor...

Mercredi 22 avril 2015

Product Information Roots-water ring vacuum system (JZJ type) consists of ZJ type roots vacuum pump and the backing pump,suh as 2BE/2BV/2SK series water ring vacuum pump. It can not only pump the common gas but also can pump the gas that contains vapor and a little dust. it is widely...

Mercredi 22 avril 2015

2BE series liquid ring vacuum pumps are usually used to suction the gas without solid particle, undissolved and noncorrosive gas to generate vacuum and pressure in the closed container. By changing the pump material, they can also be used to suction corrosive gas or use corrosive...

Mercredi 22 avril 2015

2XZ series direct-driven rotary vane vacuum pump is one of the main vacuum equipment pumping gas from the sealed container. It not only can be used alone, but also can be a backing pump of booster pump, diffusion pump, turbo molecular pump and titanium pump. It can be used for electric...

Mercredi 22 avril 2015

Product description: The equipment is widely used in aerospace, aviation, electronics and other industries components dealing. Using double water-cooled, electric lift, bell vertical stainless steel structure,three heating districts adopt Y -connection,type Y connection of three heating...

Mercredi 22 avril 2015

Main technical data of Induction vacuum hot-pressing furnace Model Effective Working dimension (mm) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW0 IF frequency (HZ) Working Pressure (T) Dimension (m) RVIY-60 200×250 ...)

Mercredi 22 avril 2015

Main technical data of Vacuum vapor deposition furnace Model Effective working dimension mm(Φ×H) Max temperature ( ℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIC-100 350×700 1800 7×10-1 0...

Mercredi 22 avril 2015

Main technical data of Vacuum induction high-temperature graphite furnace Model Effective working dimension mm(Φ×H) Max temperature(℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIG-100 200×300...

Mercredi 22 avril 2015

It is applied for vacuum quenching of high alloy steel such as high-speed tool steel,mould steel,gauge steel and cutlery steel.The machine can achieve in isothermal quenching & multi-grade quenching.With the function of convective heating,it can also be used as annealing and...

Mercredi 22 avril 2015

Vacuum degassing (VD) leads to high quality steel. The steel companies are adopting to Vacuum Degassing to improve the quality of steel required by customers for automotive, forging, rail industries etc. The VD process lasts approx. 20 Minutes and and is done at pressure of 0.5 torr ...

Mercredi 22 avril 2015

Product description: It is mainly used in the melting, rapid quenching or thrown belting process of Rare earth permanent magnetsNdFeB , hydrogen storage alloy, nickel base material, high temperature alloy etc.materials under the condition of vacuum or inert gas filling. Main configuration...

Mercredi 22 avril 2015

Product description: It is mainly used in the melting, rapid quenching or thrown belting process of Rare earth permanent magnets NdFeB , hydrogen storage alloy, nickel base material, high temperature alloy etc.materials under the condition of vacuum or inert gas filling. Main configuration...

Mercredi 22 avril 2015

Main technical data of Vacuum carburizing furnace Model Effective working dimension (mm) Loading capacity (Kg) Max temperature (℃) Ultimate pressure (Pa0 Pressure rising rate (Pa/h0 Heating Power (Kw) Temperature uniformity (℃) Gas Cooling pressure (bar) WZST-223...))

Mercredi 22 avril 2015

Main technical data of 1600C degree vacuum sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Temperature Uniformity(℃) RVSG-75G 300×250×500 1600 2×10-3 0.5 ±5 RVSG-100G 400×350×800 1600 2×10-3 0...

Mardi 21 avril 2015

Quantité : 1000 - Prix : negotiation

sapphire blades/jewel blade in Sen Hishi which are used in various control applications of hydraulics, water, chemicals and airflow. A well-controlled process ensures proper edges for inflow of material, followed by a precisely centered and polished hole to ensure proper flow of water or air...

Lundi 20 avril 2015

Quantité : 1000 - Prix : negotiation

sapphire and ruby rods/quartz rods Typical Applications: 1 Ultra-high pressure waterjet cutting; 2 Gas/liquid control switch; 3 Blood corpuscle analyzer; 4 ink-jet printing; 5 Flow Mete ; Details for reference: Surface roughness: Rz0.05 Material: Sapphire,magnesium fluoride,germanium...

Dimanche 19 avril 2015

Quantité : 100 units - Prix : Negotiable

Hitop est un ISO 9001: 2000 certifié fabricant de moules, privée avec une usine ultra-of-the-art production en Chine. Hitop vous donne les avantages de la baisse des coûts couplés aux normes d'ingénierie et de production élevées attendues dans la européen et nord-américain. La...

Samedi 18 avril 2015

Application: XLPE Insulated halogen-free low smoke flame-retardant power cable may prevent human from being suffocated by toxic gas generated from accidental burning of wire and cable.Such products do not catch fire easily and do not spread the fire or give off toxic gas when on fire...

Jeudi 16 avril 2015

Quantité : 1set - Prix : 30 400,00 €

- Specifications - 1.Suitable For Feed Factory And Especially For Fertilizer Factory; 2.Mixing Time Is 1-3 Minutes.The Homogenity Can Reach 10%. 1. It is suitable for feed factory and fertilizer factory, the best choice for fertilizer factory; < br /> 2. The mixing time is 1-3 minutes...

Jeudi 16 avril 2015

Quantité : 1set - Prix : 46400rmb

- Specifications - 1.Suitable For Feed Factory And Especially For Fertilizer Factory; 2.Mixing Time Is 1-3 Minutes.The Homogenity Can Reach 10%. 1. It is suitable for feed factory and fertilizer factory, the best choice for fertilizer factory; < br /> 2. The mixing time is 30-120s...

Jeudi 16 avril 2015

Quantité : 1set - Prix : 46400rmb

- Specifications - 1.Suitable For Feed Factory And Especially For Fertilizer Factory; 2.Mixing Time Is 1-3 Minutes.The Homogenity Can Reach 10%. 1. It is suitable for feed factory and fertilizer factory, the best choice for fertilizer factory; < br /> 2. The mixing time is 30-120s...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...