SYSTEMS - 34083 Annonces

Vendredi 10 novembre 2023

Cold forging definition and cold forging meaning: Cold forging provided by WALKSON cold forging factories is a kind of forming processing for materials below recrystallization temperature, it is forged below recovery temperature. Forging without heating blank is called cold forging...

Vendredi 10 novembre 2023

At present, our machining shop, providing production cnc machining, as well as cnc machining and manufacturing services, has more than 50 kinds of processing equipment, including more than 8 high-precision equipment such as machining center, 1 imported horizontal machining center...

Vendredi 10 novembre 2023

The main function of the EDFA optical amplification subsystem launched by Guangzhou Sintai Co., Ltd is to compensate the signal's optical power in the transmission link, which can finally extend the optical signal transmission distance. It can be divided into BA, LA, and PA based...

Vendredi 10 novembre 2023

The integrated DWDM/CWDM platform of OTNS8600 Ⅰ type optical transmission network system is mainly used in the metro area access layer network, and it can complete the function such as optical fiber saving, service multiplexing, and distance extension, solve the shortage of fiber...

Vendredi 10 novembre 2023

The DWDM multiplexer/demultiplexer launched by Guangzhou Sintai Communication Co., Ltd. is designed for multi-wavelength demux application. It works on an ITU grid with 100 GHz channel spacing based on thin-film filter (TFF) technology. The wavelength range of DWDM is from 1525nm...

Vendredi 10 novembre 2023

The CWDM multiplexer/demultiplexer launched by Guangzhou Sintai Communications Co., Ltd. is designed for economical and efficient multi-wavelength CWDM network applications. It is based on thin-film filter (TFF) technology and operates on ITU grids with 20nm channel spacing. The CWDM...

Vendredi 10 novembre 2023

CWDM technology provides the flexibility to increase capacity of existing fiber infrastructure by enabling multiple channels/wavelengths over the same fiber cabling. Each channel carries data independently from each other, allowing network designers to transport different data rates...

Vendredi 10 novembre 2023

10G OTU service card launched by Sintai Communication Co., Ltd. supports four types of service access with 42M~11.3G rates. Its main function is to finish the 3R regeneration of any 5-channel signals under any protocol within the rate of 1.25 Gbit/s~11.3 Gbit/s to be accessed, and...

Vendredi 10 novembre 2023

DRIP IRRIGATION DRIPPER In the drip irrigation system, the device that changes the pressure water flow in the capillary into a drip or fine flow through the flow channel or orifice is called irrigation drippers or irrigation emitters. Most drippers are made of plastic. The commonly...

Vendredi 10 novembre 2023

DRIP IRRIGATION ADAPTER OR CONNECTOR We produce these drip irrigation tubing connector: single adapter for soft pipe, double straight adapters for soft pipe, double adapters for three branches, four adapters for five branch and four adapters for six branch . Drip Irrigation Pipe/Tape/Line...

Vendredi 10 novembre 2023

CENTRIFUGAL FILTER Centrifugal filtration equipment separates particles of different densities by gravity & centrifugal force principles. The centrifugal filter has outstanding performance for large particles filtration. The centrifugal filter is made of PP material to resistant corrosion...

Vendredi 10 novembre 2023

BEND ARROW DRIPPER Seapeak is specialied in manufacturing bend arrow dripper. For more information china irrigation dripper and drip irrigation system, please feel free to contact us Localisation : 313 Heji Guangchang No. 666 Ganjiang Road Suzhou City Jiangsu China, 215002 suzhou...

Vendredi 10 novembre 2023

ARROW DRIPPER china arrow dripper is a kind of dripper commonly used in drip irrigation, which is also called stake dripper. There are usually two kinds of arrow drippers, including curved arrows and straight arrows. The length of the drip arrow part is about 10cm which is used to...

Vendredi 10 novembre 2023

IRRIGATION SYSTEM MANUFACTURER FROM CHINA In the past, if you wanted to grow more, you needed more fertilizer, labor and land. As a professinal irrigation system company, Seapeak supplies types of watering irrigation systems which are to precisely reverse this age-old relationship...

Jeudi 09 novembre 2023

Quantité : 1200sets/y - Prix : USD10000-200000

KD-DC430A(B, C) CNC EDM Drillig Machine Features - The system adopts a touch screen industrial control computer and Win7 operating system. It runs fast and can process massive data at the same time. - With a rich data interface, the system can directly import data and edit it through...

Jeudi 09 novembre 2023

Quantité : 1200sets/y - Prix : USD10000-200000

CNC wire cut EDM machine KD400GL has Kingred's own designed mechanical structure and lasted developed PLC-controlled system running at the latest Windows platform. Heavy-duty “C” structure and “T” shape machine bed with good rigidity to make sure accuracy of cutting, long-term accuracy...

Jeudi 09 novembre 2023

Quantité : 1200sets/y - Prix : USD10000-200000

KD series high precision wire edm is featured with “C” structure, “T” shape machine bed, 4 axis/6 axis AC servo motor control, and 5 axis PLC control system on latest Windows platform. With technology of multiple cuts to get good performance of surface finish and precision. High Precision...

Jeudi 09 novembre 2023

Quantité : 1200sets/y - Prix : USD10000-200000

DK77 series high speed wire cut EDM has non-resistors HF power with Max cutting speed higher than 300mm2/min, Max cutting thickness is higher than 1000 mm. High accuracy linear guide way, ball screw and strong machine body with good rigidity to make sure good performance of cutting accuracy...

Jeudi 09 novembre 2023

Quantité : 1200sets/y - Prix : USD10000-200000

P40 CNC EDM machine has three axis simultaneous control and 4th generation electrical discharging control system, best surface finish Ra≤0.12μm, Min. electrode wear ≤0.05%, standard equipped with 50A controller and Max machining efficiency ≥500mm3/min. Good performance, favorable...

Jeudi 09 novembre 2023

Quantité : 1 - Prix : 1,00 €

Application La mesure des forces d'ouverture et de verrouillage des capsules de bouteilles revêt une importance significative en tant que paramètres techniques en ligne et hors ligne dans la production. Ces forces peuvent avoir un impact direct sur la facilité de transport des produits...

Jeudi 09 novembre 2023

Quantité : 1 - Prix : 1,00 €

Arrière-plan Une propriété essentielle des matériaux barrières flexibles est leur capacité à résister à des contraintes répétitives, appelée durabilité à la flexion ou résistance Gelboflex. Une forte résistance aux fissures de flexion est essentielle car elle réduit le risque de perforation...

Jeudi 09 novembre 2023

Quantité : 1 - Prix : 1,00 €

Arrière-plan Une propriété essentielle des matériaux barrières flexibles est leur capacité à résister à des contraintes répétitives, appelée durabilité à la flexion ou résistance Gelboflex. Une forte résistance aux fissures de flexion est essentielle car elle réduit le risque de perforation...

Jeudi 09 novembre 2023

Quantité : 1 - Prix : 1,00 €

Arrière-plan Une propriété essentielle des matériaux barrières flexibles est leur capacité à résister à des contraintes répétitives, appelée durabilité à la flexion ou résistance Gelboflex. Une forte résistance aux fissures de flexion est essentielle car elle réduit le risque de perforation...

Jeudi 09 novembre 2023

Quantité : 1 - Prix : 1,00 €

Arrière-plan La CEI 60068-2-75 est une norme internationale qui concerne spécifiquement les tests de robustesse mécanique des équipements et des produits. Cette norme décrit les méthodes d'essai permettant de déterminer la capacité d'un échantillon à résister à des impacts rigoureux et rigoureux...

Jeudi 09 novembre 2023

Quantité : 1 - Prix : 1,00 €

Application Le testeur de force et de rapport de retrait FSR-01 sert à mesurer à la fois les forces de retrait et le taux de retrait des films thermorétractables. Ces films sont généralement créés par extrusion et étirage (étirage à chaud) au cours de leur processus de fabrication...

Jeudi 09 novembre 2023

Quantité : 1 - Prix : 1,00 €

Le testeur de friction et de pelage FPT-01 est un appareil polyvalent et multifonctionnel conçu pour diverses applications : Mesure du coefficient de friction : il mesure avec précision les coefficients de friction statiques et cinétiques pour une large gamme de matériaux, notamment...

Jeudi 09 novembre 2023

Quantité : 1 - Prix : 1,00 €

Testeur d'impact de fléchettes tombantes FDT-01 Arrière-plan La résistance aux chocs est un paramètre crucial pour évaluer la qualité des films plastiques. Il joue un rôle important dans la détermination de la capacité d'un film à résister aux forces et impacts externes, qui peuvent...

Jeudi 09 novembre 2023

Prix : $2.5/kg-6.8/kg

In the petrochemical industry, special working environments such as high temperature and corrosive media can make corrosion more serious. The consequences of corrosion are also more serious, such as the leakage of toxic and harmful substances and flammable and explosive substances...

Jeudi 09 novembre 2023

Prix : $2.5/kg-6.8/kg

The anti-corrosion coating solution for steel structure buildings is mainly made according to ISO12944, including serving life, corrosion environment, structural design, surface treatment, coating system, coating product performance, construction supervision and the solution plan...

Jeudi 09 novembre 2023

Prix : $2.5/kg-6.8/kg

Zinc powder is the most important electrochemical antirust pigment. A primer made with a large amount of zinc powder is called a zinc-rich primer. Zinc-rich paint is divided into an inorganic zinc rich primers with silicate as binder and epoxy zinc-rich primer with epoxy resin as a binder...