MOLDS - 4559 Annonces

Samedi 02 mars 2024

HHC-0777 Copper Deep Drawing Brass Parts Material: Copper Process: Deep Drawing Finish: Cleaning About HHC-0777 Deep Drawing Copper Parts A copper sleeve lead cap is a part manufactured using a stamping and turning process, usually made of copper material. The part has a sleeve...

Vendredi 01 mars 2024

Prix : USD3000-200000

Plastic Household Mould The smart switches and smart sockets of the smart home systems have the same specifications as normal power switches and sockets. Therefore, there is unnecessary to damage the wall, rewire, or buy new electrical equipment. It can replace the original wall switches...

Vendredi 01 mars 2024

Prix : USD3000-200000

Molding Over Molding & 2k Molding The same type of material of different colors is usually used for two-color injection molding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements...

Vendredi 01 mars 2024

Prix : USD3000-200000

Multi Cavity Mold The runner filling balance must be considered when designing the multi-cavity mold in order to ensure the best effect of filling balance, the multi cavity plastic mold will be multiple of 4 to design the mold generally, such as 4. 8. 16. 32. 64. 128 points, etc. ...

Vendredi 01 mars 2024

Prix : USD3000-200000

Medical Pipette Tip Mold USM as a medical plastic injection mold supplier provides products including medical device plastic parts, suction tips, blood collection devices, pregnancy test sticks, culture tubes, ventilator masks, etc. All plastic parts which will be used in the medical...

Vendredi 01 mars 2024

Prix : USD3000-200000

Medical Injection Mold For medical plastic injection molding companies, it means that medical supervisors are required to supervise and manage the materials used to manufacture the equipment, the medical injection molds parts are designed to withstand high temperatures and chemical corrosion...

Vendredi 01 mars 2024

Prix : USD3000-200000

Insert Molding Parts The combination of easy plasticity and elasticity of plastic and rigidity, strength and heat resistance of metal can be firmly made into a complex and exquisite metal-plastic integrated product, it can also reduce product size and weight; The combination of plastic...

Vendredi 01 mars 2024

Prix : USD3000-200000

Insert Mold USM molds focus on structural parts injection molds, water-assisted Gas-assisted injection molds, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product injection molding...

Vendredi 01 mars 2024

Prix : USD3000-200000

gas injection moulding manufacturers gas injection moulding / gas assist injection moulding / gas assist molding gas injection mold / gas injection mould gas assist injection molding design guide Water & Gas Injection Mold Since the thermal conductivity and heat capacity of water...

Vendredi 01 mars 2024

SRB Super Industrial Flooring SRB flooring has strong anti fouling, anti oil, and anti chemical corrosion properties. The surface is coated with special materials, which are resistant to NMP (N-methylpyrrolidone), hydrofluoric acid, graphite, etc. At the same time, it has a protective...

Vendredi 01 mars 2024

Non-slip Flooring The safety principle of Kunhong's all-weather multifunctional slip resistant epoxy resin flooring and slip resistant epoxy coating is to increase the height of the physical anti slip layer on the ground, so even if oil is poured onto the colofo floor anti slip floor...

Vendredi 01 mars 2024

LINKPLUS Safety syringe injection molding are designed to manufacture syringes with built-in safety mechanisms. These molds come in different shapes and sizes and are manufactured with precise details to ensure uniformity and consistency in the production process, achieving the highest...

Jeudi 29 février 2024

BMW logo sign needs to use the existing mold blister during production, with two layers of blister, one layer of transparent board and one layer of milky white board. The mold requires good precision and high quality, because the precision and quality of the mold itself are directly...

Jeudi 29 février 2024

Googbong Benelli Sign can be made of imported arcylic(PMMA), ABS, Plastic, etc. The process of making Benelli Sign includes vacuum forming and vacuum coating. We are professional manufacturers in customized Benelli Sign, and we can offer standard molds, which can save costs for customers...

Jeudi 29 février 2024

Model: YPO-6480-300 Main Parameters: Volume: 6480L Inner size: 1.8*2.0*1.8m (w*h*d) Temperature range: RT+25℃～200℃/300℃ Temperature fluctuation: ±0.3℃ Temperature uniformity: ±2％℃ Description of Industrial Drying Oven For Varnish Motors Industrial drying ovens for varnish motors...

Jeudi 29 février 2024

Hot air ovens (also called industrial rubber hot air oven are used for product's drying, curing and high temperature aging test. The hot air drying oven is mainly applied in chemical, electronic communication, plastics, cable, electroplating, hardware, automotive, photoelectron, rubber products...)

Samedi 24 février 2024

The unit is suitable for the high-speed production of high density polyethylene (HDPE), low density polyethylene (LDPE) plastic film, and is widely used in food, clothing, textiles, daily necessities and other civilian products and industrial products packaging. FEATURES FEATURES...

Samedi 24 février 2024

The unit is suitable for the high-speed production of high density polyethylene (HDPE), low density polyethylene (LDPE) plastic film, and is widely used in food, clothing, textiles, daily necessities and other civilian products and industrial products packaging. FEATURES FEATURES...

Samedi 24 février 2024

This high and low pressure film blowing unit is suitable for the production of high density polyethylene (HDPE), low density polyethylene (LDPE) plastic film, widely used in food, clothing, textiles, daily necessities and other civilian products and industrial products packaging....

Samedi 24 février 2024

Scalp Vein Set Mold is typically designed to create precise and consistent butterfly shapes for scalp vein sets used in venipuncture procedures, such as blood withdrawal or intravenous medication administration. LINKPLUS is a medical device manufacturer that produces Scalp Vein Set...

Samedi 24 février 2024

pen insulin syringe molds are used in the production of insulin pen needles. These molds are typically made of high-quality steel or aluminum to ensure accuracy, precision, and durability in the manufacturing process. The mold design features a series of cavities that are used to...

Samedi 24 février 2024

The LINKPLUS Needle Mold is a specialized tool used in the production of medical needles. It is designed with advanced technology to ensure high precision, uniform size, and consistency, yielding high-quality medical needles. WHAT IS NEEDLE MOLD USED FOR? Needle mold is used for...

Vendredi 23 février 2024

Quantité : 5000-40,00 - Prix : USD10-USD2,000/pc

E-Grind developed chisel point diamond dresser widely used in many metalwork industries like auto parts, engine and engine parts, mold, cutting tools, and other precision parts. Our products greatly help our grinding wheel to provide perfect performance in cylindrical grinding, centerless...

Vendredi 23 février 2024

Quantité : 5000-40,00 - Prix : USD10-USD2,000/pc

E-Grind Abrasives developed diamond blade cut off wheel/CBN cut off blade for grinder to achieve more efficient and precision cutting. Our general bond can be used for both wet cutting and dry cutting. E-Grind Diamond cut off wheel for grinder is for cutting carbide, alloy material...

Vendredi 23 février 2024

Quantité : 5000-40,00 - Prix : USD10-USD2,000/pc

As one of the reputable abrasive grinding wheel manufacturers, E-Grind provides different all types of grinding wheel and Cubic Boron Nitride (CBN) grinding wheels, which are widely used in the woodworking industry, tool making, bearing, gear, mold and die, automobile, aerospace,...

Vendredi 23 février 2024

Anti Molds for Cabinet As a experienced supplier in this field for over 10+ years, Kobso Multi-function Anti-mold agent is increasingly supported by many wood and leather product manufacturers in furniture industry. Sofas and other soft furniture use a lot of sponge. If the air...

Vendredi 23 février 2024

In the clothes industry, most of the fabrics, especially natural fabrics, are prone to mold. Based on the 10+ year experiment for the anti-mold field, KOBSO Mold Prevention Packing Paper is widely use in clothes industry, packing on the products surface, release anti mold fabric...

Vendredi 23 février 2024

Anti-mold desiccants are materials used to absorb moisture and prevent mold growth in products and environments. They work by reducing the humidity level in the surrounding air, making it difficult for mold spores to grow and spread. Common anti-mold desiccants include silica gel...

Vendredi 23 février 2024

Activated Carbon Desiccant The role of activated carbon depends on its own adsorption function, which can effectively adsorb. Hazardous substances and odors floating in the air in a free state. Made of bamboo as raw material, fast adsorption, high adsorption capacity, iodine value...

Vendredi 23 février 2024

Bulk Desiccant for Sale Kobso was established in Hong Kong, and its production base is located in Jinjiang City, Fujian Province. The desiccants we produce have stable and efficient drying effects, and are environmentally friendly. Kobso mold prevention mainly produce Moisture-proof...