SPECIFICATIONS - 29809 Annonces

Vendredi 25 août 2023

The fully automatic one-step plastic film extrusion equipment is our company's patented product. Fully automatic film extrusion equipment: mainly used for processing various mixed plastic film materials to produce products, mixed waste plastic films: household garbage film, plastic...

Vendredi 25 août 2023

The waste shredder belongs to the technical field of waste treatment equipment, including a box body, two main shafts arranged side by side and parallel in the box body, several blade groups fixed on the main shaft and arranged at intervals, and a coupling shaft sequentially connected...

Vendredi 25 août 2023

Single Screw Plastic Waste Granulator The single screw waste plastic granulator is mainly suitable for extrusion and granulation of raw materials, which is not only clean or single with stable components and low moisture content, but also has no need for secondary plasticization,...

Jeudi 24 août 2023

For the PE category, it mainly includes milk bottles, food packaging boxes, laundry detergents, daily chemical products bottles, edible oil drums and oil bottles, etc., and PET bottle caps and bottle rings, daily necessities, etc. Specifications of Rigid Waste Plastic Scrap Washing...

Jeudi 24 août 2023

Quantité : 1000t/m - Prix : 25kg/bag

We are here to be your reliable partners of modified plastic. Engineering plastic is the high-performance plastic that can apply in different industrial areas, the higher mechanical strength and heat resistance of these modified plastics make them an excellent alternation of metal material...

Jeudi 24 août 2023

PSPD Series Reduce product wear, improve the lifetime of the products and reduce the noise Flexible contact with fragile workpieces, compensate for the height difference of workpieces Suitable for precise positioning of the oval suction cup Suitable for various working conditions...

Jeudi 24 août 2023

PSPT Series Improve the lifetime of the products and reduce the noise of the products Flexible contact with fragile workpieces, compensate for the height difference of workpieces Suitable for various working conditions Universal Level Compensator Oilless, wear-resistant bushing is...

Jeudi 24 août 2023

PSPH Series Reduce product wear, improve the lifetime of the products and reduce the noise Suitable for the workpieces with uneven surfaces and working conditions that need height compensation Suitable for precise positioning of the oval suction cup Suitable for various working conditions...

Jeudi 24 août 2023

Quantité : 1000Kgs - Prix : 400-800CNY

CA Series-330CA30 PEEK FC, CF PEEK carbon fiber reinforcement is suitable for the production of bushing seals and other products, can be faster from the bearing surface heat dissipation, at the same time has a high thermal deformation temperature (336 ° C) , also can maintain strength...

Jeudi 24 août 2023

The injection molding part is replacing metal products in many fields of industrial applications to meet the requirement of lightweight industrial equipment and cost-reduction. Green Vitality has accumulated many experiences over the years in providing a full spectrum of services...

Jeudi 24 août 2023

Prix : 0.003-50USD

Atlas metal is a manufacturer of spring, wire forming, and stamping parts for 15 years. There we provide bending stainless steel wire, spiral coil spring, wholesale stamping parts, and so on. "Meet the needs of our customers" is what we always dedicate to. Because of it, we improve...

Jeudi 24 août 2023

Prix : 0.003-50USD

Specifications of Laser Engraving Products Product Material AL1060, AL6061, AL6061, AL5052 Steel, mild steel, SPCC SS201, SS303, SS304, SS316, SS316L SPTE galvanized sheet Brass, copper Surface Treatment Anodized, powder coating, lacquer coating, black oxide, printing, matte...

Jeudi 24 août 2023

Prix : 0.003-50USD

Atlas metal has a CNC machining factory in Ningbo, we specialized in manufacturing precision machine parts. We equipped with numerous advanced machine equipment includes a CNC machining center, high-speed drilling and milling machining center, CNC lathe and ispection equipment including...

Jeudi 24 août 2023

Prix : 0.003-50USD

At Atlas metal, we manufacture premium quality custom springs that are used in a variety of applications. Spring types we produce include compression, extension, and torsion springs made from SAE or ASTM grade steel, stainless steel, or copper. Manufacturing capabilities include the...

Jeudi 24 août 2023

Prix : 0.003-50USD

We are all craftspeople manufacturing springs by core bar winding, hand winding and coiling machines based on the quantity. Not only normal types of springs with wires from 0.03mm up to 12mm in diameter but also various kinds of shapes for wire forms can be coiled by machines and hands...

Jeudi 24 août 2023

Prix : 0.003-50USD

The type of wire will depend on the application of the spring. Different materials work in different ways, contracting and extending at different rates. Our years of expertise enable us to advise which material best suits your application, which can often result in money saving options...

Jeudi 24 août 2023

Prix : 0.003-50USD

Extension springs store energy and exert a pulling force between two mechanisms. When mechanisms separate, the extension spring tries to bring them together again. Extension springs use round wire to create a close-wound design with initial tension. Specifications of Hook Extension...

Jeudi 24 août 2023

With the vigorous development of the automotive industry, plastic auto part mold is also developing rapidly. 90% of auto parts are produced by injection molds, which is a huge market opportunity for plastic auto parts manufacturers. Common large-size auto parts such as car bumpers...

Jeudi 24 août 2023

Quantité : 10000000pc - Prix : $0.16-$3

MDHC U Bottom 96 deep well round microplates are used in a variety of autosamplers and can be placed directly into the sample compartment of the autosampler to avoid the tedious work of repeated sample extraction compared to traditional sample injection vials. U Bottom 96 Deep Well...

Jeudi 24 août 2023

Quantité : 10000000pc - Prix : $0.16-$3

MDHC Sterilized Centrifuge Tubes are RNase free, DNase free and Pyrogen free., with plug-seal leak resistant screw caps, a large white writing area and printed graduation marks. Sterilized Centrifuge Test Tube Specifications Volume Item# Description Color Package Details 15ml...

Jeudi 24 août 2023

The automobile brake pad steel back spot welding machine adopts the intermediate frequency controller, which has high control precision, stable output current and saves power compared with the power frequency. The equipment has the function of single/continuous spot welding, and can...

Jeudi 24 août 2023

We offer stainless steel oil cooler that help improve overall system performance. SDZ Engine oil cooler meets almost all system requirements to maintain safe fluid operation temperatures to protect engine components. Stainless Steel Oil Cooler Features High grade stainless steel...

Jeudi 24 août 2023

Quantité : 1000TONS/M - Prix : $5-100/kg

ASTM B111 C71500 tube is a seamless Copper Nickel Alloy Tube of standard specifications for Water Desalting Plants. C70600 and C71500 alloys, however, are readily welded by the most common methods. Consumables of the alloy B111 C71500 materials should be used to weld both alloys...

Jeudi 24 août 2023

Quantité : 1000TONS/M - Prix : $5-100/kg

C70600 pipe/tube using UNS C70600 copper-nickel alloy is primarily used in seawater service as forged and machined valve and pump components, fittings, and hardware. The alloy UNS C70600 pipe is also used in applications where high corrosion resistance is required, and where chloride...

Jeudi 24 août 2023

Quantité : 1000TONS/M - Prix : $5-100/kg

ASTM B111 C44300 tube is widely used in the surface condenser, heat exchanger, and evaporators. The C44300 tube offers high strength, excellent corrosion resistance, and good creep resistance at elevated temperatures. SB111 C44300 TUBE SPECIFICATION COUNTRY STANDARD NAME ASTM...

Jeudi 24 août 2023

Quantité : 1000TONS/M - Prix : $5-100/kg

ASTM B338 Titanium Tube (Ti Tube) has a superior strength-to-weight ratio and corrosion resistance is one of the common titanium products. We generally divide ASTM B338/ ASME SB 338 Titanium tubes into two types, one is called the seamless titanium tube, and the other is called...

Jeudi 24 août 2023

Quantité : 1000TONS/M - Prix : $5-100/kg

ASTM B163 is the Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-exchanger Tubes. This covers outside diameter and average wall, or outside diameter and minimum wall tube. The tube shall be furnished in the alloys and conditions defined by this specification...

Jeudi 24 août 2023

Quantité : 1000kg - Prix : 400-800CNY

PEEK Color R&D Series can be customized according to the customer's own demand. Different PEEK plastic colors can be chosen for our PEEK raw material. Having good thermal stability, color consistency, high purity, and high-temperature resistance, our PEEK material color R...

Jeudi 24 août 2023

Quantité : 1000kg - Prix : 400-800CNY

CA Series-770CA30 carbon fiber filled PEEK reinforcement is widely used in automobile and aviation fields. It is widely used in automobile fuel pump and gearbox. It can help equipment reduce weight, reduce noise and increase the service life of wear-resistant parts, reduce or even...

Jeudi 24 août 2023

Quantité : 1000kg - Prix : 400-800CNY

CA Series-550CA30 PEEK carbon fiber reinforcement is a 30% carbon fiber reinforced PEEK plastic material, the addition of carbon fiber significantly increased the material's wear resistance and high temperature mechanical strength, thermal conductivity is pure resin G series 3 times...